Chat Live
Contact Us
sales@valuetronics.com
The Rohde & Schwarz ZV-Z218 Calibration Kits for Network Analyzer from Rohde & Schwarz - Individual calibration standards Open, Short, Match, Through each in male and female - Connector types: 1.85 mm female and male - High end accuracy with data based characterization data (individual S-parameters delivered with each kit).
Represent warranted product performance by means of a range of values for the specified parameter. These specifications are marked with limiting symbols such as <, ≤, >, ≥, ±, or descriptions such as maximum, limit of, minimum. Compliance is ensured by testing or is derived from the design. Test limits are narrowed by guard bands to take into account measurement uncertainties, drift and aging, if applicable.
Represent warranted product performance for the specified parameter. These specifications are not specially marked and represent
values with no or negligible deviations from the given value (e.g. dimensions or resolution of a setting parameter). Compliance is ensured
by design.
Characterizes product performance by means of representative information for the given parameter. When marked with <, > or as a
range, it represents the performance met by approximately 80 % of the instruments at production time. Otherwise, it represents the mean
value.
Characterize product performance by means of a representative value for the given parameter (e.g. nominal impedance). In contrast to
typical data, a statistical evaluation does not take place and the parameter is not tested during production.
Characterize expected product performance by means of measurement results gained from individual samples.
Represent limits of measurement uncertainty for a given measurand. Uncertainty is defined with a coverage factor of 2 and has been
calculated in line with the rules of the Guide to the Expression of Uncertainty in Measurement (GUM), taking into account environmental
conditions, aging, wear and tear.
Device settings and GUI parameters are indicated as follows: "parameter: value".
Typical data as well as nominal and measured values are not warranted by Rohde & Schwarz.
In line with the 3GPP/3GPP2 standard, chip rates are specified in Mcps million chips per second (Mcps), whereas bit rates and symbol
rates are specified in million bits per second (Mbps), thousand bits per second (kbps) or thousand symbols per second (ksps), and
sample rates are specified in million samples per second (Msample/s). Mcps, kbps, ksps and Msample/s are not SI units.
*The image is for reference only. See product specification for details.
Model No
Rohde
Condition
New
Manufacturer
Rohde & Schwarz
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
