3540 FC KIT Fluke Data Logger New

Measures:

• Single, split, or three phase loads
• Voltage, current, and frequency
• Active power, non-active power, and power factor
• Total harmonic distortion

• Wireless data collection or internal memory sufficient for 1 week with 1 second data intervals
• Remotely monitor real-time and historical power variable data
• Visualize data with software trending, graphing, and timeboxing
• Auto-generated alarms when power variables deviate from pre-set thresholds
• Power options: Battery, power supply, or power from the measurement line
• Size: (W x H x D) 7.8 x 6.6 x 2.2"
• IP Rating: IP 50; IEC 60529

Accessories Included:

• Three-Phase Power Monitor
• Voltage Test Lead, 3-phase + N
• 4 x Dolphin Clips, Black
• 3 x i173x-flex1500 iFlex Current Probe, 12" (30.5 cm)
• Set of color-coded Wire Clips
• Mains Power Cable
• Set of 2 test leads with stackable plugs, 3.9" (10 cm)
• Set of 2 test leads with stackable plugs, 6.6' (1.5 m)
• DC Power Cable
• Input Connector Decal
• 4 GB USB Flash Drive (includes firmware updates, and Open Source software)
• WiFi to USB Adapter
• Magnet Hanger Kit

Specifications:

• Single and Three-Phase Topologies: Wiring configurations: 1-Φ, 1-Φ IT, Split-phase, 3-Φ wye, 3-Φ wye IT, 3-Φ wye balanced, 3-Φ delta, 3-Φ Aron/Blondel (2-element delta), 3-Φ delta open leg, 3-Φ high leg delta, 3-Φ delta balanced. Currents only (load studies)
• Voltage Inputs: Number of inputs: 4 (3 phases and neutral)
• Maximum input voltage: 1000 Vrms (1700 Vpk) phase to neutral
• Input Impedance: 10 MΩ each phase to neutral
• Bandwidth: 42.5 Hz to 3.5 kHz
• Scaling 1:1, variable
• Current Inputs Number of inputs: 3, mode selected automatically for attached sensor
• Current Sensor Output Voltage Clamp: 500 mVrms / 50 mVrms; CF 2.8
• Rogowski coil: 150 mVrms/15 mVrms at 50 Hz, 180 mVrms/18 mVrms at 60 Hz; CF 4; all at nominal probe range
• Bandwidth(-3 dB): 42.5 Hz to 3.5 kHz
• Scaling: 1:1 and variable
• Data Acquisition Resolution: 16-bit synchronous sampling
• Sampling Frequency: 10.24 kHz at 50/60Hz, synchronized to mains frequency
• Input Signal Frequency: Mains 50/60 Hz (42.5 to 69 Hz)
• Total Harmonic Distortion: THD for voltage and current is calculated on 25 harmonics
• Current: Half cycle RMS (10 ms at 50 Hz, 8.3 ms at 60 Hz)
• Power: 200 ms
• Interfaces USB-A: Firmware updates, max. supply current: 120 mA
• Power Supply: Voltage Range: Nominal 100 V to 500 V (85 V min to 550 V max) using safety plug input
• Mains Power: Nominal 100 V to 240 V (85 V min to 265 V max) using IEC 60320 C7 input
• Efficiency: ≥68.2 % (in accordance with energy efficiency regulations)
• Mains Frequency: 50/60 Hz ±15 %

General Specifications

• Color LCD Display: 4.3-inch active matrix color TFT, 480 pixels x 272 pixels, resistive touch panel
• Warranty: 3540 FC and built-in power supply 2 years (battery not included)
• Accessories: 1 year
• Calibration Cycle: 2 years
• Dimensions 3540 FC: 7.8 x 6.6 x 2.2" (19.8 x 16.7 x 5.5 cm)
• Detachable Power Supply: 5.1 x 5.1 x 1.8" (13.0 x 13.0 x 4.5 cm)
• 3540 FC with Power Supply Attached: 7.8 x 6.6 x 4.0" (19.8 x 16.7 x 9 cm)
• Weight: 2.5 lb (1.1kg)
• Tamper Protection: Kensington lock

The 3540 FC KIT is a data logger from Fluke. Powered from the measurement circuit, configuration checker can automatically correct connection errors. Monitors equipment for changes in key electrical variables. Current, voltage, frequency, and energy consumption fluctuates when machinery experiences excess load. Screen assets for performance or premature wear using the non-invasive 3540 FC.