MXO58 Rohde & Schwarz Mixed Signal Oscilloscope

Digital Oscilloscope (8 Channel / 100 MHz)

The R&S MXO 5 Series oscilloscopes have cutting-edge technology for swift and precise results. Equipped with advanced custom technological and revolutionary features, these oscilloscopes are indispensable for insight into circuit behavior.

12-bit ADC with 18-bit architecture for HD mode

The R&S MXO 5 Series oscilloscopes incorporate a 12-bit A/D converter on all input channels. The 4096 quantization levels deliver precise vertical resolution at all sampling rates for uncompromising capture of signal details. The 18-bit architecture with HD mode also enhances the ADC resolution. The R&S MXO 5 Series has up to eight channels with 12-bit precision and an uncompromised sampling rate.

Quickly and reliably detect sporadic signal faults

The high acquisition rate greatly improves the probability of finding rare and sporadic events that other oscilloscopes cannot. The R&S MXO 5 can confidently capture all events even when the triggers are seemingly too close.

With over 4.5 million waveforms/s, the R&S MXO 5 Series oscilloscope has the lowest blind time thanks to a trigger rearm of just 21 ns.

Low noise with vertical sensitivity down to 500 µV/div

The R&S MXO 5 Series oscilloscope has outstanding sensitivity down to 500 µV/div without any unexpected reductions in bandwidth. The offset of ±2 V on 50 ? coupling and ±5 V on 1 M? coupling lets users easily place the signal at the center of the screen to examine DC noise and ripple. The oscilloscope must have low noise levels to accurately quantify small signals.

World’s most sensitive and hysteresis-adjustable trigger

The R&S MXO 5 Series digital trigger is up to 10000 times more sensitive than competing trigger systems. Triggering sensitivity lets users isolate difficult-to-find, small physical layer anomalies in the presence of large signals, speeding up debugging and troubleshooting. Users have full control of the trigger hysteresis settings for added flexibility with desired trigger noise suppression.

Pristine RF measurements, now with more capabilities

Improve overall RF insights with up to four highly capable, simultaneous spectrum displays. The powerful MXO-EP ASIC architecture and additional processing capabilities give the oscilloscopes ultrafast 45000 FFT/s on up to four simultaneous spectrum displays.

The superior RF performance outshines all oscilloscopes in its class. The deep record length and spectral control independent of the time domain waveforms make RF analysis a breeze. The wide frequency range and low noise density generate a truly usable spectral trace for RF insight.

As with a spectrum analyzer, spectral traces are easy to configure along with navigation to presentations of various spectral results such as max. and min. hold, or even an average trace to clean up noise. The R&S MXO 5 also has log-log scale presentations to help observe EMI-related spectral events in wide frequency ranges.

?Logic analysis (via option MXO5-B1)

Every R&S MXO 5 Series oscilloscope comes equipped with MSO logic analysis capability. Just add MSO probes to get 16 digital channels.

The MXO5-B1 mixed signal option contains two R&S RT-ZL04 logic probes.

Trigger and decode packages:

• Option MXO5-K510: I2C/SPI/RS-232/RS-422/RS-485/UART
• Option MXO5-K520: CAN/CAN FD/CAN XL/LIN

Integrated two-channel waveform generator (option MXO5-B6)

Get fully the integrated two-channel 100 MHz arbitrary waveform generator with the R&S MXO5-B6 option. This compact and configurable solution offers exceptional versatility for various applications, from hardware prototyping to classroom usage. With a sampling rate of 625 Msample/s and 16-bit resolution, the generator delivers reliable performance and precise control as a function or modulation generator.

Stimulate your device under test with a diverse range of waveforms. Choose from sine, square/pulse, ramp, triangle, sine cardinal (sinc), arbitrary and noise waveforms. Easily customize the frequency, amplitude, offset, and noise parameters for each waveform, tailoring the stimulus to your specific needs. Get integrated arbitrary waveform generation capabilities. Take advantage of the modulation feature to explore advanced signal variations.

Frequency response analysis with bode plot (option MXO5-K36)

Quickly perform low-frequency response analysis with the R&S MXO5-K36 frequency response analysis (FRA) option. Easily characterize the frequency response of various electronic devices, including passive filters and amplifier circuits. Precisely measure the control loop response (CLR) and power supply rejection ratio (PSRR) in switch mode power supplies.

The FRA option leverages the oscilloscope's built-in waveform generator to create stimulus signals from 10 mHz to 100 MHz. By measuring the stimulus signal to output signal ratio for the device under test at each test frequency, the oscilloscope accurately plots logarithmic gain and phase for valuable insights into your device's behavior.

Note: option MXO5-B6 is a prerequisite for FRA applications. (sold separately)

Power analysis (option MXO5-K31)

Measuring AC circuit power quality can be tedious due to the numerous calculations required to determine the real, apparent, and reactive power. An oscilloscope is ideal for this work because it provides a clear view of the waveform characteristics between voltage and current, allowing engineers to quickly identify and resolve problems. Option MXO5-K31 enables power quality measurements and provides concurrent analysis of three pairs of voltage and current sources.

Different standards for limiting the harmonic current must be met in AC power supplies. Identifying distortion from harmonic content is tedious without a proper tool. The R&S®MXO5-K31 includes current harmonic analysis to help test in line with all common standards. Users can set up three concurrent harmonic measurements.

Application bundle

Rohde & Schwarz also offer an application bundle option - part number MXO5-PK1. This includes the following:

• MXO5-K510 - low-speed serial triggering/decode
• MXO5-K520 - automotive serial triggering/decode
• MXO5-K31 - power analysis
• MXO5-K36 - frequency response analysis
• MXO5-B6 - arbitrary waveform generator