ADG-L-1000-45-15 Preen DC Power Supply New

ADG-L-1000-45-15 — Programmable DC Power Supply (15kW/1000V/45A Auto Range)

In summary, the Preen ADG-L-1000-45-15 is part of the ADG-L Series, a high-density programmable DC power supply available in 5 kW, 10 kW, and 15 kW chassis with output voltage from 30 V to 1000 V (up to 2000 V via series) and currents up to 510 A (up to 2550 A via parallel).

The Preen ADG-L Series is a high-density programmable DC power supply available in 5 kW, 10 kW, and 15 kW chassis with output voltage from 30 V to 1000 V (up to 2000 V via series) and currents up to 510 A (up to 2550 A via parallel). Built on PWM and DSP control with 3U rack form factor, ADG-L delivers ≤ 5 ms transient response, ≤ 0.03 % line regulation, and full programmability for renewable-energy, EV, and protection-component test applications.

What is the ADG-L-1000-45-15 used for?

The ADG-L-1000-45-15 is used across photovoltaic inverter testing, electric-vehicle component test, battery emulation, DC/DC converter R&D, fuse and air-circuit-breaker verification, AI-server and data-center power-module validation. Specific test methodologies include Solar Array Simulation, static & dynamic MPPT efficiency validation, programmable DC pulse and slew-rate playback, and protection-component overcurrent testing.

Where does the ADG-L-1000-45-15 fit in a typical lab workflow?

The ADG-L-1000-45-15 integrates into bench, ATE, and high-power production environments through standard RS-232, RS-485, Ethernet, and USB control. Engineers use it to repeatably simulate global mains and DUT operating conditions during design verification, certification pre-compliance, and end-of-line testing — replacing manual variac/MG-set configurations and improving test repeatability and data capture.

From a measurement standpoint, the ADG-L Series is benchmarked against EN 50530, SAS (Solar Array Simulation); RoHS Compliant; CE Marked. Within this product line the ADG-L-1000-45-15 delivers the variant-specific output described in this model's specification block below — chosen to match the most common DUT power, voltage, and frequency requirements in the target application.

Preen (AC Power Corporation, founded 1989) is one of the world's highest-volume programmable power-source manufacturers, with ISO 9001:2015 certified manufacturing facilities in Taipei, Tianjin, and Suzhou, and a U.S. service center in Irvine, California. Preen products carry CE and RoHS certifications and have been recognized with multiple Taiwan Excellence Awards for the AFV, AFV-P, and ADG-P product lines — placing the brand in the established commercial tier alongside California Instruments, Chroma, and Pacific Power Source.

How does it compare to alternative AC/DC sources?

• Compared with California Instruments and Pacific Power Source: Preen typically offers 10–20% lower pricing with strong multi-phase capability — ideal for budget-conscious compliance labs and three-phase applications.
• Compared with Chroma 61800 series: Preen provides comparable programmability and broader high-power three-phase coverage at competitive ASP.
• For avionics 400 Hz testing, Preen frequency-converter options (AFC) and AFV+ Type-C 300–840 Hz cover MIL-STD-704 / DO-160 workflows.

Accessories Supplied

• AC input power cable
• Operation manual
• PC remote control software (Preen Program)
• Calibration certificate (when applicable)

Specifications

Specifications below are for the ADG-L Series. The ADG-L-1000-45-15 variant within this series is configured as: Programmable DC Power Supply (15kW/1000V/45A Auto Range).

Unit Options

The ADG-L-1000-45-15 accepts the following factory-installed options. Multiple options may be selected.

Calibration Options

Factory calibration is provided with each new ADG-L-1000-45-15 per the manufacturer's datasheet. Additional ISO 17025-accredited or Z540.1 calibration upgrades are available on request — contact your Test Architect to scope.

This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.