Chat Live
Contact Us
sales@valuetronics.com
Request a Quote To Get An EDU Discount
Couldn't load pickup availability
In summary, the Rohde & Schwarz RTH1024 MSO is a 4-channel CAT IV 600 V / CAT III 1000 V rated handheld digital oscilloscope built on the R&S Scope Rider RTH platform. 4 analog + 8 digital logic channels, with 200 MHz analog bandwidth, 5 GSa/s peak real-time sampling, a 10-bit ADC (up to 16-bit with high-resolution decimation), and calculated rise time of < 1.75 ns. The R&S RTH-K15 history and segmented memory option ships with the base unit, and the platform is software-upgradeable to higher bandwidth tiers via keycode without returning the instrument. The MSO configuration adds 8 digital logic channels (RTH-B1), sampled at 1.25 GSa/s each, with threshold groups configurable across CMOS 5.0/3.3/2.5 V, TTL, ECL, PECL, and LVPECL standards — making the instrument a single-handed mixed-signal debug tool for embedded systems, industrial control, and automotive ECU work in the field.
The RTH1024 MSO is used for waveform debug and measurement on energized industrial and electrical equipment — motor drives, switching power supplies, photovoltaic inverters, distribution panels, automotive electronics, and field service of installed systems. Its fully isolated inputs and CAT IV 600 V / CAT III 1000 V rating allow direct connection to live AC mains and three-phase distribution circuits without an isolation transformer.
Oscilloscope bandwidth governs the highest signal frequency that can be measured with rated accuracy. The standard rule is to choose an instrument with 3 to 5 times the bandwidth of the highest signal frequency in the device under test. At 200 MHz, the RTH1024 MSO delivers a calculated rise time of < 1.75 ns, suitable for the digital edges, switching transients, and PWM waveforms encountered in modern industrial and power-electronics environments.
Quantitative anchors from the datasheet: peak real-time sampling of 5 GSa/s on a single active channel, DC gain accuracy ±1.5% of reading at input sensitivities above 5 mV/div, channel-to-channel isolation greater than 40 dB (measured) at matched input sensitivity, common-mode rejection greater than 100 dB at DC and AC ≤ 100 kHz (measured), timebase accuracy ±10 ppm, and waveform acquisition rate up to 50,000 waveforms/s. Input impedance is 1 MΩ ± 1% in parallel with 12 pF ± 2 pF (measured).
The RTH1024 MSO is built and certified to IEC/EN/DIN EN 61010-1, IEC/EN/DIN EN 61010-2-030, UL/CSA 61010-1, UL/CSA 61010-2-030. EMC compliance follows CISPR 11 / EN 55011 Group 1 Class A and IEC/EN 61326-1. Environmental qualification covers MIL-PRF-28800F class 3 shock and vibration and IP51 ingress protection per IEC 60529. The instrument carries VDE, CCSAUS, and KC certifications.
