Skip to content
Applications:
The AL-RE101 Loop Antenna is specifically designed for tests according to MIL-STD-461, RE101, radiated emissions, magnetic ield. During this test, radiated emissions from the Equipment Under Test (EUT) are measured from equipment and subsystem enclosures, including electrical cable interfaces, to verify that the magnetic field emissions from the EUT and its associated electrical interfaces do not exceed the specified requirements.
The AL-RE101 is a receiving loop antenna used for Mil- Std 461, RE101 testing to measure the magnetic field intensity generated by the Equipment Under Test (EUT). Its construction consists of a 13.3 cm diameter, 36-turn, electrostatically shielded coil of 7-strand, 41 gauge Litz wire. The base of the antenna is constructed from durable nylon, which is mounted over a plexi-glass plate. For convenience, the plate protrudes outward from the front of the antenna to provide the required 7 cm spacing between the center of the loop and the EUT, as shown in the diagram to the left.
Model No
AL-RE101
Condition
New
Manufacturer
Com-Power
Frequency
300 kHz