Chat Live
Contact Us
sales@valuetronics.com
The Com-Power LI-3P-1x Series is a family of three-phase Line Impedance Stabilization Networks (LISNs) designed for power line conducted emissions compliance testing. The series consists of four models — the LI-3P-116, LI-3P-132, LI-3P-163, and LI-3P-1100 — which share the same 150 kHz to 30 MHz frequency range and 50Ω/50 μH four-conductor network topology, differing primarily in their per-line continuous current ratings of 16, 32, 63, and 100 amperes respectively.
These LISNs provide the measurement platform required for power line conducted emissions compliance testing under most worldwide commercial product standards. During the measurement, the LISN provides a defined, stable impedance across the measurement frequency range, isolates the equipment under test (EUT) and measurement circuit from the power source to minimize its influence on results, and couples the disturbance voltages to the coaxial measurement port that connects to the measuring instrument.
The LI-3P-1x Series comprises four three-phase Line Impedance Stabilization Networks sharing a common 150 kHz to 30 MHz frequency range, a 50Ω/50 μH four-conductor network topology, and full compliance with CISPR 16-1-2 and ANSI C63.4. All four models support both three-phase Delta and Wye power configurations and use air-core inductors to prevent saturation and permeability variation.
The models differentiate primarily by per-line continuous current capacity: 16 amperes (LI-3P-116), 32 amperes (LI-3P-132), 63 amperes (LI-3P-163), and 100 amperes (LI-3P-1100). The higher-current LI-3P-163 and LI-3P-1100 models additionally incorporate two user-controlled internal cooling fans operated by a switch on the rear panel, and ship with a 15 VDC adapter to power them.
Each new model in the LI-3P-1x Series is offered on its own dedicated product page with condition-matched pricing. Use the comparison table below to identify the per-line current rating, physical dimensions, and weight that match your installation, then navigate to the specific model page for ordering details.
The four models share identical RF performance characteristics — insertion loss below 0.7 dB, isolation greater than 40 dB, 150 kHz to 30 MHz range — and identical maximum voltage ratings of 500 Vrms line-to-line, 288 Vrms line-to-ground, and 705 V DC. The differences are mechanical and thermal: per-line current capacity, the Schneider Electric power input and output connector part numbers (which scale with current rating), chassis dimensions, weight, and the presence of forced-air cooling on the LI-3P-163 and LI-3P-1100.
The LI-3P-116 and LI-3P-132 use louvered side panels for passive cooling. The LI-3P-163 and LI-3P-1100 add two user-controlled internal cooling fans drawing through 4.5" circular intake openings on the rear panel and exhausting through two 4" square outlets on the top cover, both protected against debris. Weights range from 27.5 lbs (LI-3P-116) to 71.5 lbs (LI-3P-1100). See the comparison table for full per-model dimensions and connector references.
| Model | Max Current (per line) | Frequency Range | Weight |
|---|---|---|---|
| LI-3P-1100 | 100 Amperes (per line, continuous) | 150 kHz to 30 MHz | 71.5 lbs. (32.4 kg) |
| LI-3P-116 | 16 Amperes (per line, continuous) | 150 kHz to 30 MHz | 27.5 lbs. (12.5 kg) |
| LI-3P-132 | 32 Amperes (per line, continuous) | 150 kHz to 30 MHz | 30 lbs. (13.6 kg) |
| LI-3P-163 | 63 Amperes (per line, continuous) | 150 kHz to 30 MHz | 52.5 lbs. (23.8 kg) |
Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.
