The Anritsu MS2028B VNA Master is a handheld, battery-operated two-port vector network analyzer covering 5 kHz to 20 GHz. It is part of a two-model series that also includes the MS2026B (5 kHz to 6 GHz), and is designed for precision S-parameter measurements of cables, antennas, filters, and other passive and active components in field environments. The instrument weighs less than 4.5 kg including battery and measures 315 x 211 x 78 mm.

The VNA Master is built for installation and maintenance personnel supporting aerospace, defense, and general-purpose RF and microwave systems — including naval radars, military vehicle antennas, flight-line test on aircraft, wireless communication systems, VHF Omni-directional Range (VOR) navigation, direction-finding reconnaissance, and short-range weather observatories. Typical applications include verifying antennas, phase matching cables and waveguides, locating problems using Distance-to-Fault, and characterizing isolators, circulators, filters, and duplexers for transmit and receive path signal separation.

ValueTronics stocks, tests, and ships the VNA Master series from our 20,000 sq ft secure warehouse at 1675 Cambridge Drive, Elgin, Illinois. Every unit is inspected and verified by our technicians before shipment, with calibration upgrade paths available on request. Unlike drop-shippers and pass-through brokers, we hold physical inventory and provide direct technical support from staff who work with this instrument category every day.

Brand Heritage

Anritsu Corporation is a Japanese precision measurement company with roots dating to 1895. Its current RF and microwave test capability was significantly shaped by the 1993 acquisition of Wiltron Company, which brought North American network analyzer and signal generator technology into the Anritsu portfolio. Instruments and product lines previously sold under the Wiltron name are now supported under the Anritsu brand.

Compare Other Models in This Series

The VNA Master series consists of two models that share the same handheld form factor, 12-term error correction architecture, three-receiver design, and software option set. The models differ only in upper frequency coverage, allowing users to select the instrument that matches their application's highest measurement frequency.

Both models support the same standard N-type test ports, identical sweep performance of 750 µsec/point, the same 8.4 inch TFT display, and the full set of optional capabilities including Time Domain Analysis, Vector Voltmeter mode, Bias Tee, and GPS. The K(f) precision connector option is unique to the MS2028B.

Each pre-owned model below is listed on its own dedicated product page with condition-matched pricing and availability. Use the comparison table to confirm the frequency coverage required for your application, then navigate to the specific model page for current inventory and full specifications.

The MS2028B extends frequency coverage to 20 GHz, making it suitable for K-band applications, broadband satellite and radar work, and any test environment where the highest measurement frequency exceeds 6 GHz. It is the only model in the series that supports the optional precision K(f) connector configuration for measurements to 20 GHz.

The primary distinction between the two models is upper frequency coverage: the MS2026B reaches 6 GHz and the MS2028B reaches 20 GHz. Both share the same 5 kHz low-frequency limit. For applications confined to general wireless (cellular, WiFi 2.4/5 GHz, broadcast through C-band), the MS2026B covers the requirement. For Ku-band, K-band, and broader microwave work, the MS2028B is required.

The MS2028B also supports the optional K(f) Test Port Connectors (Option 0011) for precision measurements to 20 GHz — this option is not available on the MS2026B. All other options (Time Domain, Power Monitor, Secure Data, Bias Tee, Vector Voltmeter, High Accuracy Power Meter, GPS Receiver, Balanced/Differential S-Parameters) are available on both models. Refer to the comparison table below for the complete specification breakdown.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• VNA Master User's Guide (10580-00220)
• Soft Carrying Case (65729)
• Master Software Tools CD ROM (2300-498)
• Rechargeable Battery, Li-Ion, 6.6 Ah (633-44)
• AC-DC Adapter (40-168-R)
• Automotive Cigarette Lighter 12 V DC adapter (806-141-R)
• USB A-to mini B cable, 3.05 m (10 ft.) (3-2000-1498)
• Ethernet cable, 2.13 m (7 ft.) (2000-1371-R)
• Ethernet Crossover Cable, 2.13 m (7 ft.) (3-806-152)
• USB Flash Drive (2000-1520-R)

Product Core & Specifications

About this used unit

• Warranty included
• Functional verification included
• Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
• Note that unnecessary accessories may not be included (contact Test Architect to confirm).

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.