Chat Live
Contact Us
sales@valuetronics.com
The HT Italia HTFLEX33E is a flexible clamp meter designed to measure AC current up to 3000 A RMS using a flexible coil that wraps around the conductor under test. Unlike rigid-jaw clamp meters, the flexible coil design allows the probe to be looped around large cables, busbars, or conductor bundles that cannot fit inside conventional clamp jaws, making it well suited to measurements in distribution panels and around large electrical infrastructure.
A flexible clamp meter of this type is used to measure current non-invasively — the conductor does not need to be broken or disconnected to make the measurement. The HTFLEX33E supports conductors up to 174 mm in diameter and a 600 mm flexible coil length, which extends its reach to large-conductor applications where standard clamp meters cannot mechanically engage the conductor.
ValueTronics International stocks and ships test and measurement equipment from its 20,000 sq ft secure facility at 1675 Cambridge Drive, Elgin, Illinois. Equipment is held, inspected, and processed in-house by our team rather than drop-shipped from third parties, giving our customers a single accountable source for current-condition specifics, accessory verification, and order fulfillment on every transaction.
| Electrical Specifications | |
|---|---|
| Measurement range | 3000A ACRMS |
| Output signal (@ 1000ARMS, 50Hz) | 85mV AC |
| Output impedance (@ 50Hz) | 170Ω ± 20Ω |
| Min allowed load impedance | 100kΩ |
| Accuracy (at 25°C) | ± 0.5%rdg |
| Maximum frequency | 10Hz Ă· 20kHz |
| Position sensitivity | ± 2%rdg |
| Temperature coefficient | ± 0.005%rdg maximum /°C |
| Measurement category | CAT III 1000V, CAT IV 600V |
| Insulation | Double insulation |
| Pollution degree | 2 according to IEC/EN61010-1 |
| General Specifications | |
| Flexible clamp length (double insulation) | 600 mm |
| Maximum conductor diameter | 174 mm |
| Instrument connection cable length | 2m (double insulation) |
| Output connection | 2m cables with Hypertac connector |
| Operating temperature | -20°C ÷ +80°C |
| Storage temperature | -40°C ÷ +90°C |
| Operating humidity | 15% Ă· 85%HR, without condense |
| Reference Guidelines | |
| Safety | IEC/EN61010-1:2001 IEC/EN61010-031:2002 IEC/EN61010-2-032:2002 |
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
HT
Condition
New
Manufacturer
HT Instruments
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
