DSOX3102A Keysight Digital Oscilloscope New

Digital Oscilloscope (1 GHz / 2 Channels)

The Keysight InfiniiVision 3000A X series oscilloscope is available in a variety of formats - 2 or 4 analog channels, with or without MSO functionality, and in bandwidths from 100 MHz to 1 GHz. The chart below provides an overview of the main features of each.

Fast update rate

If you can’t see the problem, it is hard to troubleshoot it. With Keysight’s MegaZoom IV smart memory technology, the 3000 X-Series updates waveforms up to 1 million times per second, which gives you the highest probability of capturing random and infrequent events that you would miss on an oscilloscope with a lower waveform update rate.

Deeper memory for longer time capture

With up to 4 Mpts of MegaZoom IV deep memory, you can capture long, non-repeating signals while maintaining a high sample rate, then quickly zoom in on areas of interest.

The InfiniiVision 3000 X-Series optimizes your deep-memory oscilloscope measurements by using MegaZoom IV technology to make the most effective trade-offs in sample rate, memory depth and waveform update rate automatically. Although many people think deeper memory is always better, usually deep memory means making tradeoffs.

Oscilloscopes with deep memory require additional waveform processing time to acquire deep memory waveforms, which means waveform update rates will be reduced significantly. For this reason, most other oscilloscopes have manual memory-depth selections, and the typical default memory depth setting is usually relatively shallow (10 to 100 kpts). If you want to use deep memory in these other oscilloscopes, you must manually turn it on and deal with the update rate tradeoff.

WaveGen built-in 20 MHz function/arbitrary waveform generator (option)

The InfiniiVision 3000A X series offers an integrated built-in 20 MHz function/arbitrary waveform generator, available with modulation support (option DSOX3WAVEGEN).

The integrated function generator provides stimulus output of sine, square, ramp, pulse, DC, Sinc (x), exponential rise/fall, cardiac, Gaussian Pulse and noise waveforms to your device under test. The modulation feature supports AM, FM, and FSK modulations with modulation shapes of sine, square, and ramp. With AWG functionality, you can store the waveforms from analog channels or reference memory to the arbitrary memory and output from WaveGen. Easily create/edit the waveform using the built-in editor or by using Keysight’s Benchlink Waveform Builder Basic.

Integrated digital voltmeter and frequency counter

The 3000A X series offers an integrated 3-digit voltmeter (DVM) and 5-digit frequency counter inside the oscilloscope. The voltmeter operates through the same probes as the oscilloscope channels, however, the measurements are decoupled from the oscilloscope triggering system so that both the DVM and triggered oscilloscope measurements can be made with the same connection. The voltmeter results are always displayed, keeping these quick characterization measurements at your fingertips.

Segmented memory

When capturing low-duty cycle pulses or data bursts, you can use segmented memory acquisition to optimize acquisition memory. Segmented memory acquisition not only lets you selectively capture and store important segments of signals without capturing unimportant signal idle/deadtime, but it also allows you to run post-capture inter-segment analysis such as segment playback, waveform measurements, and waveform overlay. Segmented memory acquisition is ideal for applications including packetized serial buses, pulsed laser, radar bursts and high-energy physics experiments. Up to 1000 segments can be captured on the 3000 X-Series models with a minimum re-arm time under 1 μs. Segmented memory works simultaneously with serial bus decodes as well.

What's included:

• 3-year warranty (90 days for unserialized accessories such as passive probes)
• Certificate of calibration, 2-year calibration interval
• Secure erase
• One N2890A passive probe 500 MHz, 10:1 attenuation 1 per channel
• Interface and built-in help language support for English, Japanese, simplified Chinese, traditional Chinese, Korean, German, French, Spanish, Russian, Portuguese, Italian, Thai, and Polish
• Localized power cord