1 1
Used
Compare
lab tested

DL1740 Yokogawa Digital Oscilloscope Used

DL1740 Yokogawa Digital Oscilloscope Used

Shipping calculated at checkout.
Calibrations
check availability
Request a Quote
Login & Get 2% Back on Purchases
Login or Sign Up for Loyalty

Features:

  • 500 MHz
  • 4 Channel
  • 1 GS/s
  • 1 MPts
  • 6.4-inch wide-angle-view TFT color LCD 
  • Compact and lightweight (approx. 5.5 kg)
  • A4-size footprint 
  • Newly developed DSE chip for high-speed screen updating
  • Built-in Zip® drive or FDD 
  • USB-compliant 
  • Search functions (History Search & Zoom) 
  • Easy to use
Share on
View full details
More Details
Specifications
Options
Datasheets

Specifications:

  • Input coupling: AC-1 MΩ, DC-1 MΩ, DC-50 Ω, GND
  • Input impedance: 1 MΩ ±1.0%, 50 Ω ±1.0%
  • Voltage-axis sensitivity range: 50-Ω input: 2 mV—1 V/div (in 1, 2 or 5 mV increments)
  • Maximum input voltage: 1-MΩ input (at 1 kHz or less frequencies): 400 V (DC + AC peak)—282 Vrms CAT II
  • Frequency characteristics 1 (-3 dB roll-off point for sine-wave input with ±4 div amplitude): 50-Ω input: 1 V—10 mV/div over 0 (DC) to 500 MHz, or 5 mV—2 mV/div over 0 (DC) to 400 MHz
  • A/D conversion resolution: 8 bits (24 LSBs/div)
  • Maximum sampling rate: Real-time sampling mode when interleave mode is on: 1 GS/s 2, when interleave mode is off: 500 MS/s
  • Maximum record length: When interleave mode is on: 1 MW 2
  • DC-mode accuracy 1: ± (1.5% of 8 divisions + voltage-axis offset accuracy)
  • Voltage-axis offset accuracy*1: 2 mV—50 mV/div: ± (1% of setpoint + 0.2 mV)
  • Sweep time: 1 ns—50 s/div (for 10-KW or longer record length)
  • Timebase accuracy 1: ±0.005%
  • External clock input: Within the 40 Hz—20 MHz input frequency range (for continuous clock signals only)

The Yokogawa DL1740 is a digital oscilloscope. Even a measuring instrument with higher sampling performance may fail to precisely capture waveforms, depending on the time interval of observation. This failure results from a decrease in the effective sampling rate due to shorter record lengths of memory. Large recording memory not only helps extend the observation time interval but prevents the sampling rate from degrading. This allows correct waveform observation. Using the zoom functions along with the large recording memory enables you to scrutinize part of a waveform you’ve caught into the memory. You can set two zoom-in areas at the same time.

Model No

DL1740

Condition

Used

Manufacturer

Yokogawa

Channels

4

Frequency

500 MHz

Record length

1 MPts

Sampling rate

1 GS/s

B5

Built-in printer

C10

Ethernet interface

J1

Floppy drive

Yokogawa_DL1740
Compare All Models
Product collection banner Product collection mobile banner