| Specification | LI-3P-116 | LI-3P-132 | LI-3P-163 | LI-3P-1100 |
|---|---|---|---|---|
| GENERAL | ||||
| Products Description | Line Impedance Stabilization Network (LISN) | |||
| Application | Power Line Conducted Emissions Tests | |||
| Standards | ANSI C63.4, CISPR 16-1-2 | |||
| Type | 50Ω / 50 µH, (4) Conductor Network | |||
| Frequency Range | 150 kHz to 30 MHz | |||
| Insertion Loss (Voltage Division Factor) | <0.7 dB | |||
| Isolation | >40 dB | |||
| INPUT POWER RATINGS FOR EQUIPMENT UNDER TEST (EUT) | ||||
| Current (maximum continuous, per line) | 16 Amperes | 32 Amperes | 63 Amperes | 100 Amperes |
| AC Voltage (maximum) | 500 Volts rms (line to line), 288 Volts rms (line to ground) | |||
| DC Voltage (maximum) | 705 Volts DC | |||
| ELECTRICAL | ||||
| Remote Interface Power Inputs | 6 Volts DC (unregulated), 500 mA (LISN and RLI-100 Remote LISN Interface) | |||
| Cooling Fans Power Input | Not Applicable | 15 Volts DC (unregulated), 500 mA | ||
| INPUT/OUTPUT CONNECTORS | ||||
| Power Input Port Plug (affixed to LISN chassis) | Schneider Electric P/N: 83862 | Schneider Electric P/N: 83874 | Schneider Electric P/N: 81886 | Schneider Electric P/N: 81898 |
| Power Input Socket (for power input cable) | Schneider Electric P/N: PKF16M745 | Schneider Electric P/N: PKF32M745 | Schneider Electric P/N: 81486 | Schneider Electric P/N: 81498 |
| Power Output Port Socket (affixed to LISN chassis) | Schneider Electric P/N: PKF16F745 | Schneider Electric P/N: PKF32F745 | Schneider Electric P/N: 81286 | Schneider Electric P/N: 81298 |
| Power Output Port Plug (for EUT power cable) | Schneider Electric P/N: PKE16M745 | Schneider Electric P/N: PKE32M745 | Schneider Electric P/N: 81386 | Schneider Electric P/N: 81398 |
| RF Measurement Port | 50Ω - N-Type (female) | |||
| Fiber Optic Ports | Avago Duplex Latching POF Jack (LISN and RLI-100 Remote LISN Interface) | |||
| Remote Interface Power Input Ports | 5.5/2.5 mm Power Jack (LISN and RLI-100 Remote LISN Interface) | |||
| Cooling Fans Power Input Port | Not Applicable | 5.5/2.1 mm Power Jack | ||
| DIMENSIONS & WEIGHT | ||||
| Dimension A | 24.4" (62 cm) | 24.8" (63 cm) | 38.7" (98.4 cm) | 43.5" (110.5 cm) |
| Dimension B | 19.3" (49 cm) | 19.7" (50 cm) | 24.9" (63.2 cm) | 25.7" (65.3 cm) |
| Dimension C | 15.8" (40.2 cm) | 15.8" (40.2 cm) | 20.9" (53 cm) | 20.9" (53 cm) |
| Dimension D | 13.8" (35.1 cm) | 13.8" (35.1 cm) | 18.8" (47.7 cm) | 18.8" (47.7 cm) |
| Dimension E | 12.2" (31 cm) | 12.2" (31 cm) | 15.9" (40.5 cm) | 15.9" (40.5 cm) |
| Dimension F | 13.9" (35.4 cm) | 13.9" (35.4 cm) | 15.9" (40.5 cm) | 15.9" (40.5 cm) |
| Dimension G | 6.1" (15.5 cm) | 6.8" (17.3 cm) | 10.4" (26.5 cm) | 12.8" (32.5 cm) |
| Dimension H | 3.8" (9.6 cm) | 4.1" (10.4 cm) | 4.3" (11 cm) | 5.2" (13.1 cm) |
| Dimension I | 5.6" (14.2 cm) | 6.3" (16 cm) | 10.4" (26.5 cm) | 12.8" (32.5 cm) |
| Dimension J | 3.5" (8.9 cm) | 4" (10.2 cm) | 4.3" (11 cm) | 5.2" (13.1 cm) |
| Weight (including input/output connectors) | 27.5 lbs. (12.5 kg) | 30 lbs. (13.6 kg) | 52.5 lbs. (23.8 kg) | 71.5 lbs. (32.4 kg) |
| ENVIRONMENTAL | ||||
| Operating Temperature | 40°F to 104°F (5°C to 40°C) | |||
| Cooling | Louvered Side Panels (no forced air) | Louvered Side Panels; Forced Air by (2) user-controlled, internal fans with (2) 4.5" circular intake openings on rear panel (each opening protected by a circular metal finger guard); (2) 4" square air outlets located on the top cover (each opening protected by metallic mesh) |
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Com-Power
Condition
New
Manufacturer
Com-Power
Current
100 A
Frequency
30 MHz
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
