Chat Live
Contact Us
sales@valuetronics.com
Request a Quote To Get An EDU Discount
Couldn't load pickup availability
The Keysight N9010B is the EXA X-Series signal analyzer with a capacitive multi-touch interface, positioned by Keysight as a cost-effective, economy-class instrument for signal analysis extending up to millimeter-wave frequencies. It is built around delivering maximum value in signal analysis—helping an engineer find the answer faster, whether the goal is tighter design margins or shorter test times.
A signal analyzer measures and characterizes signals in the frequency domain, resolving their amplitude, frequency, and spectral content. The N9010B carries a PowerSuite set of measurements—channel power, occupied bandwidth, adjacent channel power, power statistics CCDF, harmonic distortion, third-order intermod, burst power, spurious emission, and spectrum emission mask—with results referenced to communications formats including W-CDMA, IS-95, and cdma2000. With Option EMC the analyzer adds CISPR-compliant EMI bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz) and MIL-STD-461E-compliant EMI bandwidths (10 Hz to 1 MHz).
ValueTronics stocks the equipment it sells from its own 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house by our technicians before it ships, while new units ship factory-sealed exactly as received from the manufacturer.
Keysight Technologies traces its instrument heritage to Hewlett-Packard, whose test and measurement business was spun out as Agilent Technologies in 1999. That measurement business was then established as Keysight Technologies in 2014, which is the brand under which this analyzer is produced today.
| Specification | Value |
|---|---|
| Frequency Range (DC coupled) | |
| Option 503 | 10 Hz to 3.6 GHz |
| Option 507 | 10 Hz to 7 GHz |
| Option 513 | 10 Hz to 13.6 GHz |
| Option 526 | 10 Hz to 26.5 GHz |
| Option 532 | 10 Hz to 32 GHz |
| Option 544 | 10 Hz to 44 GHz |
| Frequency Reference | |
| Aging rate (Option PFR) | ± 1 x 10–7 / year |
| Aging rate (Standard) | ± 1 x 10–6 / year |
| Temperature stability, 20 to 30 °C (Option PFR) | ± 1.5 x 10–8 |
| Temperature stability, 20 to 30 °C (Standard) | ± 2 x 10–6 |
| Achievable initial calibration accuracy (Option PFR) | ± 4 x 10–8 |
| Achievable initial calibration accuracy (Standard) | ± 1.4 x 10–6 |
| Frequency Span | |
| Range | 0 Hz (zero span), 10 Hz to maximum frequency of instrument |
| Resolution | 2 Hz |
| Accuracy (swept) | ± (0.25 % x span + horizontal resolution) |
| Accuracy (FFT) | ± (0.10 % x span + horizontal resolution) |
| Sweep Time and Triggering | |
| Range, Span ≥ 10 Hz | 1 ms to 4000 s |
| Accuracy, Span ≥ 10 Hz swept | ± 0.01% nominal |
| Accuracy, Span ≥ 10 Hz FFT | ± 40% nominal |
| Accuracy, Span = 0 Hz | ± 0.01% nominal |
| Trigger sources | Free run, line, video, external 1, external 2, RF burst, periodic timer |
| Trigger delay resolution | 0.1 μs |
| Time Gating | |
| Gate methods | Gated LO; gated video; gated FFT |
| Gate length range (except FFT) | 100.0 ns to 5.0 s |
| Gate delay range | 0 to 100.0 s |
| Gate delay jitter | 33.3 ns p-p nominal |
| Resolution Bandwidth (RBW) | |
| Range (–3.01 dB bandwidth) | 1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz |
| Bandwidth accuracy (power), 1 Hz to 750 kHz | ± 1.0 % (± 0.044 dB) |
| Bandwidth accuracy (power), 820 kHz to 1.2 MHz (< 3.6 GHz CF) | ± 2.0 % (± 0.088 dB) |
| Selectivity (–60 dB/–3 dB) | 4.1:1 nominal |
| EMI bandwidth (CISPR compliant, Option EMC) | 200 Hz, 9 kHz, 120 kHz, 1 MHz |
| EMI bandwidth (MIL STD 461E compliant, Option EMC) | 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz |
| Sweep (trace) point range | 1 to 40001 |
| Analysis Bandwidth | |
| Maximum bandwidth (Option B40) | 40 MHz |
| Maximum bandwidth (Standard) | 25 MHz |
| Video Bandwidth (VBW) | |
| Range | 1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz, and wide open (labeled 50 MHz) |
| Accuracy | ± 6 % nominal |
| Amplitude Range | |
| Measurement range | Displayed average noise level (DANL) to +23 dBm |
