Skip to content
In summary, the Preen PFV-33100 is part of the PFV Series, a four-quadrant regenerative AC power source delivering 30 kVA to 400 kVA in three-phase.
The Preen PFV Series is a four-quadrant regenerative AC power source delivering 30 kVA to 400 kVA in three-phase. PFV provides the same regenerative architecture as the PAS series — energy returned to the grid at over 90 % efficiency — without the LVRT/HVRT compliance package, making it ideal for grid-tied device testing where power-recycling is the priority.
The PFV-33100 is used across inverter manufacturing test, motor controller validation, regenerative cycling, and any high-power AC test workflow where energy recycling reduces operating cost. Specific test methodologies include grid-tied device input/output simulation, motor regenerative test, and battery management system AC interface validation.
The PFV-33100 integrates into bench, ATE, and high-power production environments through standard RS-232, RS-485, Ethernet, and USB control. Engineers use it to repeatably simulate global mains and DUT operating conditions during design verification, certification pre-compliance, and end-of-line testing — replacing manual variac/MG-set configurations and improving test repeatability and data capture.
From a measurement standpoint, the PFV Series is benchmarked against RoHS Compliant; CE Marked. Within this product line the PFV-33100 delivers the variant-specific output described in this model's specification block below — chosen to match the most common DUT power, voltage, and frequency requirements in the target application.
Preen (AC Power Corporation, founded 1989) is one of the world's highest-volume programmable power-source manufacturers, with ISO 9001:2015 certified manufacturing facilities in Taipei, Tianjin, and Suzhou, and a U.S. service center in Irvine, California. Preen products carry CE and RoHS certifications and have been recognized with multiple Taiwan Excellence Awards for the AFV, AFV-P, and ADG-P product lines — placing the brand in the established commercial tier alongside California Instruments, Chroma, and Pacific Power Source.
Specifications below are for the PFV Series. The PFV-33100 variant within this series is configured as: Regenerative AC Power Source (100kVA/300V/45-65Hz).
| Specification | Value |
|---|---|
| Phase | 3Ø / 4 Wire + G |
| Output Voltage | 0–150 / 0–300 V (L-N) user selectable |
| Frequency Range | 45–65 Hz standard; 40–70 Hz optional |
| Voltage Accuracy | 0.5 % F.S. + 4 counts |
| Frequency Accuracy | ± 0.02 % F.S. |
| THD | ≤ 2 % (resistive load) |
| Line / Load Regulation | ≤ 1 % / ≤ 1 % |
| Response Time | ≤ 2 ms |
| Efficiency | ≥ 92 % at max power |
| Regenerative Function | Four-quadrant |
| Voltage Ride-Through (VRT) | No (LVRT/HVRT not included — see PAS-F for VRT compliance package) |
| Three-Phase Independent Adjustment | Yes |
| Remote Interfaces | Standard: RS-485, RS-232 · Optional: GPIB, Ethernet, USB |
| Operating Temperature | 0 °C to 45 °C |
The PFV-33100 accepts the following factory-installed options. Multiple options may be selected.
(select all that apply — multi-select)
(single selection)
This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
PFV-33100
Condition
Used
Manufacturer
Preen
Frequency
65 Hz
Phase
3
Power (va)
100 kVA
Volts
300 V
Request A Quote