1 1
Used
Compare

309 Hypatia Milli Ohmmeter Used

309 Hypatia Milli Ohmmeter Used

Shipping calculated at checkout.
check availability
Request a Quote
Login & Get 2% Back on Purchases
Login or Sign Up for Loyalty

Additional Features:

Electrical

Impedance Measurement

  • Accuracy: ± 1% of reading (when the test current is > 500μ / impedance in Ohms and > 30 mA)
  • Range: 0 to 100 Ohms
  • Measurement Technique: Successive approximation analog to digital conversion of sensed voltage and current
  • Measurement window: Either 2 or 3 full sine waves depending upon line frequency (e.g. 3 at 60 Hz, 2 at 50 Hz)
  • Sample rate: ~ 53 KHz, yielding ~ 2.6K voltage and 2.6K current samples per measurement window at 60 Hz, and ~ 2.1K voltage and 2.1K current samples/window at 50 Hz
  • Mathematical conversion to true rms voltage and current values, division independent of phase to yield impedance
  • Display derived from four layer stack averaging
  • Voltage is sensed at the probe heads by internal probe sense lines or, for Model 109 probes, by precision Kelvin sensing
Share on
View full details
More Details
Specifications
Datasheets

Digital Current Measurement

  • Accuracy: ± 1% of reading ± 4 mA
  • Range: 0 to 144 Amps rms

Bar Graph Current Measurement

  • Accuracy: ± 1% of reading ± 4 mA at transition points (every 2.5 Arms)
  • Range: 2.5 to 77.5 Amps rms (0 to 2.5 Arms implied) (Note 3, Graph 2)
  • Measurement Technique: Logical translation of digital current measurement

Digital Timer

  • Accuracy: ± .1% (Digital Timer and Audio / Visual Alerts applicable to Model 309 or, if server driven, Model 308)
  • Range: 1 second to 59 minutes, 59 seconds (extended times possible under server software)
  • Internal Reference: 16.777 MHz (2e24) crystal controlled system clock

Audio/Visual Alerts

  • When enabled, sounds and flashes when any user specified test current or impedance limit is violated
  • Accuracy: Logically detected. The accuracy therefore exactly matches the accuracy of associated measurements

Operating Duty Cycle

  • Continuous to test currents of 35 Amps
  • Derate linearly to 50% duty cycle at 60 Amps
  • Maximum Cycle Period: 35 to 60 Amps: 4 Minutes
  • Maximum allowed common mode voltage to ground: 50 Vrms, 71 Vpeak or dc
  • Maximum normal mode open circuit probe source voltage (at 132 Vrms line voltage): 8.6 Vrms, 12.1 Vpeak

Input Power Requirements

  • 90 to 132 Volts rms
  • 48 to 66 Hertz sine wave
  • Maximum Power: 396 Watts (3.0 Arms at 132 Vrms)

Check Resistor

  • Resistance: 100 milliohms ± 1%
  • Maximum continuous current: 17.5 Amps

Verification Schedule

  • There are no hardware calibration adjustments, and thus no hardware calibration is required or possible
  • Software calibration data is available, but it's normally unnecessary to modify this data 
  • Complete the formal performance verification procedure annually or following any repair service

Safety Certification 

  • Designed and manufactured to meet or exceed UL 3111 
  • Instruments manufactured before January 2008 were so listed by ETL

Environmental\

  • Operating Temperature Range: 5 to 40°C
  • Relative Humidity Range: 0 to 90% non-condensing

Physical

Overall Dimensions

  • Height: 10.92 centimeters (4.30 inches)
  • Width: 21.15 centimeters (8.33 inches)
  • Depth: 26.0centimeters (10.24 inches)

The Hypatia 309 is a High Current Sourcing Milliohm Meter.

Model No

309

Condition

Used

Manufacturer

Hypatia

Hypatia_308_309
Compare All Models
Product collection banner Product collection mobile banner