| Input attenuator range, 10 Hz to 44 GHz (Standard) | 0 to 60 dB in 10 dB steps |
| Input attenuator range (Option FSA) | 0 to 60 dB in 2 dB steps |
| Electronic attenuator (Option EA3), range | 0 to 24 dB, 1 dB steps |
| Electronic attenuator (Option EA3), full range (mechanical + electronic) | 0 to 84 dB, 1 dB steps |
| Maximum Safe Input Level | |
| Average total power (with and without preamp) | +30 dBm (1 W) |
| Peak pulse power (< 10 μs pulse width, < 1 % duty cycle, input attenuation ≥ 30 dB) | +50 dBm (100 W) |
| DC volts (DC coupled) | ± 0.2 Vdc |
| DC volts (AC coupled) | ± 100 Vdc |
| Display Range | |
| Log scale | 0.1 to 1 dB/division in 0.1 dB steps; 1 to 20 dB/division in 1 dB steps (10 display divisions) |
| Linear scale | 10 divisions |
| Scale units | dBm, dBmV, dBμV, dBmA, dBμA, V, W, A |
| Frequency Response (Specification, 10 dB input attenuation, 20 to 30 °C, RF/MW Opt 503/507/513/526) | |
| 9 kHz to 10 MHz | ± 0.8 dB |
| 10 MHz to 3.6 GHz | ± 0.6 dB |
| 3.5 to 7.0 GHz | ± 2.0 dB |
| 7.0 to 13.6 GHz | ± 2.5 dB |
| 13.5 to 22.0 GHz | ± 3.0 dB |
| 22.0 to 26.5 GHz | ± 3.2 dB |
| Frequency Response (Specification, Millimeter-wave Opt 532/544) | |
| 9 kHz to 10 MHz | ± 0.6 dB |
| 10 to 50 MHz | ± 0.45 dB |
| 50 MHz to 3.6 GHz | ± 0.45 dB |
| 3.5 to 5.2 GHz | ± 1.7 dB |
| 5.2 to 8.4 GHz | ± 1.5 dB |
| 8.3 to 13.6 GHz | ± 2.0 dB |
| 13.5 to 17.1 GHz | ± 2.0 dB |
| 17.0 to 22.0 GHz | ± 2.0 dB |
| 22.0 to 26.5 GHz | ± 2.5 dB |
| 26.4 to 34.5 GHz | ± 2.5 dB |
| 34.4 to 44 GHz | ± 3.2 dB |
| Total Absolute Amplitude Accuracy (10 dB attenuation, 20 to 30 °C) | |
| At 50 MHz | ± 0.40 dB |
| At all frequencies | ± (0.40 dB + frequency response) |
| Input VSWR (≥ 10 dB input attenuation) | |
| 10 MHz to 3.6 GHz (Opt 503/507/513/526) | < 1.2:1 nominal |
| 3.6 to 26.5 GHz (Opt 503/507/513/526) | < 1.9:1 nominal |
| 10 MHz to 3.6 GHz (Opt 532/544) | 1.2:1 nominal |
| 3.6 to 26.5 GHz (Opt 532/544) | 1.5:1 nominal |
| 26.5 to 44 GHz (Opt 532/544) | < 1.8:1 nominal |
| Reference Level | |
| Range (Log scale) | –170 to +23 dBm in 0.01 dB steps |
| Range (Linear scale) | 707 pV to 3.16 V |
| Display scale fidelity (between –10 dBm and –80 dBm input mixer level) | ± 0.15 dB total |
| Trace detectors | Normal, peak, sample, negative peak, log power average, RMS average, voltage average |
| Preamplifier (Option P03/P07/P13/P26/P32/P44) | |
| Frequency range (Option P03) | 100 kHz to 3.6 GHz |
| Frequency range (Option P07) | 100 kHz to 7 GHz |
| Frequency range (Option P13) | 100 kHz to 13.6 GHz |
| Frequency range (Option P26) | 100 kHz to 26.5 GHz |
| Frequency range (Option P32) | 100 kHz to 32 GHz |
Important: Maximum safe input level: +30 dBm (1 W) average total power; peak pulse power +50 dBm (100 W) for <10 μs pulse width and <1% duty cycle with input attenuation ≥ 30 dB. DC volts: ±0.2 Vdc DC coupled, ±100 Vdc AC coupled.
Important: External mixing (Option EXM) is available only with the EXA millimeter-wave configurations, Option 532 or 544.
Important: If Auto Align is set to Light, performance is not warranted, and nominal performance will degrade to become a factor of 1.4 wider for any specification subject to alignment, such as amplitude tolerances.
Important: When Option MPB (microwave preselector bypass) is installed and enabled, some aspects of the analyzer performance change; refer to the EXA specification guide for details.
Usage tip: the rear-panel +28 V (pulsed) noise source drive is designed for use with Keysight SNS Series noise sources.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Keysight
Condition
Pre-Owned
Manufacturer
Keysight
Spec_ana_freq
10 Hz to 44 GHz
Keysight N9000B CXA Signal Analyzer, up to 26.5 GHz (Pre-Owned)
N9000B
Keysight N9020B MXA Signal Analyzer, up to 50 GHz (Pre-Owned)
N9020B
Keysight N9021B MXA Signal Analyzer, up to 50 GHz (Pre-Owned)
N9021B
Keysight N9030B PXA Signal Analyzer, up to 50 GHz (Pre-Owned)
N9030B
Keysight N9040B UXA Signal Analyzer, up to 50 GHz (Pre-Owned)
N9040B
Keysight N9041B UXA Signal Analyzer, up to 110 GHz (Pre-Owned)
N9041B
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
