Chat Live
Contact Us
sales@valuetronics.com
The Keysight E5063A is a two-port RF network analyzer in the ENA Series, covering a frequency range from 100 kHz up to a maximum of 18 GHz depending on the installed frequency option. It is built around a 10.4-inch touchscreen front panel with Type-N female 50 Ω test ports, and it characterizes a device under test through both corrected and uncorrected system performance — directivity, source match, load match, reflection tracking, and transmission tracking — across its sweep range.
A network analyzer measures how a device under test reflects and transmits RF energy, expressed as S-parameters. The E5063A performs full 2-port calibrated measurements of reflection (S11) and transmission (S21), reporting magnitude and phase, and it also computes group delay from the measured phase change across a specified aperture. These are the core measurements engineers rely on to characterize RF components and networks.
ValueTronics stocks the equipment it sells from its own 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is fulfilled directly from our inventory; pre-owned units are inspected and functionally verified in-house before they ship, while new units ship factory-sealed exactly as received from the manufacturer.
The test and measurement business that issued this product traces its corporate lineage through Hewlett-Packard, whose test and measurement division was spun out as Agilent Technologies in 1999. That measurement business was subsequently separated to form Keysight Technologies in 2014.
| Specification | Value |
|---|---|
| System Dynamic Range at Test Port (IF Bandwidth = 3 kHz, Specification) | |
| 100 kHz to 300 kHz | 63 dB |
| 300 kHz to 8.5 MHz | 68 dB |
| 8.5 to 100 MHz | 91 dB |
| 100 MHz to 4.34 GHz | 92 dB |
| 4.34 to 8.5 GHz | 81 dB |
| 8.5 to 13 GHz | 75 dB |
| 13 to 16 GHz | 65 dB |
| 16 to 18 GHz | 62 dB |
| System Dynamic Range at Test Port (IF Bandwidth = 10 Hz, Specification) | |
| 50 kHz to 100 kHz | 88 dB |
| 100 kHz to 300 kHz | 88 dB |
| 300 kHz to 8.5 MHz | 93 dB |
| 8.5 to 100 MHz | 116 dB |
| 100 MHz to 4.34 GHz | 117 dB |
| 4.34 to 8.5 GHz | 106 dB |
| 8.5 to 13 GHz | 100 dB |
| 13 to 16 GHz | 90 dB |
| 16 to 18 GHz | 87 dB |
| Uncorrected System Performance (Specification, dB) | |
| Directivity (100 kHz–300 kHz / 300 kHz–1 MHz / 1–100 MHz / 100 MHz–3 GHz / 3–6 GHz / 6–10 GHz / 10–13 GHz / 13–18 GHz) | 10 / 10 / 25 / 25 / 20 / 15 / 10 / 10 dB |
| Source match | 20 / 20 / 25 / 25 / 20 / 15 / 15 / 15 dB |
| Load match | 7 (typ.) / 11 (typ.) / 14 / 11 / 10 / 7 / 8 (typ.) / 6 (typ.) dB |
| Reflection tracking | ± 3.0 / ± 3.0 / ± 1.0 / ± 1.0 / ± 1.0 / ± 1.0 / ± 1.0 / ± 1.0 dB |
| Transmission tracking | ± 3.0 / ± 3.0 / ± 1.0 / ± 1.0 / ± 1.0 / ± 1.0 / ± 1.0 / ± 1.0 dB |
| Corrected System Performance — 85032F Calibration Kit (Type-N, 50 Ω, Full 2-port, IFBW=10 Hz; Specification, dB) | |
| Directivity (100 kHz–10 MHz / 10 MHz–3 GHz / 3–9 GHz) | 49 / 46 / 38 |
| Source match | 41 / 40 / 35 |
| Load match | 47 / 46 / 36 |
| Reflection tracking | ± 0.011 / ± 0.021 / ± 0.054 |
| Transmission tracking | ± 0.082 / ± 0.037 / ± 0.128 |
| Corrected System Performance — 85092C ECal Module (Type-N, 50 Ω, Full 2-port, IFBW=10 Hz; Specification, dB) | |
| Directivity (300 kHz–10 MHz / 10 MHz–3 GHz / 3–9 GHz) | 45 / 52 / 45 |
| Source match | 36 / 44 / 36 |
| Load match | 36 / 45 / 38 |
| Reflection tracking | ± 0.10 / ± 0.04 / ± 0.07 |
| Transmission tracking | ± 0.153 / ± 0.052 / ± 0.17 |
| Corrected System Performance — 85033E Calibration Kit (3.5 mm, 50 Ω, Full 2-port, IFBW=10 Hz; Specification, dB) | |
| Directivity (100 kHz–10 MHz / 10 MHz–3 GHz / 3–9 GHz) | 46 / 44 / 38 |
