Chat Live
Contact Us
sales@valuetronics.com
The Agilent U2701A and U2702A are USB modular oscilloscopes that combine a set of essential features for analyzing designs in an affordable way. They are offered in two bandwidths — 100 MHz on the U2701A and 200 MHz on the U2702A — and acquire simultaneously on two channels, Ch 1 and Ch 2. Each unit includes standard debugging capability such as advanced triggering, automatic measurements, and math functions including FFT.
An oscilloscope captures voltage waveforms over time, letting an engineer see a signal's amplitude, frequency, timing, and shape. The U2701A and U2702A connect to a PC through a Hi-Speed USB 2.0 interface for easy plug-and-play setup, which makes them suited to the education, design validation, and manufacturing industries. The dual-play function lets a unit serve as a standalone instrument or scale up within a cardcage alongside additional scopes or other Agilent USB modular products, providing a complete solution for system development.
ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.
Agilent Technologies was established in 1999 as a spin-off of Hewlett-Packard's test and measurement business. In 2014, Agilent's electronic measurement business was separated again to form Keysight Technologies, under which this product line was subsequently offered.
The U2701A/U2702A USB Modular Oscilloscope family consists of two models that share a common architecture and differ primarily in bandwidth. Both acquire simultaneously on two channels, reach up to 1 GSa/s when channels are interleaved, and carry up to 32 Mpts of standard waveform memory.
Both models offer the dual-play function, allowing each to run as a standalone instrument over Hi-Speed USB 2.0 or to be installed in a modular product chassis for system expansion. Advanced triggering, four math functions with FFT, and the Agilent Measurement Manager software are standard across the family.
Each model in this family is listed on its own dedicated product page, with pricing matched to the pre-owned unit you select. Choose the model whose bandwidth fits your application, then open the listing for your preferred condition.
The two models are separated by bandwidth: the U2701A provides DC to 100 MHz with a calculated rise time of 3.5 ns, while the U2702A provides DC to 200 MHz with a calculated rise time of 1.75 ns. Sample rate, memory depth, vertical resolution, and trigger capability are otherwise common to both.
The included probe tracks the bandwidth tier as well: the U2701A ships with 10:1 150 MHz passive probes (N2862A) and the U2702A ships with 10:1 300 MHz passive probes (N2863A). The comparison table below summarizes these per-model differences.
| Model | Bandwidth | Rise Time | Max Sample Rate |
|---|---|---|---|
| U2702A | 200 MHz | 1.75 ns | 1 GSa/s |
| U2701A | 100 MHz | 3.5 ns | 1 GSa/s |
Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.
| Specification | Value |
|---|---|
| Vertical System: Oscilloscope Channels | |
| Bandwidth (–3 dB) | DC to 200 MHz |
| Scope channels | Ch 1 and Ch 2 simultaneous acquisition |
| AC coupled | 3.5 Hz to 200 MHz |
| Calculated rise time (= 0.35/bandwidth) | 1.75 ns |
| Single-shot bandwidth | 200 MHz |
| Range | 2 mV/div to 5 V/div (1 MΩ) |
| Maximum input | CAT I 30 Vrms, 42 Vpk |
| Offset range | ±4 div (Example: ±8 mV on 2 mV/div; ±20 V on 5 V/div) |
| Dynamic range | ±4 div |
| Input impedance | 1 MΩ: ≈ 16 pF |
| Coupling | AC, DC, Ground |
| BW limit | ≈ 25 MHz |
| Standard probes | 10:1 Passive probe 300 MHz 1.2 m |
| ESD tolerance | ±2 kV |
| Noise peak-to-peak | 3 mVpp |
| DC vertical offset accuracy | ≤ 200 mV/div: ±0.1 div ±2.0 mV ±0.5% offset value; > 200 mV/div: ±0.1 div ±2.0 mV ±1.5% offset value |
| DC vertical gain accuracy | ±4.0% of full scale |
| Scope channel triggering trigger sensitivity | < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div |
| Single-cursor accuracy | ±{DC vertical gain accuracy + DC vertical offset accuracy + 0.2% full scale (~2 LSB)} |
| Dual-cursor accuracy | ±{DC vertical gain accuracy + 0.4% full scale (~1 LSB)} |
| Acquisition: Oscilloscope Channels | |
| Real time sample rate — 2 channels interleaved | 1 GSa/s |
| Real time sample rate — each channel | 500 MSa/s |
