Skip to content
Stand-alone or Computer-controlled
The 2574R can be used in stand-alone or computer-controlled environments. It allows the user to simultaneously measure all pins on all tubes, independent output measurements, 12 voltages and 12 currents, (i.e. independent tube V and I measurement, independent filament V and I, for each tube that is configured). A continuous sampling at up to 2 Msps ensures that even the shortest transient events are measured.
Model No
2574R
Condition
New
Manufacturer
Xitron
["1MEG-INPUT
Option 1 MEG input impedance upgrade
per channel cost (requires a calibration cost as well if not performed as part of a repair) (1
2
3 & 4 Channel)
2X
Extra High Current Load Capability (12Apk per pin) (1
2
3 & 4 Channel)
CBL0067
2 Pin
Molex to Flying Leads
7" each
F
Decrease to 2MHz –3dB bandwidth
reduced accuracy above 100kHz
HC
3Apk
2Arms per pin. (HID becomes 6Apk combined)
HI
4.5kVpk (removes spark gaps)
HID
Option HID (1
2
3 & 4 Channel)
HL
Increases line current to 40Apk
LC
0.75Apk per pin
M
Increased Voltage Accuracy to 1.5kVpk limit
better accuracy
PCA0088
2574R Rear Panel PCA
XC
6Apk per pin"]