SDS3054X HD Siglent Digital Oscilloscope Pre-Owned

Overview

The Siglent SDS3054X HD is a 500 MHz, 4-channel digital oscilloscope from the SDS3000X HD Series — part of Siglent's Super Phosphor Oscilloscope family. In summary, this is a 12-bit-resolution, 4 GSa/s-sample-rate instrument intended for general benchtop signal capture, mixed-signal debug, serial-bus decoding, and power-supply characterization.

What is the SDS3054X HD used for?

The SDS3054X HD is used to capture, view, measure, and analyze electrical waveforms up to 500 MHz. Typical applications: embedded system debug, power-rail characterization, motor and inverter waveform inspection, audio and sensor signal analysis, education, and serial-bus decoding for the protocols listed below.

What can it trigger on and decode?

Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay, Video (HDTV), Zone Trigger. Serial: I2C, SPI, UART, CAN, LIN, CAN FD, CAN XL, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester, ARINC429, SpaceWire, USB 2.0, SPMI.

Factual grounding — measurement and analysis

Data analysis functions include: Search, Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot, Power Analysis. Acquisition and measurement: Sequence up to 80,000 segments; History up to 80,000 frames; 50+ auto measurements; 4 Math traces (4 Mpts FFT, Filter, +, −, ×, ÷, ∫, d/dt, √); hardware Average, ERES, Mask Test. The SDS3054X HD delivers 4 GSa/s real-time sampling and 400 Mpts/ch of record length — sufficient to capture long-duration events while preserving timebase resolution for zoom inspection.

Industry positioning

The SDS3000X HD is the 12-bit answer at 1 GHz in a 10" chassis — narrower than the SDS5000X HD but with sharper Sequence-mode capture rates. The right pick when 4 channels and 1 GHz are enough and bench real estate is at a premium.

Accessories Supplied

• Oscilloscope main unit
• AC power cord (region-appropriate)
• Passive probes (one per analog channel; bandwidth-matched to the unit)
• USB cable (USB-TMC compliant)
• Quick Start guide / Programming guide reference card
• Certificate of calibration

Product Core & Specifications

The SDS3054X HD acquisition and analysis specifications are listed below. Where the SDS3000X HD Series family shares architecture across its members, model-specific differences are concentrated in bandwidth, channel count, and (for HD-series) ADC vertical resolution.

Acquisition

Trigger and Serial Decode

Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay, Video (HDTV), Zone Trigger. Serial: I2C, SPI, UART, CAN, LIN, CAN FD, CAN XL, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester, ARINC429, SpaceWire, USB 2.0, SPMI.

Math, Measurement, and Analysis

Sequence up to 80,000 segments; History up to 80,000 frames; 50+ auto measurements; 4 Math traces (4 Mpts FFT, Filter, +, −, ×, ÷, ∫, d/dt, √); hardware Average, ERES, Mask Test.

Data analysis: Search, Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot, Power Analysis.

Unit Options

Unit Options below are multi-select — choose any combination that applies. Some options are software-licensed; others require additional hardware (e.g., logic probe). Contact your Test Architect to confirm bundle pricing.

• 16 digital channels — included standard (logic probe required, sold separately)
• External 50 MHz waveform generator support
• Power Analysis software option
• Bode Plot (frequency-response measurement)

Calibration Options

Standard calibration upgrade options for this Pre-Owned SDS3054X HD are:

• No Calibration Required
• NIST Traceable
• Z540.1 or ISO 17025 with Data
• Z540.3 Guardbanding with Data

This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.