Chat Live
Contact Us
sales@valuetronics.com
The Siglent SHS1202X is a 200 MHz, 2-channel digital oscilloscope from the SHS1000X / SHS800X Series — part of Siglent's Super Phosphor Oscilloscope family. In summary, this is a 8-bit-resolution, 1 GSa/s (500 MSa/s dual-ch)-sample-rate instrument intended for general benchtop signal capture, mixed-signal debug, serial-bus decoding, and power-supply characterization.
The SHS1202X is used to capture, view, measure, and analyze electrical waveforms up to 200 MHz. Typical applications: embedded system debug, power-rail characterization, motor and inverter waveform inspection, audio and sensor signal analysis, education, and serial-bus decoding for the protocols listed below.
Edge, Slope, Pulse Width, Window, Runt, Interval, Time-out (Dropout), Pattern. Video trigger / HDTV. Standard serial: I2C, SPI, UART, CAN, LIN.
Data analysis functions include: Search and Navigate; History waveform record up to 80,000 frames; 38 auto measurements with statistics, zoom, gating, Math, History, Reference; 1 Mpts FFT with peaks and markers; Math (+, −, ×, ÷, ∫, d/dt, √). Acquisition and measurement: 12 Mpts record memory with all sampled points available to Math; Security Erase mode; SCPI remote control over isolated USB. The SHS1202X delivers 1 GSa/s (500 MSa/s dual-ch) real-time sampling and 12 Mpts of record length — sufficient to capture long-duration events while preserving timebase resolution for zoom inspection.
Siglent's handheld line is the value-tier field instrument — IP51-rated for industrial use but, importantly, not CAT III/IV certified, so it is not a Fluke ScopeMeter substitute on mains or distribution panels. The right call for low-voltage electronic service, automotive electronics, and field engineering where occasional waveform viewing is needed alongside a DMM.
The SHS1202X acquisition and analysis specifications are listed below. Where the SHS1000X / SHS800X Series family shares architecture across its members, model-specific differences are concentrated in bandwidth, channel count, and (for HD-series) ADC vertical resolution.
| Specification | Value |
|---|---|
| Analog Channels | 2 |
| Bandwidth | 200 MHz |
| Max Sample Rate | 1 GSa/s (500 MSa/s dual-ch) |
| Vertical Resolution (ADC) | 8-bit |
| Record Length | 12 Mpts |
| Additional Capability | Isolated, IP51, 6000-count DMM, 6900 mAh battery |
Edge, Slope, Pulse Width, Window, Runt, Interval, Time-out (Dropout), Pattern. Video trigger / HDTV. Standard serial: I2C, SPI, UART, CAN, LIN.
12 Mpts record memory with all sampled points available to Math; Security Erase mode; SCPI remote control over isolated USB.
Data analysis: Search and Navigate; History waveform record up to 80,000 frames; 38 auto measurements with statistics, zoom, gating, Math, History, Reference; 1 Mpts FFT with peaks and markers; Math (+, −, ×, ÷, ∫, d/dt, √).
All Factory New Siglent oscilloscopes ship with a factory calibration and certificate as standard. Optional upgrade calibration paths (NIST Traceable, NIST Traceable with Full Data, ISO/IEC 17025 Accredited) can be added at the time of order — please specify your required calibration tier on the order, and ValueTronics will route the unit through the appropriate calibration lab prior to shipment.
This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
SHS1202X
Condition
New
Manufacturer
Siglent
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
