Chat Live
Contact Us
sales@valuetronics.com
The Anritsu MS2723B is part of the Spectrum Master line of high performance handheld spectrum analyzers, covering 9 kHz to 13 GHz (usable to 0 Hz). Built for the wireless professional, it is designed to deliver the performance needed for demanding measurements in harsh RF and physical environments, packaged in a 3.4 kg (7.5 lb) instrument with an 8.4-inch 800 x 600 display.
Anritsu positions the Spectrum Master for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, and Wi-Fi and wireless network measurements. Across these tasks it is intended to make fast and reliable measurements in the field.
ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit we sell is inspected and functionally verified in-house against its original specifications before it ships, while new units leave factory-sealed exactly as received. That combination of held stock and in-house verification lets buyers source the right instrument with confidence in its condition.
| Specification | Value |
|---|---|
| Frequency | |
| Frequency Range | 9 kHz to 13 GHz (usable to 0 Hz), Preamp 100 kHz to 4 GHz |
| Tuning Resolution | 1 Hz |
| Frequency Reference Aging | ± 1.0 ppm/10 years |
| Frequency Reference Accuracy | ± 0.3 ppm (25 °C ±25 °C) + aging |
| Frequency Span | 10 Hz to 13 GHz including zero span |
| Span Accuracy | Same as frequency reference accuracy |
| Sweep Time | 10 µs to 600 seconds in zero span, autoset in non-zero span |
| Sweep Time Accuracy | ± 2% in zero span |
| Bandwidth | |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth) |
| Video Bandwidth (VBW) | 1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) |
| RBW with Quasi-Peak Detection | 200 Hz, 9 kHz, 120 kHz (-6 dB bandwidth) |
| VBW with Quasi-Peak Detection | Auto VBW is On, RBW/VBW = 1 |
| Spectral Purity — SSB Phase Noise | |
| @ 10, 20 and 30 kHz offset from carrier | –95 dBc/Hz |
| @ 100 kHz offset from carrier | –97 dBc/Hz |
| @ 1 MHz offset from carrier | –105 dBc/Hz |
| @ 10 MHz offset from carrier | –120 dBc/Hz |
| Amplitude Ranges | |
| Dynamic Range | > 101 dB @ 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW |
| Measurement Range | DANL to +30 dBm |
| Display Range | 1 to 15 dB/div in 1 dB steps, ten divisions displayed |
| Reference Level Range | –120 dBm to +30 dBm |
| Attenuator Resolution | 0 to 65 dB, 5.0 dB steps |
| Amplitude Units (Log Scale) | dBm, dBV, dBmv, dBμV |
| Amplitude Units (Linear Scale) | nV, μV, mV, V, kV, nW, μW, mW, W, kW |
| Amplitude Accuracy (single sine wave input < Ref level, > DANL, auto attenuation, 50 Ω Source) | |
| 20 °C to 30 °C | ± 1.3 dB, after 30 minute warm-up; > 4 GHz add ± 1.4 dB |
| –10 °C to 50 °C | Add ± 1.2 dB, after 60 minute warm-up |
| Displayed Average Noise Level (DANL) (RMS detection, 1 Hz RBW, 0 dB attenuation) | |
| Preamp Off, 10 MHz to 4 GHz | –139 dBm |
| Preamp Off, > 4 GHz to 10 GHz | –136 dBm |
| Preamp Off, > 10 GHz to 13 GHz | –130 dBm |
| Preamp Off, > 13 GHz to 20 GHz | –136 dBm |
| Preamp On, 10 MHz to 1 GHz | –159 dBm |
| Preamp On, > 1 GHz to 3 GHz | –156 dBm |
| Preamp On, > 3 GHz to 4 GHz | –154 dBm |
| Spurs | |
| Residual Spurs, Preamp Off (RF input terminated, 0 dB input attenuation) | –90 dBm |
| Residual Spurs, Preamp On (RF input terminated, 0 dB input attenuation) | –100 dBm |
| Input-Related Spurious (0 dB attenuation, –30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz) | –60 dBc, –70 dBc typical |
| Input-Related Spurious Exceptions | –50 dBc @ 3275 MHz |
