Chat Live
Contact Us
sales@valuetronics.com
The Agilent E1852A Bluetooth Test Set is a low-cost, stand-alone solution designed to prove the performance of Bluetooth devices. It establishes a link using standard Bluetooth protocol and acts as a Bluetooth Master to create a PAGED connection per Bluetooth Specification 1.1. The instrument is qualified by the Bluetooth SIG as a Bluetooth development tool and is intended to maximize throughput in manufacturing environments through a PC-based user interface.
The test set supports both Test Mode operation, with or without frequency hopping, and Normal Mode operation for verifying Bluetooth device behavior. In Test Mode, the device under test can operate in Transmitter mode or Loopback mode. The instrument also includes a dedicated RF-Analyzer mode for transmitter measurements when no link is established, and an RF-Generator mode that produces burst or continuous signals on any channel with selectable power output and frequency offset.
ValueTronics International has supplied verified test and measurement equipment from our 20,000 sq ft secure warehouse at 1675 Cambridge Drive, Elgin, Illinois since 1992. Every pre-owned instrument in our catalog is inspected and tested in-house by our technicians before it ships — not drop-shipped or passed through from an unverified source. That distinction matters when a customer needs a Bluetooth test set that performs to its published specifications on day one of integration into a production line or development bench.
Hewlett-Packard's test and measurement business was spun out as Agilent Technologies in 1999, and Agilent's electronic measurement division became Keysight Technologies in 2014. Instruments originally manufactured under the Agilent brand, such as the E1852A, trace their support and engineering lineage to Keysight today.
| Specification | Value |
|---|---|
| RF-Generator — Frequency | |
| Range | 2402 MHz - 2480 MHz, 79 channels at 1 MHz spacing |
| Modulation | In accordance with Bluetooth Radio Specification Version 1.1 |
| Offset | ±300 kHz in 100 kHz increments |
| RF-Generator — Output Power | |
| Range | -95 dBm to -35 dBm |
| Resolution | 0.1 dB |
| Level Accuracy at -70 dBm | ±0.9 dB at 25 °C ±3 °C (±1.4 dB over full operating temperature) |
| Level Accuracy at 2442 MHz over the output range -85 to -35 dBm | ±1.4 dB at 25 °C ±3 °C (±1.9 dB over full operating temperature) |
| RF-Analyzer — Frequency | |
| Range | 2402 MHz - 2480 MHz, 79 channels at 1 MHz spacing |
| Demodulation | ±400 kHz maximum |
| Error | ±(Timebase error + 5 kHz) (nominal) |
| RF-Analyzer — Power Measurement | |
| Range | -55 dBm to +23 dBm |
| Resolution | 0.1 dB |
| Accuracy at 0 dBm | ±0.7 dB at 25 °C ±3 °C (±1.3 dB over full operating temperature) |
| Accuracy at 2442 MHz over the input range -30 to +22 dBm | ±0.9 dB at 25 °C ±3 °C (±1.3 dB over full operating temperature) |
| Frequency Counter Input | |
| Range | 10 kHz to 15 MHz |
| Frequency Error | ±(Timebase error + 5 kHz) (nominal) |
| Resolution | 1 Hz |
| Sensitivity | 0.5 V RMS (nominal) |
| Frequency Reference — Internal Timebase | |
| Drift due to temperature | ±2.0 ppm |
| Aging | ±1.0 ppm / year |
| Frequency Reference Input | |
| Frequency | 10 MHz (nominal) |
| Sensitivity | 150 mV into 50 Ω (nominal) |
| Input/Output Connectors | |
| RF In/Out | N(f), 50 Ω (nominal) |
| Counter In | BNC(f), high impedance |
| Parallel Port | 25-pin D-sub(m) |
| Serial Port [RS-232] | 9-pin D-sub(f) used for firmware downloads |
| Frequency Reference Input | BNC(f), 50 Ω nominal |
| Analog Outputs | BNC(f), 50 Ω nominal — Bluetooth Slot Clock (625 µs interval), Received Data, Receive Slot Sync, Power Envelope |
| Environmental Conditions | |
| Operating Temperature | +15 °C to +45 °C |
| Operating Humidity | Up to 95% relative humidity to 40 °C (non-condensing) |
| Power Consumption | |
| Supply Voltage | 100-120 VAC, 200-240 VAC 50-60 Hz, 30 VA maximum |
| Mechanical | |
| Dimensions | 92 mm (H) x 280 mm (D) x 484 mm (W); designed for rack-mounting |
| Weight | 3.5 kg |
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Agilent
Condition
Used
Manufacturer
Agilent
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
