Chat Live
Contact Us
sales@valuetronics.com
The Tektronix TCP202 is a DC coupled current probe designed to display and measure current in electronic circuits. It is a general-purpose probe that, when combined with a Tektronix TDS oscilloscope, enables direct-readout DC and AC current measurements that are accurately displayed and recorded. The probe connects directly to a TDS scope through the TEKPROBE BNC interface and draws its power from the oscilloscope, so no separate power supply is needed.
The TCP202 is suited to power supply and motor drive design and to device testing. Typical applications include motor drives, switching power supplies, disk drives, electronic ballasts, inverters, and avionics.
ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.
| Specification | Value |
|---|---|
| Characteristics | |
| Bandwidth | DC to 50 MHz |
| Max DC + Peak AC Current | 15 A |
| Max Peak Pulse Current | 50 A |
| Minimum Sensitivity | 10 mA/div |
| DC Accuracy | ±1% (with probe calibrator); ±3% (without probe calibrator) |
| Max Bare Wire Voltage | 300 V (CAT I) |
| Typical Characteristics | |
| Insertion Impedance | 0.002 Ω at 1 kHz; 0.1 Ω at 5 MHz |
| Propagation Delay | 17 ns |
| Max Conductor Diameter | 3.8 mm (0.15 in.) |
| Electrostatic Immunity (per IEC 801-2) | >8 kV |
| Ampere-Sec Product | 500 x 10-6 Amp*Sec |
| Rise Time | ≤7.0 ns |
| Physical Characteristics | |
| Weight | 0.19 kg (0.44 lbs.) |
| Cable Length | 2.2 m (7.2 ft.) |
| Power Requirements | TCP202 is powered by the TDS oscilloscope via the TEKPROBE interface |
| Safety | |
| Standards | UL 3111-1, CSA1010.1, EN61010-1, IEC61010-1, EN61010-2-032, IEC61010-2-032 |
Important: Maximum bare wire voltage: 300 V (CAT I).
Important: DC accuracy is normally ±3%; it can be improved to ±1% only when the probe is calibrated using the optional Probe Calibrator (P/N 015-0672-50), which is functional only with TDS500, TDS600 or TDS700 Series oscilloscope calibrator pins.
Important: The Probe Calibrator (015-0672-50), required to achieve ±1% accuracy, is a Recommended Accessory and is not included with the base probe.
Important: For TCP202 operation with TDS400, TDS500, TDS600 and TDS700 Series oscilloscopes other than those listed, the scale factor will be correct but the measurement will be indicated as V instead of A.
Important: TDS5000/TDS5000B, TDS6000/TDS6000B and TDS7000/TDS7000B Series oscilloscopes require a TCA-BNC adapter for use with the TCP202.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Tektronix
Condition
Pre-Owned
Manufacturer
Tektronix
Curr_prob_freq
DC to 50 MHz
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
