The Keysight E3620A and E3630A are non-programmable, multiple-output linear DC power supplies built for the bench. They deliver the performance of system power supplies at a modest price, providing clean power with excellent regulation and fast transient response. By packing multiple supplies into one compact unit, they conserve bench space while supplying well-regulated DC to the circuits under test.

These benchtop supplies are intended to satisfy most bench requirements, supplying clean, well-regulated DC for precision circuitry. The E3630A's auto-tracking feature makes it straightforward to adjust the supply for circuits requiring balanced voltages, letting a single control set the +20 V and –20 V outputs together. Both models protect the device under test against overload and short-circuit damage. A DC power supply provides controlled, adjustable voltage and current to power and characterize electronic circuits during design and test.

ValueTronics stocks and holds its own inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.

Brand Heritage

Keysight Technologies traces its roots to Hewlett-Packard, founded in 1939. Hewlett-Packard's test and measurement business was spun off as Agilent Technologies in 1999, and that measurement business was established as Keysight Technologies in 2014.

Compare Other Models in This Series

The E3620A and E3630A are the multiple-output, non-programmable members of the E3600 Series, delivering the performance of system power supplies in a low-cost benchtop form. Both pack multiple isolated outputs into a single compact unit and share the same core regulation, noise, and protection characteristics.

The two models differ primarily in how many outputs they provide and how those outputs are configured — a dual-output design versus a triple-output design with an auto-tracking feature for balanced supply rails.

Each model below links to its own dedicated product page with condition-matched pricing for the pre-owned unit you select. Review the comparison table to confirm the output configuration that fits your bench before choosing a model.

The 50-watt E3620A offers two completely independent and isolated 0 V to 25 Vdc outputs, each rated to a maximum of 1 A, with 10-turn CV/CL control on each output. It is the model that supports the side-by-side rackmount kits and the 1CM/34190A rackmount option.

The 35-watt E3630A offers three outputs — a 0 to 6 V output rated up to 2.5 A and 0 to +20 V and 0 to –20 V outputs each rated 0.5 A — and adds an auto-tracking feature that adjusts the +20 V and –20 V outputs together, tracking to within 1 percent. See the comparison table for the per-model output ratings, meter resolution, and dimensions.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• Product reference CD
• Power cord

Product Core & Specifications

Important: Output current is derated 50% between 40 ºC and 55 ºC. Isolation: ±240 Vdc.

Important: Test leads are not included with the base unit; standard shipped accessories are only a product reference CD and power cord. The E3600A-100 Test lead kit is available separately (see options).

Important: Rackmounting with the 1CM or lock-link/flange kit requires Keysight or customer support rails (Keysight Support Rails-E3663AC).

Usage tip: add the E3600A-100 test lead kit for bench connections to the device under test.

About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

• Warranty included
• Functional verification included
• Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
• Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.