Chat Live
Contact Us
sales@valuetronics.com
The DXC100A is a high-performance, passive, matched, differential probe pair designed for use with the DA1800 series differential amplifiers. The probe pair consists of two highly matched individual probes that share a common compensation box, allowing the attenuation factor on both probes to be switched simultaneously between 10x and 100x. This shared-compensation design keeps the two probe channels balanced as a single differential pair rather than two independently adjusted single-ended probes.
When the DXC100A is used with the DA1822 or DA1855A differential amplifier, the probe's attenuation factor is automatically incorporated into the effective gain display and into the location of the decimal in the voltage generator display. Although primarily intended for the differential amplifiers, the probe pair can also be used with any oscilloscope or plug-in unit that provides an input impedance of 1 MΩ / 15-26 pF and one inch (25.4 mm) spacing between connectors. When used on a differential amplifier, the compensation box allows for precise adjustment and matching of the transient response and optimization of the system Common Mode Rejection Ratio (CMRR).
ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every used unit we offer is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.
| Specification | Value |
|---|---|
| General | |
| Attenuation factor | 10 or 100 |
| Bandwidth (-3 dB) | 250 MHz |
| System Bandwidth (-3 dB) (with DA1855) | 100 MHz |
| System Bandwidth (-3 dB) (with DA1822) | 10 MHz |
| System Risetime (with DA1855) | 3.5 ns |
| System Risetime (with DA1822) | 35 ns |
| Input Resistance | 1 MΩ ± 1% |
| Input Capacitance | 10.5 pF ± 0.5 pF |
| Compensation | 15 to 26 pF |
| Maximum non-destructive Input Voltage | 500 V DC + peak AC |
| Length | 1.2 meter |
| Environmental Characteristics | |
| Operating Range | 0° to 50°C |
| Non-Operating | -4° to 75°C |
| Physical Characteristics | |
| Weight | 0.21 kg (0.47 lb) |
| Shipping Weight | 0.45 kg (1 lb) |
| Warranty | 1 year |
Important: Maximum non-destructive input voltage: 500 V DC + peak AC.
Important: The DXC100A can be used with any oscilloscope or plug-in unit having an input impedance of 1 MΩ / 15-26 pF and one inch (25.4 mm) spacing between connectors.
Recommended pairing: designed for use with the DA1800 series differential amplifiers; with the DA1822 or DA1855A, the attenuation factor is automatically incorporated into the amplifier's effective gain display.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
DXC100A
Condition
Pre-Owned
Diff_probe_freq
250 MHz
Length_meter
1.2 meter
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