| Source match | 43 / 40 / 36 |
| Load match | 45 / 44 / 38 |
| Reflection tracking | ± 0.006 / ± 0.007 / ± 0.010 |
| Transmission tracking | ± 0.077 / ± 0.040 / ± 0.112 |
| Corrected System Performance — 85093C ECal Module (3.5 mm, 50 Ω, Full 2-port, IFBW=10 Hz; Specification, dB) | |
| Directivity (300 kHz–10 MHz / 10 MHz–3 GHz / 3–9 GHz) | 45 / 52 / 47 |
| Source match | 36 / 44 / 34 |
| Load match | 36 / 45 / 39 |
| Reflection tracking | ± 0.100 / ± 0.040 / ± 0.070 |
| Transmission tracking | ± 0.156 / ± 0.047 / ± 0.155 |
| Corrected System Performance — 85052D Calibration Kit (3.5 mm, 50 Ω, Full 2-port, IFBW=10 Hz; Specification, dB) | |
| Directivity (100 kHz–10 MHz / 10 MHz–3 GHz / 3–10 GHz / 10–18 GHz) | 42 / 38 / 36 / 36 |
| Source match | 37 / 31 / 28 / 28 |
| Load match | 42 / 38 / 36 / 36 |
| Reflection tracking | ± 0.003 / ± 0.004 / ± 0.008 / ± 0.008 |
| Transmission tracking | ± 0.136 / ± 0.100 / ± 0.208 / ± 0.328 |
| Corrected System Performance — N4691B ECal Module (3.5 mm, 50 Ω, Full 2-port, IFBW=10 Hz; Specification, dB) | |
| Directivity (300 kHz–10 MHz / 10 MHz–3 GHz / 3–10 GHz / 10–18 GHz) | 31 / 46 / 48 / 46 |
| Source match | 29 / 41 / 45 / 42 |
| Load match | 27 / 42 / 42 / 39 |
| Reflection tracking | ± 0.110 / ± 0.050 / ± 0.030 / ± 0.040 |
| Transmission tracking | ± 0.358 / ± 0.046 / ± 0.062 / ± 0.107 |
| Test Port Output — Frequency Range (by option) | |
| Option 205 | 100 kHz to 500 MHz |
| Option 215 | 100 kHz to 1.5 GHz |
| Option 235 | 100 kHz to 3 GHz |
| Option 245 | 100 kHz to 4.5 GHz |
| Option 265 | 100 kHz to 6.5 GHz |
| Option 285 | 100 kHz to 8.5 GHz |
| Option 2D5 | 100 kHz to 14 GHz |
| Option 2H5 | 100 kHz to 18 GHz |
| Resolution | 1 Hz (100 kHz to 6.5 GHz); 2 Hz (6.5 to 13 GHz); 11 Hz (13 to 18 GHz) |
| Source stability | ± 7 ppm (5 to 40 ºC) |
| CW accuracy | ± 7 ppm |
| Test Port Output Power | |
| Nominal power (preset power) | –5 dBm |
| Range, 50 kHz to 100 kHz | –20 to –5 dBm |
| Range, 100 kHz to 300 kHz | –20 to 0 dBm |
| Range, 300 kHz to 8.5 GHz | –15 to –5 dBm |
| Range, 8.5 to 18 GHz | –20 to –5 dBm |
| Resolution | 0.05 dB |
| Level Accuracy (level flatness; absolute taken at 50 MHz, –5 dBm) | |
| At 50 MHz, –5 dBm, absolute | ± 0.9 dB |
| 50 kHz to 300 kHz | ± 3.7 dB |
| 300 kHz to 1 MHz | ± 2.0 dB |
| 1 MHz to 4.34 GHz | ± 1.0 dB |
| 4.34 to 8.5 GHz | ± 1.6 dB |
| 8.5 to 12 GHz | ± 3.6 dB |
| 12 to 18 GHz | ± 5.8 dB |
| Level Linearity (relative to –5 dBm) | |
| –10 to –5 dBm, 50 kHz to 300 kHz | ± 1.6 dB |
| –10 to 0 dBm, 300 kHz to 8.5 GHz | ± 1.6 dB |
| –10 to –5 dBm, 8.5 to 18 GHz | ± 1.8 dB |
| –20 to –10 dBm, 50 kHz to 8.5 GHz | ± 2.7 dB |
| –15 to –10 dBm, 8.5 to 18 GHz | ± 2.9 dB |
| Test Port Input Level | |
| Maximum input level | +6 dBm |
| Damage level | +26 dBm or ± 35 VDC |
| Crosstalk | |
| 50 kHz to 100 kHz | –88 dB |
Important: Test port maximum input level: +6 dBm. Damage level: +26 dBm or ±35 VDC.
Important: Line power: a third-wire ground is required.
Important: Specified corrected system performance depends on the calibration kit or ECal module used; the datasheet lists technical specifications for the 85032F, 85033E, 85052D calibration kits and the 85092C, 85093C, N4691B ECal modules. For models not listed, download the free uncertainty calculator from www.keysight.com/find/na_calculator.
Recommended pairing: calibrate with the Keysight 85032F (Type-N), 85033E or 85052D (3.5 mm) mechanical kits, or the 85092C, 85093C, or N4691B ECal modules specified for this analyzer.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Keysight
Condition
Pre-Owned
Manufacturer
Keysight
Net_ana_freq
100 kHz to 18 GHz
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
