Chat Live
Contact Us
sales@valuetronics.com
Request a Quote To Get An EDU Discount
Couldn't load pickup availability
The Tektronix TCP0030A is a 30 A AC/DC current probe built for direct connection to oscilloscopes equipped with the TekVPI probe interface. It is a high-performance, easy-to-use probe that delivers greater than 120 MHz of bandwidth with selectable 5 A and 30 A measurement ranges, and it adds exceptional low-current measurement capability down to 1 mA for demanding current-measurement work.
The TCP0030A is applied across a broad set of current-measurement tasks. Listed applications include power supplies, semiconductor devices, power inverters and converters, electronic ballasts, industrial and consumer electronics, mobile communications, motor drives, and transportation systems — wherever AC or DC current needs to be captured accurately on an oscilloscope.
ValueTronics stocks the TCP0030A in its own 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.
Tektronix, founded in 1946, was acquired by Danaher Corporation in 2007 and became part of Fortive Corporation when Fortive was spun off from Danaher in 2016. The Tektronix brand has remained in continuous use throughout these ownership changes.
| Specification | Value |
|---|---|
| Electrical characteristics | |
| Bandwidth | DC to ≥120 MHz |
| Rise time | ≤2.92 ns |
| Maximum DC current | 30 A |
| Maximum RMS current | 30 A |
| Maximum peak pulse current | 50 A |
| Maximum bare wire voltage | 150 V CAT II, (insulated wire 300 V CAT II) |
| Sensitivity | 1 mA (on oscilloscopes that support 1 mV/div setting) |
| DC accuracy | ±1% typical; ±3% warranted |
| Maximum Amp-Second product | 500 A*µs (in 30 A range) |
| Insertion impedance | 1 mΩ at 10 kHz; 3.5 mΩ at 100 kHz; 0.08 Ω at 1 MHz; 0.15 mΩ at 10 MHz; 0.7 Ω at 100 MHz; 0.85 Ω at 120 MHz |
| Signal delay | 14.5 ns |
| Current ranges | 5 A and 30 A |
| Power requirements | Powered directly by oscilloscopes with the TekVPI interface |
| Physical characteristics | |
| Probe head Length | 20 cm (7.77 in) |
| Probe head Width | 1.6 cm (0.625 in) |
| Probe head Height | 3.2 cm (1.25 in) |
| Maximum conductor size | 5 mm (0.197 in) |
| Cable Length | 200 cm (79 in) |
| Shipping Weight | 1.55 kg (3.44 lb) |
| EMC environment and safety | |
| Temperature, Operating | 0 °C to 50 °C (32 °F to 122 °F) |
| Temperature, Nonoperating | -40 °C to +75 °C (-40 °F to 167 °F) |
| Humidity, Operating | 5% to 95% Relative Humidity (RH) at up to +30 °C; 5% to 85% RH above 30 °C up to +50 °C, noncondensing |
| Humidity, Nonoperating | 5% to 95% Relative Humidity (RH) at up to +30 °C; 5% to 85% RH above 30 °C up to +75 °C, noncondensing |
| Altitude, Operating | Up to 3,000 m (10,000 ft.) |
| Altitude, Nonoperating | Up to 12,192 m (40,000 ft.) |
| Compliance labeling | CE (European Union), WEEE (European Union) |
| Warranty | One year parts and labor |
Important: Maximum bare-wire voltage: 150 V CAT II (300 V CAT II with insulated wire).
Important: TCP0030A is designed for direct connection to oscilloscopes with the TekVPI probe interface and is powered directly by the oscilloscope; it is not a standalone instrument and requires a compatible TekVPI oscilloscope to operate.
Important: For best support, download and install the latest version of the oscilloscope software from www.tek.com.
Important: The Current Loop, 1 Turn, 50 Ω with BNC connector (order 067-2396-00) used for Performance Verification is a recommended accessory and is not included with the probe.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Tektronix
Condition
Pre-Owned
Manufacturer
Tektronix
Curr_prob_freq
120 MHz
MDO3104 Tektronix Mixed Domain Oscilloscope Used
MDO3104
MDO3102 Tektronix Mixed Domain Oscilloscope Used
MDO3102
MDO3054 Tektronix Mixed Domain Oscilloscope Used
MDO3054
MDO3034 Tektronix Mixed Domain Oscilloscope Used
MDO3034
MDO3052 Tektronix Mixed Domain Oscilloscope Used
MDO3052
MDO3032 Tektronix Mixed Domain Oscilloscope Used
MDO3032
MDO3024 Tektronix Mixed Signal Oscilloscope Used
MDO3024
TDP3500 Tektronix Differential Probe Used
TDP3500
MDO3014 Tektronix Mixed Domain Oscilloscope Used
MDO3014
TAP3500 Tektronix Active Probe Used
TAP3500
Tektronix TCP404XL 500 A, 2 MHz AC/DC Current Probe (Requires TCPA400 Amplifier) (Pre-Owned)
TCP404XL
TAP2500 Tektronix Active Probe Used
TAP2500
TDP1000 Tektronix Differential Probe Used
TDP1000
TDP1500 Tektronix Differential Probe Used
TDP1500
MDO3022 Tektronix Mixed Domain Oscilloscope Used
MDO3022
TDP0500 Tektronix Differential Probe Used
TDP0500
MDO3012 Tektronix Mixed Domain Oscilloscope Used
MDO3012
THDP0100 Tektronix Differential Probe Used
THDP0100
MSO2024B Tektronix Mixed Signal Oscilloscope Used
MSO2024B
MSO2014B Tektronix Mixed Signal Oscilloscope Used
MSO2014B
TAP1500 Tektronix Active Probe Used
TAP1500
TCP0020 Tektronix Current Probe Used
TCP0020
TCP2020 Tektronix Current Probe Used
TCP2020
MSO2004B Tektronix Mixed Signal Oscilloscope Used
MSO2004B
Tektronix P6015A 1000X High-Voltage Passive Probe, 75 MHz (Pre-Owned)
P6015A
DPO2024B Tektronix Digital Oscilloscope Used
DPO2024B
ADA400A Tektronix Probe Amplifier Used
ADA400A
TMDP0200 Tektronix Differential Probe Used
TMDP0200
DPO2014B Tektronix Digital Oscilloscope Used
DPO2014B
DPO2022B Tektronix Digital Oscilloscope Used
DPO2022B
TCP305A Tektronix Current Probe Used
TCP305A
THDP0200 Tektronix Differential Probe Used
THDP0200
DPO2004B Tektronix Digital Oscilloscope Used
DPO2004B
MSO2002B Tektronix Mixed Signal Oscilloscope Used
MSO2002B
P5205A Tektronix Differential Probe Used
P5205A
DPO2012B Tektronix Digital Oscilloscope Used
DPO2012B
TBS2104B Tektronix Digital Oscilloscope Used
TBS2104
TPP1000 Tektronix Voltage Probe Used
TPP1000
MDO3COMP Tektronix Module Used
MDO3COMP
MDO3USB Tektronix Module Used
MDO3USB
Tektronix P5100A 100X High-Voltage Passive Probe, 500 MHz (Pre-Owned)
P5100A
TPP0500B Tektronix Voltage Probe Used
TPP0500B
TPP0250 Tektronix Voltage Probe Used
TPP0250
DPO2002B Tektronix Digital Oscilloscope Used
DPO2002B
TBS2102 Tektronix Digital Oscilloscope Used
TBS2102
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