| Item | Description |
|---|---|
| Voltage probes | One 500 MHz, 10:1, 600 V CAT IV passive voltage probe per oscilloscope input channel |
| Logic probe set | RTH-B1 mixed-signal probe set, 8 logic channels (D0–D7) |
| microSD card | Installed in the instrument; user data and settings storage |
| Battery pack | Lithium-ion smart battery, 72 Wh, 11.25 V |
| Power supply | External adapter with plugs for EU, CH, UK, US, CAN, China, Australia |
| RTH-K15 option | History and segmented memory option installed with the base unit |
| Compact manual | Printed quick-start reference |
| Input channels | 4 analog + 8 digital logic channels; all inputs floating and fully isolated |
| Input impedance | 1 MΩ ± 1% || 12 pF ± 2 pF (meas.) |
| Analog bandwidth (−3 dB) | ≥ 200 MHz |
| Lower frequency limit (AC) | < 8 Hz (meas.) |
| Rise time (calculated) | < 1.75 ns |
| ADC resolution | 10 bit; up to 16 bit with high-resolution decimation |
| DC gain accuracy | ±1.5% of reading (>5 mV/div); ±2% (>2 mV/div to 5 mV/div); ±2.5% (2 mV/div) |
| Input sensitivity | 2 mV/div to 100 V/div in 1, 2, 4, 5 steps per decade |
| Max input voltage (BNC) | CAT IV 300 V (RMS), 424 V (peak); derates 20 dB/decade above 500 kHz |
| CMRR | > 100 dB at DC and AC ≤ 100 kHz (meas.) |
| Timebase range | 1 ns/div to 500 s/div |
| Timebase accuracy | ±10 ppm |
| Max real-time sampling | 5 GSa/s (1 active channel); 2.5 GSa/s (2 channels); 1.25 GSa/s (3 or 4 channels) |
| Max acquisition length | 500 ksample (1 ch, sample mode); 250 ksample (2 ch, sample mode); 125 ksample (3 or 4 ch, sample mode) |
| Acquisition modes | Sample, high resolution, peak detect, envelope, average (2 to 8192 waveforms) |
| Waveform acquisition rate | Max 50,000 waveforms/s |
| Trigger sources | CH1, CH2, CH3, CH4 + D0–D7 |
| Trigger modes | Auto, normal, single |
| Base trigger types | Edge, glitch, width, TV/video (PAL/NTSC/SECAM/PAL-M) |
| With RTH-K19 | Pattern, state, runt, slew rate, window, data2clock, serial pattern, timeout, interval, SDTV/HDTV |
| Hold-off | 8 ns to 10 s; 1 to 1,000,000,000 events |
| Logic channels | 8 (D0–D7) |
| Max input frequency | 250 MHz (meas.) |
| Sampling rate (logic) | 1.25 GSa/s per channel |
| Threshold range | ±8 V in 25 mV steps; presets CMOS 5.0/3.3/2.5 V, TTL, ECL, PECL, LVPECL |
| Threshold accuracy | ±(100 mV + 3% of setting) within ±4 V |
| Max input voltage (logic) | ±40 V (peak) |
| Input impedance (logic) | 100 kΩ ± 2% || ~4 pF at probe tip |
| Display | 7.0" LC TFT, 800 × 480 (WVGA) |
| Interfaces | USB host (Type A, 2.0); USB device (mini-B); LAN 10/100BASE-T (RJ-45); microSD slot |
| Battery / operating time | Lithium-ion smart battery, 72 Wh, 11.25 V; approx. 4 h operating; approx. 4 h charging (off) |
| Operating temperature | 0 °C to +50 °C (battery); 0 °C to +40 °C (adapter) |
| IP rating | IP51 per IEC 60529 |
| Shock / vibration | 40 g per MIL-STD-810E method 516.4; MIL-PRF-28800F class 3 |
| Dimensions (W × H × D) | 201 × 293 × 74 mm (7.91 × 11.54 × 2.91 in) |
| Weight (with battery) | 2.4 kg (5.3 lb) nom. |
| Calibration interval | 1 year |
Important note on probes. Maximum input voltage at the BNC inputs derates above 500 kHz per the published input rating curve. To preserve full CAT IV 600 V / CAT III 1000 V isolation to the probe tip, use R&S RT-ZI10 or RT-ZI11 isolated probes. Standard 600 V CAT IV passive probes ship with the base unit, and the RTH-B1 logic probe set is included in MSO configurations.
Note on calibration. Manufacturer-recommended calibration interval is 1 year. Optional accredited calibration coverage is available via R&S extended-warranty programs (CW1/CW2, AW1/AW2) — contact your Test Architect for details.
This webpage was written by a human with an A.I. "Intern", which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
RTH1024MSO
Condition
New
Manufacturer
Rohde & Schwarz
Channels
4
Frequency
200 MHz
Record length
500 ksample
Sampling rate
5 GSa/s
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