| Third-Order Intercept (TOI) (–20 dBm tones 100 kHz apart, –20 dBm Ref level, 0 dB input attenuation, preamp Off) | |
| 2.4 GHz | +12 dBm |
| 50 MHz to 500 MHz | > +6 dBm typical |
| > 500 MHz to 2000 MHz | > +8 dBm typical |
| > 2000 MHz to 6000 MHz | > +10 dBm typical |
| > 6000 MHz to 20000 MHz | > +12 dBm typical |
| Second Harmonic Distortion (Preamp Off) | |
| 50 MHz to 500 MHz | –50 dBc |
| > 500 MHz to 800 MHz | –45 dBc |
| > 800 MHz to 3000 MHz | –60 dBc |
| > 3000 MHz | –80 dBc |
| VSWR | |
| > 10 dB input attenuation | 1.5:1 typical |
| General — Input | |
| Maximum Continuous Input | (≥ 10 dB input attenuation) +30 dBm |
| Input Damage Level | ≥ 10 dB input attenuation, > +30 dBm, ± 50 Vdc |
| ESD Damage Level | (≥ 10 dB input attenuation) > 10 kV |
| External Reference Frequencies | 1 MHz, 1.2288 MHz, 1.544 MHz, 2.048 MHz, 2.4576 MHz, 4.8 MHz, 4.9152 MHz, 5 MHz, 9.8304 MHz, 10 MHz, 13 MHz and 19.6608 MHz at –10 dBm to +10 dBm |
| Memory | |
| Internal Trace/Setup Memory | > 13,000 traces |
| External Trace/Setup Memory | Limited by size of USB Flash drive or Compact Flash module |
| Connectors | |
| RF In | Type N, female, 50 Ω, Maximum Input + 30 dBm, ± 50 VDC |
| GPS | BNC, female, reverse polarity |
| External Power | 5.5 mm barrel connector, 12 to 15 VDC, < 5.0 Amps |
| LAN Connection | RJ48C, 10/100 Mbps, Connect to PC or LAN for Remote Access |
| Compact Flash Interface | Type I |
| USB Interface | Type A, Connect Flash Drive and Power Sensor |
| USB Interface | 5-pin mini-B, Connect to PC for data transfer |
| Headset | 2.5 mm miniature phone plug |
| External Trigger In | BNC, female, 50 Ω, Maximum Input ± 5 VDC |
| IF Out | BNC, female, 50 Ω, 37.8 MHz |
| Display | |
| Size | 8.4" |
| Resolution | 800 x 600 |
| Battery | |
| Type | Li-Ion |
| Battery Operation | 2.5 hours, typical |
| Electromagnetic Compatibility | |
| European Union | CE Mark, EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC and Low Voltage Directive 73/23/EEC, 93/68/EEC |
| Australia and New Zealand | C-tick N274 |
| Interference | EN 61326-1 |
| Emissions | EN 55011 |
| Immunity | EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-11 |
| Safety | |
| Safety Class | EN 61010-1 Class 1 |
| Product Safety | IEC 60950-1 when used with Company supplied Power Supply |
| Environmental | |
| Operating Temperature | –10 ºC to 55 ºC |
| Maximum Humidity | 85% |
| Shock | MIL-PRF-28800F Class 2 |
| Storage | –51 ºC to 71 ºC |
Important: Maximum continuous input: +30 dBm (≥10 dB input attenuation). Input damage level: >+30 dBm, ±50 VDC.
Important: High Accuracy Power Meter (Option 0019) requires external USB Power Sensor(s) — sensors (PSN50, MA24104A, MA24106A, MA24108A, MA24118A, MA24126A) are ordered separately.
Important: Options marked with a single asterisk (0040, 0041, 0044, 0045, 0065, 0060, 0061, 0038, 0541, 0542, 0546, 0042, 0043, 0062, 0063, 0046, 0047, 0066, 0067) require Option 0009 (I/Q Demodulation Hardware).
Important: W-CDMA/HSDPA Over-the-Air (Option 0035) and cdmaOne/CDMA2000 1X Over-the-Air (Option 0033) and CDMA2000 1xEV-DO Over-the-Air (Option 0034) require Option 0009 and Option 0031 (GPS Receiver).
Important: Recommended calibration cycle is 12 months.
Important: Product Safety (IEC 60950-1) applies only when used with the Company supplied Power Supply.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Anritsu
Condition
Pre-Owned
Manufacturer
Anritsu
Spec_ana_freq
9 kHz to 13 GHz
19
High Accuracy Power Meter
25
Interference Analyzer
31
GPS Receiver Option
43
13.5 GHz Signal Analyzer
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
