The MT1000A Network Master Pro is a handheld, battery-powered tester designed to facilitate the installation and maintenance of cellular networks. The MU100040B CPRI RF module adds CPRI RF measurements to Anritsu's transport and fiber test platform, with measurements configured and displayed on the 9-inch color touch screen. Together they form a field instrument focused on the Common Public Radio Interface (CPRI) link between baseband and remote radio equipment.

On the CPRI RF side, the platform displays the LTE spectrum of ALU/Nokia, Ericsson, and Huawei CPRI radios and is built to find problems in the field: a fast update rate captures intermittent interferers, spectrum pan and zoom allows detailed analysis of those interferers, and a spectrogram display captures and holds data for intermittent events. Two SFP slots support simultaneous uplink and downlink testing, with SFP data reading and Layer 2 alarm monitoring and display, and auto configuration of CPRI parameters.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every used unit we sell is inspected and functionally verified in-house before it ships, while new units leave factory-sealed exactly as received from the manufacturer. Holding our own stock means quicker turnaround and a single accountable source for both new and pre-owned test and measurement equipment.

Compare Other Models in This Series

The Network Master Pro is a modular handheld platform built around the MT1000A controller mainframe. The mainframe supplies the 9-inch touchscreen, battery, interfaces, and processing, while measurement capability is added through plug-in modules — here the MU100040B CPRI RF Module.

Because the design is modular, the same MT1000A can be configured purely for CPRI RF work or expanded with OTDR and 10G/100G transport modules to address a broader range of fiber and transport testing from one instrument.

Each pre-owned component below is listed as its own dedicated product page with condition-matched pricing. The MT1000A mainframe and the MU100040B module are ordered separately, so confirm the configuration you need for your application.

The MU100040B is the CPRI RF measurement module specifically; it requires Option 1 for CPRI LTE RF Measurements and supports Option 10 for CPRI Base Band Unit Emulation (ALu-Nokia LTE), which also enables the GPS receiver.

The MT1000A is the Network Master Pro mainframe — the host controller with the display, battery, and service interfaces — while the MU100040B is the CPRI RF module that installs into it to provide CPRI spectrum, spectrogram, Layer 2 alarm, and SFP-data measurements. Neither functions as a standalone tester without the other.

The comparison table that follows summarizes how the two part numbers differ in role and in their associated options (for example, the module's Option 1 and Option 10). Match each part number to its own row rather than assuming one carries the other's capabilities.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• MT1000A-006 High Power Supply
• B0690A Soft Case
• B0728A Rear Panel and Screw Kit
• G0310A Li-ion Battery
• G0385A High Power AC Adapter
• J1565A Line Cord USA
• J1594A Line Cord Japan
• J1566A Line Cord Europe
• J1567A Line Cord UK
• J1568A Line Cord Australia
• J1596A Line Cord Korea (one of the power line cords is supplied with the MT1000A)
• Z1746A Stylus
• Z1747A Shoulder Strap
• Z1748A Handgrip

Product Core & Specifications

Important: The MU100040B CPRI RF Module requires Option 1 (CPRI LTE RF Measurements).

Important: Option 10 (MU100040B-010) GPS functionality uses the SMA (f) connector and the supplied 2000-1760-R GPS Antenna; the GPS connection is for use with MU100040B-010 only.

Important: J1667A GPIB–USB Converter is required for SCPI remote control via GPIB.

Important: MT1000A-006 High Power Supply is required for the MU100011A (100G Multirate Module); MT1000A-005 AUX I/O is required to carry the MU100090A.

Important: One of the power line cords (J1565A/J1594A/J1566A/J1567A/J1568A/J1596A) is supplied with the MT1000A.

Important: Laser Safety: IEC 60825-1:2007 Class 1, complies with 21CFR1040.10 and 1040.11 (MU100040B with optical modules).

Important: WLAN/Bluetooth connectivity (MT1000A-003) is available only for certified countries and regions including USA, Canada, Japan and all EU countries.

Recommended pairing: combine the MU100040B CPRI RF Module with the MT1000A OTDR and 10G/100G transport test modules to build a combined fiber and transport tester on a single platform.

About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

• Warranty included
• Functional verification included
• Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
• Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.