HT7010 HT Instruments Clamp Meter New

Manufacturer Specifications:

ELECTRICAL SPECIFICATION

Accuracy is indicated as [% rdg + dgt]. It is referred to the following reference conditions: 23°C ± 5°C with RH < 80%

DC Voltage

• Range  1.8 ÷ 600.0V
• Resolution Accuracy  0.1V ±(1.0% rdg + 2 dgt)
• Input impedance   4kΩ if VIN ≤ 30V to 200kΩ if VIN=600V
• Overload protection  600Vrms AC  0.6 ÷ -600.0V ±(1.0% rdg + 4 dgt)-
• Max operation time: 30s if V ≥ 30V 

AC Voltage

• Range  0.00 ÷ 199.9V  0.1V  ±(1.5%rdg + 5 dgt)
• Resolution Accuracy  from 4kΩ if VIN ≤ 30V  to 200kΩ if VIN=600V
• Input impedance  600Vrms AC

Overload protection

• Max operation time: 30s if V ≥ 30V
• Frequency range: from 50 Hz to 500 Hz 

AC Current

• Range 0.6 ÷ 400.0A
• Resolution 0.1V
• Accuracy  ±(1.8% rdg + 3 dgt)
• Input impedance 50 - 60H
• Overload protection 400Arms
• Readings less than 50A: add ± 3 dgt to accuracy 

Resistance and test continuity

• Range0 ÷ 99.9Ω   100 ÷ 2000Ω
• Resolution0.1Ω  1Ω
• Accuracy ±(2.0% rdg + 10 dgt) ±(2.0% rdg + 2 dgt)
• Buzzer  ≤ 25Ω
• Overload protection 600Vrms AC
• Max open voltage: 1.5V

General Specifications

Features

• Auto Selection on ACV, DCV, ACA and Ohm
• Data Hold
• Auto power off
• Continuity Beeper

Supply

• Battery type:  1 battery 9V NEDA 1604 IEC 6F22 JIS 006P
• Low battery indication:  “+-” is displayed when the battery level is too low
• Battery life:  about 250 hours
• AutoPowerOff:  About 30 minutes after power-on

Display

• Characteristics: 3 ¾ dgt (6000 counts) plus decimal point, unit symbol
• Sample rate:  5 times/sec
• Conversion mode:  Mean Value

Mechanical characteristics

• Size: 198(L) x 66(La) x 46(H)mm
• Weight (including battery): about 260g
• Jaws opening: 35mm
• Max conductor size: 27mm

Climatic conditions

• Reference temperature:  23° ± 5°C
• Operating temperature:  0 ÷ 40 °C
• Operating humidity:  < 75% RH
• Storage temperature: -20 ÷ 60 °C
• Storage humidity:  < 80% RH

Safety standards

• Comply with:  EN 61010-1
• Insulation: Class 2, Double insulation
• Pollution: Level 2
• For inside use, max height: 2000m
• Installation category: CAT III 600V between inputs and to ground

Technical Specifications:

• Clamp Meters/Clamp Meters Template
• Maximum Current AC 400 A
• Maximum Voltage AC 600 V
• Maximum Voltage DC 600 V
• Maximum Conductor Size 1.37 IN
• Resistance Yes
• Auto Ranging/Manual Auto Ranging

Test Equipment General Attributes

• Safety Approval CE
• Product Weight 0.57 LBS
• Product Height 1.81 IN
• Product Length 7.79 IN
• Product Width 2.59 IN
• Shipping Weight 1 LBS
• HTS/Schedule B Number  90303330
• ECCN Number 8033100184792
• Battery Type  9v
• Country of Origin Taiwan