• CM94 Flir Clamp Meter
1 1
New
Earn Loyalty with Rewards
Compare

FLIR CM94 2000 A AC/DC Utility Clamp Meter

FLIR CM94 2000 A AC/DC Utility Clamp Meter

$392.99
$392.99 $0
Shipping calculated at checkout.
Request a Quote
Estimated Delivery in
5 - 7
business days (based on availability)

Request a Quote To Get An EDU Discount

Login & Get 2% Back on Purchases
Login or Sign Up for Loyalty

FLIR CM94 2000 A AC/DC Utility Clamp Meter

Key Features At A Glance

  • CAT IV-1000 V safety rating for work on relays, distribution panels, switchgear, service conductors, feeders, and production power lines
  • 2000 A AC and DC current measurement with True RMS for accurate readings on high-current equipment
  • 55 mm (2.2 in) jaw opening accommodates large conductors, busbars, or multiple conductors
  • VFD mode applies a digital low-pass filter for accurate AC voltage measurements in noisy signal environments on large motors and motor controls
  • LoZ (low impedance) mode eliminates ghost voltage errors on both AC and DC voltage measurements
  • 6000-count backlit display with measurement of voltage, current, resistance, capacitance, frequency, temperature (-50°C to 1000°C), continuity, and diode test
  • Rugged construction with IP40 rating and 2 m (6.5 ft) drop test certification
  • Non-contact voltage (NCV) detection and one-hand thumb-dial operation
View full details
More Details
Specifications
Datasheets

The FLIR CM94 is a 2000 A AC/DC utility clamp meter built for high-current measurements in demanding utility and industrial job sites. With an oversized 55 mm jaw, the CM94 securely clamps around large conductor wires and busbars to deliver accurate current readings up to 2000 A on both AC and DC circuits. A CAT IV-1000 V safety rating places this instrument in the highest IEC measurement category, designed for use at the origin of low-voltage installations near utility service equipment.

The CM94 is intended for utility workers, industrial electricians, and electrical contractors who service relays, distribution panels, switchgear, service conductors, feeders, and production power lines. VFD mode targets the specific challenge of measuring noisy AC voltage waveforms produced by variable frequency drives — by applying a digital low-pass filter, the CM94 returns correct fundamental measurements when working on large motors and motor controls where unfiltered readings would otherwise be distorted by switching harmonics.

ValueTronics has supported the test and measurement community since 1992 from our 20,000 sq ft secure warehouse at 1675 Cambridge Drive, Elgin, Illinois. This is the operational backbone behind every transaction we handle, and it is what distinguishes a stocking, hands-on T&M specialist from a drop-ship reseller.

Brand Heritage

FLIR Systems was acquired by Teledyne Technologies in 2021, and the FLIR test and measurement instrument line — including the CM clamp meter series — continues to be developed and sold under the FLIR brand within the Teledyne FLIR group.

Accessories Supplied

  • Test lead set
  • Quick start guide
  • Manual
  • Soft carrying pouch
  • Banana plug Type-K thermocouple

Product Core & Specifications

Basic Measurement Capabilities
Safety category rating CAT IV-1000 V
True RMS Yes
Features
Data hold Yes
Relative DC zero Yes
LoZ mode (auto range) Yes
VFD Yes
Jaw size 55 mm (2.2 in) max
Non-contact voltage (NCV) Yes
Measurement and Analysis Range & Resolution Basic Accuracy
AC current 200.0, 2000 A ±2%
DC current 200.0, 2000 A ±2%
AC voltage 6.000, 60.00, 600.0, 1000 V ±1.2% / 5d
AC voltage (digital low pass filter - VFD) 6.000, 60.00, 600.0, 1000 V ±2%
LoZ mode AC voltage 6.000, 60.00, 600.0, 1000 V 1.5%
DC voltage 6.000, 60.00, 600.0, 1000 V ±0.5%
LoZ mode DC voltage 6.000, 60.00, 600.0, 1000 V 1.3%
Frequency 40.00 Hz to 400.0 Hz (ACA)
50.00 Hz to 400.0 Hz (ACV)		 ±1%
±1%
Resistance 600.0, 6.000 k, 60.00 kΩ
600.0 kΩ
6.000 M
40.00 MΩ		 ±0.5%
±0.8%
±1.2%
±2.3%
Diode test 1.000 V ±1.0%
Capacitance 60.00 nF, 600.0 nF, 6.000 µF, 60.00 µF, 6000.0 µF, 2000 µF ±2.0%
Temperature -50°C to 1000°C (-58°F to 1832°F) ±0.3%
Continuity 10 to 200 Ω, 2 kHz buzzer
Display
Screen 3-5/6 digits 6000 counts
3-½ digits 1999 counts for Hz
Backlight Yes
Auto power off 34 minutes
Overload indication “OL” or “-OL”
Low battery indication Yes
General
Operating temperature -10°C to 50°C (14°F to 122°F)
Operating relative humidity Maximum relative humidity 80% for temperature up to 31°C (88°F) decreasing linearly to 50% relative humidity at 50°C (122°F)
Storage temperature -20°C to 60°C (-4°F to 140°F) <80% RH (with battery removed)
Drop Test 2 m (6.5 ft)
IP rating IP40
Certifications UL, CE, CSA, RCM
Battery type 2× AA
Size (L × W × H) 269 × 106 × 51 mm (10.6 × 4.2 × 2.0 in)
Weight 700 g (24.7 oz)
Box contents Test lead set, quick start guide, manual, soft carrying pouch, banana plug Type-K thermocouple
Important: Maximum input voltage: 1000 V on AC and DC voltage ranges. CAT IV-1000 V safety rating applies — verify the working environment matches the instrument's measurement category before connection.Recommended pairing: use the banana plug Type-K thermocouple supplied in the box for temperature measurements from -50°C to 1000°C (-58°F to 1832°F).

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.

Model No

FLIR

Condition

New

Manufacturer

Flir

Amps

2 kA

Volts

1 kV

Flir CM94
Product collection banner Product collection mobile banner
Compare All Models