| Standard memory depth — 2 channels interleaved (Normal / Single-shot) | 32 Mpts / 64 Mpts |
| Standard memory depth — each channel (Normal / Single-shot) | 16 Mpts / 32 Mpts |
| Vertical resolution | 8 bits |
| Peak detection | Yes |
| Averaging | Any number from 1 to 999 |
| Filter | Sin(x)/x interpolation for time base 1 ns to 100 ns |
| Sweep modes | Auto, normal, single |
| Horizontal | |
| Range | 1 ns/div to 50 s/div |
| Time base accuracy | 20 ppm |
| Delay range | Pre-trigger: –100 %; Post-trigger: +100 % |
| Modes | Main, roll, XY |
| XY | Yes |
| Reference position | Center |
| Trigger System | |
| Sources | Ch 1, Ch 2, Ext (not applicable for TV trigger) |
| Modes | Normal, single, auto trigger |
| Holdoff time | 60 ns |
| Selections | Edge, pulse width, TV |
| Edge | Triggers on a rising or falling edge, alternating, or either edge of any source |
| Pulse width | Triggers on a pulse width greater than, equal to, or less than a specified time limit, with time limits ranging from 16 ns to 10 s. Minimum lower limit: 8 ns; Minimum upper limit: 16 ns; Maximum pulse width setting: 10 s |
| TV | Triggers on one of three standard television waveforms: NTSC, PAL, SECAM. TV trigger sensitivity: 0.6 division of sync signal. Modes supported include Field 1, Field 2, all fields, or any line within a field. |
| Autoscale | Single-button automatic setup of all channels |
| Oscilloscope Channel Triggering | |
| Range (internal) | ±4 div from center screen |
| Coupling | AC (< 15 Hz); LF reject (~ 35 kHz); HF reject (~ 35 kHz) |
| External (EXT) Triggering | |
| Input impedance | 1 MΩ: ≈ 16 pF |
| Maximum input | CAT I 30 Vrms, 42 Vpk |
| Range | DC coupling: trigger level ±1.25 V and ±2.5 V |
| EXT trigger pulse width | > 2.5 ns |
| Trigger level sensitivity (±1.25 V range) | DC to 100 MHz: 100 μV; > 100 MHz: 200 μV |
| Trigger level sensitivity (±2.5 V range) | DC to 100 MHz: 250 μV; > 100 MHz: 500 μV |
| Display | |
| Interpolation | Sin(x)/x |
| Display types | Dots and vectors |
| Persistence | Off, infinite |
| Format | XY, roll |
| Measurement Features | |
| Automatic measurements | Measurements are continuously updated. Cursors track last selected measurement. |
| Voltage | Peak-to-peak, maximum, minimum, average, amplitude, top, base, Vrms, overshoot, preshoot, crest, standard deviation, cycle RMS, RMS AC |
| Time | Frequency, period, +width, –width, +duty cycle, –duty cycle, rise time, fall time, delay, phase |
| Frequency | Maximum peak |
| Cursors | Modes: Manual; Type: Time, voltage and frequency (FFT); Measurements: DT, DV, frequency, Peak Scan (FFT), DPeak |
| Math functions | Add, subtract, multiply, FFT, divide |
| FFT | |
| Points | 1250 points (for 500 ns and above) |
| Source of FFT | Source channels 1 or 2 |
| Window | Hanning, Hamming, Blackman-Harris, Rectangular, Flattop |
| Noise floor | –50 dB to –90 dB depending on averaging |
| Amplitude | Display in dBV |
| Maximum frequency | 250 MHz |
| General / Product Characteristics | |
| Remote interface | Hi-Speed USB 2.0; USBTMC 488.2 Class device |
| Power consumption | +12 VDC, 2 A; Installation Category III |
| Operating temperature | 0 °C to +50 °C |
| Operating humidity | 20% to 85% RH (non-condensing) |
Important: Maximum input is CAT I 30 Vrms, 42 Vpk. Under standalone use, measurement is limited to CAT I 30 Vrms; for high-voltage measurement up to CAT I 300 Vrms, the L-Mount kit must be installed on the module and screwed to the product chassis for proper grounding, and the provided 10:1 probes (N2862A/N2863A) must be used to avoid damaging the instrument.
Important: The Hi-Speed USB 2.0 / USBTMC 488.2 remote interface is compatible with Microsoft Windows operating systems only and requires a direct USB connection to the PC so the appropriate driver can be installed in the USB modular instrument.
Recommended pairing: use the Agilent U2781A USB Modular Product Chassis to operate the oscilloscope in a cardcage with additional modules, per the dual-play configuration.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Agilent
Condition
Pre-Owned
Manufacturer
Keysight
Osc_ch
2
Osc_freq
200 MHz
Osc_r
1 MΩ
Osc_sampl
1 GSa/s
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
