The Anritsu MG724E1/G1 is a compact, lightweight microwave signal generator offered as a build-to-order product. It is designed for medium- and small-capacity microwave line repeater maintenance and adjustment, combining high signal purity and high frequency stability in a small, portable package.

The instrument is best suited to measuring AGC characteristics, squelch function, and signal-to-noise ratio. Its high signal purity and frequency stability also allow it to serve as a general-purpose signal source for microwave receiver adjustment on a production line.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every used unit is inspected and functionally verified in-house by our technicians before it ships, while new units ship factory-sealed exactly as received from the manufacturer.

Compare Other Models in This Series

The MG724E1/G1 is a compact, lightweight microwave signal generator offered as a build-to-order product. The series is designed for medium- and small-capacity microwave line repeater maintenance and adjustment, with high signal purity, high frequency stability, and a wide output level range.

The two models share the same physical platform and output architecture and differ primarily in the microwave band they cover and their related noise and power figures.

Each model below is its own dedicated product page with condition-matched pricing for the pre-owned unit you select. Choose the model that covers your required frequency band, then pick the listing that fits your condition and budget.

The MG724E1 covers 6.3 GHz to 7.8 GHz, while the MG724G1 covers 12 GHz to 13 GHz — the primary distinction between the two models. This band difference is accompanied by different SSB FM noise figures at a 10 kHz offset: –95 dBc/Hz on the MG724E1 and –75 dBc/Hz on the MG724G1.

Power consumption also differs, at ≤10 VA for the MG724E1 and ≤30 VA for the MG724G1 from the same AC 100 V, 50/60 Hz supply. Both models share the –100 to –5 dBm output level range, ±1.5 dB level accuracy, ≤1.7 VSWR, 0.3% frequency accuracy, N-type output connector, and 240 × 135 × 130 mm, ≤4 kg form factor. See the comparison table below for the model-by-model breakdown.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• Coaxial Cord (UG-21D/U · RG-9A/U · UG-21D/U), 2 m: 1 pc
• MX-913/U Connector Cap (N-type): 1 pc
• Power Cord, 2.5 m: 1 pc
• Fuse, 0.2 A: 2 pcs
• Fuse, 0.2 A: 1 pc
• MG724E1 Operation Manual: 1 copy

Product Core & Specifications

Important: RF output level, level accuracy, and VSWR are specified at the end of the attached 2 m cable.

Important: Model designation: MG724[ ] is the version without power supply; MG724[ ]1 is the version with power supply.

Important: Build-to-order product.

About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

• Warranty included
• Functional verification included
• Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
• Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.