Skip to content
The SR3462 1xEV-DO Network Emulator provides the core emulation of a 1xEV-DO Rev. 0/RevA/RevB and eHRPD networks.
A single SR3462 provides emulation of multiple 1xEV-DO sectors. The SR3462 interfaces with the access terminal under test through the RF converters embedded with SR3452 V2 CDMA Network Emulator. The SR3462 connects to the primary SR3452 V2 through a high-density digital connection.
The front panel of the SR3462 includes two LED indicators to provide a quick reference to the status of the equipment. The Emulator LED indicates the state of the SR3462. It flashes while the emulator is initializing. If it is green, the emulator is ready for use. If it is red, the emulator failed to initialize correctly.
The Controller LED illuminates when the emulator is communicating with the AirAccess C2K software running on the system controller PC.
The rear panel of the SR3462 provides I/O connections, including Ethernet and 1xEV-DO digital baseband signals.
This unit provides emulation of multiple 1xEV sectors. The SR3462 interfaces with access terminal under test via the RF converters embedded inside the two SR3452 V2 CDMA Network Emulators
Dual SR3452V2 CDMA Network Emulators: In EV-DO mode, these instruments provide the RF components for the SR3462 EV-DO network emulator. They also provide CDMA 2000 network emulator capabilities used in other product areas such as the C2K-ATS.
TestDrive EV-DO no longer supports older TAS3460 AirAccess Instruments. The only supported Air Access hardware is now SR3452 V2s and SR3462.
As an option, a SR3462 1xEV Rev0/RevA Network Emulator can be added to a single or dual SR3452 V2 configuration to provide either a single RF to operate in 1X or EV-DO mode or two simultaneous RF channels to deliver both 1X and EV-DO network emulation in a single configuration.
Model No
SR3462
Condition
Used
Manufacturer
Spirent