The FLIR DM92 and DM93 are True RMS industrial digital multimeters featuring advanced variable frequency drive (VFD) filtering to accurately analyze non-traditional sine waves and noisy signals. They measure True RMS AC and DC voltage and current and present readings on a 40,000-count display with an analog bargraph and a bright white LED backlight.

These industrial multimeters are built for electrical testing where signal quality and lighting conditions are challenging. The VFD mode supports analysis of variable frequency drive signals, while LoZ mode eliminates ghost voltage error readings caused by long wires that share a conduit. Integrated LED worklights eliminate the need for a flashlight while performing tests in dim lighting.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois.

Brand Heritage

FLIR Systems, Inc., headquartered in Wilsonville, Oregon, was acquired by Teledyne Technologies in 2021, after which its products are marketed under the Teledyne FLIR name.

Compare Other Models in This Series

The FLIR DM92/DM93 family consists of two True RMS industrial digital multimeters that share the same core measurement platform: True RMS AC/DC voltage and current, a 40,000-count display with analog bargraph, VFD filtering mode, LoZ mode, LED worklights, and a double-molded IP54 housing rated to a 2 m drop test.

Both models carry a CAT IV-600V / CAT III-1000V category rating and offer the same measurement ranges and recording functions, including Min/Max/Average recording, Auto AC/DC voltage, Data Hold, Relative, Peak Hold, and storage of up to 99 readings. The DM93 extends the platform with wireless connectivity and expanded data recording.

Each new model below is its own dedicated product page with condition-matched pricing. Select the specific model and condition that fits your requirement; the comparison table that follows summarizes how the two models differ.

The DM93 is the connected variant of the family: it adds Data Record with wireless data transfer, integrated Bluetooth to the FLIR Tools Mobile app, and METERLiNK technology that embeds the meter's electrical readings into compatible FLIR infrared camera images. It also includes a Type K temperature probe (400°F, 204°C) and a magnetic hanging strap.

The two models differ in connectivity and recording. The DM92 provides the full True RMS measurement set with manual storage of up to 99 readings. The DM93 adds Bluetooth wireless transfer (32 ft / 10 m maximum range), Data Record for up to 20,000 points over a maximum of 125 days, and METERLiNK transfer to compatible FLIR infrared cameras.

Both models are also offered with a Certificate of Traceability to NIST as the DM92-NIST and DM93-NIST ordering options. The comparison table that follows details the measurement ranges, accuracy figures, and model-specific features for each.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• CAT IV Silicone Test Leads
• 6 AAA Batteries
• User Manual/CD
• Limited Lifetime Warranty
• Type K Temperature Probe (400°F, 204°C)
• Magnetic Hanging Strap

Product Core & Specifications

Important: Category Rating: CAT IV-600V, CAT III-1000V.

Important: Limited Lifetime Warranty applies only when the product is registered within 60 days of purchase.

Recommended pairing: the TA10 protective case for the DM9x and IM7x Series, or the TA80 CAT IV silicone test leads listed for the series.

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.