ADG-PLUS-100-500 Preen DC Power Supply New

ADG-PLUS-100-500 — High Power Programmable DC Power Supply (50kW/100V/500A)

In summary, the Preen ADG-PLUS-100-500 is part of the ADG+ Series, a high-power-density programmable DC power supply delivering 30 kW to 1800 kW (via parallel) per system, with output voltage from 40 V to 1600 V and currents up to 2500 A.

The Preen ADG+ Series is a high-power-density programmable DC power supply delivering 30 kW to 1800 kW (via parallel) per system, with output voltage from 40 V to 1600 V and currents up to 2500 A. Built on DSP control, ADG+ delivers fast transient response (≤ 6 ms), low ripple (≤ 0.1 % F.S.), and CV/CC/CP operating modes for EV battery, photovoltaic, motor controller, and fuel-cell testing.

What is the ADG-PLUS-100-500 used for?

The ADG-PLUS-100-500 is used across EV motor controller test, DC/DC converter aging, server power supply burn-in, photovoltaic inverter Solar Array Simulation, battery emulation, and high-current fuse / breaker / contactor verification. Specific test methodologies include static and dynamic MPPT efficiency validation, EN 50530-compliant solar array simulation, battery pack discharge profile playback, and high-current DC pulse testing.

Where does the ADG-PLUS-100-500 fit in a typical lab workflow?

The ADG-PLUS-100-500 integrates into bench, ATE, and high-power production environments through standard RS-232, RS-485, Ethernet, and USB control. Engineers use it to repeatably simulate global mains and DUT operating conditions during design verification, certification pre-compliance, and end-of-line testing — replacing manual variac/MG-set configurations and improving test repeatability and data capture.

From a measurement standpoint, the ADG+ Series is benchmarked against EN 50530, SAS, Sandia test regulations; RoHS Compliant; CE Marked. Within this product line the ADG-PLUS-100-500 delivers the variant-specific output described in this model's specification block below — chosen to match the most common DUT power, voltage, and frequency requirements in the target application.

Preen (AC Power Corporation, founded 1989) is one of the world's highest-volume programmable power-source manufacturers, with ISO 9001:2015 certified manufacturing facilities in Taipei, Tianjin, and Suzhou, and a U.S. service center in Irvine, California. Preen products carry CE and RoHS certifications and have been recognized with multiple Taiwan Excellence Awards for the AFV, AFV-P, and ADG-P product lines — placing the brand in the established commercial tier alongside California Instruments, Chroma, and Pacific Power Source.

How does it compare to alternative AC/DC sources?

• Compared with California Instruments and Pacific Power Source: Preen typically offers 10–20% lower pricing with strong multi-phase capability — ideal for budget-conscious compliance labs and three-phase applications.
• Compared with Chroma 61800 series: Preen provides comparable programmability and broader high-power three-phase coverage at competitive ASP.
• For avionics 400 Hz testing, Preen frequency-converter options (AFC) and AFV+ Type-C 300–840 Hz cover MIL-STD-704 / DO-160 workflows.

Accessories Supplied

• Three-phase input power cabling
• Operation manual
• PC remote control software (download)
• Calibration certificate (when applicable)

Specifications

Specifications below are for the ADG+ Series. The ADG-PLUS-100-500 variant within this series is configured as: High Power Programmable DC Power Supply (50kW/100V/500A).

Unit Options

The ADG-PLUS-100-500 accepts the following factory-installed options. Multiple options may be selected.

Calibration Options

Factory calibration is provided with each new ADG-PLUS-100-500 per the manufacturer's datasheet. Additional ISO 17025-accredited or Z540.1 calibration upgrades are available on request — contact your Test Architect to scope.

This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.