1 1
Used
Compare

LM 18-10 Sorensen DC Power Supply Used

LM 18-10 Sorensen DC Power Supply Used

Shipping calculated at checkout.
check availability
Request a Quote
Login & Get 2% Back on Purchases
Login or Sign Up for Loyalty

Additional Features:

  • Output Voltage: 0-18 V
  • Output Current: 0-10 A
  • Output Power: 180 W
Share on
View full details
More Details
Specifications
Datasheets

Constant Voltage Mode

  • Ripple (Bandwidth 5 Hz to 1 MHz): <1.0 mV RMS
  • Line Regulation: <0.01% + 3 mV
  • Transient Response: <100 μs for 50% load change, 0.5A minimum load
  • Temperature Coefficient: <300 PPM/°C

Constant Current Mode

  • Ripple: <3 mA RMS
  • Line Regulation: <0.2% + 3 mA
  • Load Regulation: <0.2% + 3 mA

Input

  • Voltage and Frequency: 100V/120V/220V/240V, ±10% (externally switch-selectable), 50-60 Hz

General

  • Operating Temperature: 0°C to 40°C
  • Storage Temperature: -10°C to 70°C
  • Operating Humidity: <80% RH, non condensing
  • Storage Humidity: <70% RH
  • Isolation Voltage: ±300 VDC or peak AC, either output lead to chassis ground
  • Display Type: 3½ digit LED
  • Display Accuracy: ±0.5% of reading + 2 digits
  • Display Parameters: LM/LH models have separate displays for voltage and current; LS/LT models have a single display for voltage and current (switch-selectable) on each adjustable output; two display ranges for current on LS models
  • Indicators: LH/LM/LS models: CV and CC LEDs; LT models: CV, CC, parallel mode and overload (5V output) LEDs
  • Output Termination: Front panel binding posts, rated <10A; LH 8-30 and LH 18-20 provide an additional rear panel terminal block
  • Regulatory Compliance: CE Mark

The L Series is a family of linear DC power supplies designed for benchtop and portable applications.

The family comprises fourteen models; outputs range from 0-8V to 0-300V at power levels from 90W to 375W. The supplies may be used as either voltage sources or current sources. Features such as isolated outputs, series/parallel operation, and tracking operation provide the flexibility for a variety of applications.

Constant Voltage/Constant Current Operation

The power supplies may be operated as either precisely regulated voltage sources or current sources. Crossover between modes is automatic, dependent only on load demand. Front panel LEDs indicate operating mode.

Series/Parallel Operation

Multiple power supplies may be connected in series to extend the output voltage range. The LS and LT Series have the capability to operate outputs in parallel for increased current range.

3½ Digit LED

LED displays are provided for each adjustable output. The LM and LH Series have two separate displays, one each for voltage and current.

Universal AC Input

The AC input is externally switch-selectable for 100V/120V/220V/ 240V at 50/60 Hz.

Model No

LM

Condition

Used

Manufacturer

Sorensen

Current

10 A

Voltage

18 V

Power

180 W

Sorensen Elgar L Series
Compare All Models
Product collection banner Product collection mobile banner