Chat Live
Contact Us
sales@valuetronics.com
The Agilent N5247A is a PNA-X microwave network analyzer covering 10 MHz to 67 GHz, offered in both 2-port and 4-port configurations. It measures the magnitude and phase of a device's S-parameters — its reflection and transmission characteristics — across the specified frequency range, presenting the results on an integrated color display.
Across its option set the analyzer performs reflection and transmission S-parameter measurements as well as group delay measurements. With Option 029 it adds hardware and firmware for high-accuracy noise figure measurements, and its internal receiver gates support point-in-pulse and pulse-profile measurements. Source and receiver behavior is characterized in detail through corrected and uncorrected system performance, dynamic range, harmonic, phase noise, and dynamic accuracy specifications.
ValueTronics stocks and holds its own inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.
Agilent Technologies was established in 1999 as a spin-off from Hewlett-Packard, taking on its test and measurement business. In 2014, that test and measurement division was renamed Keysight Technologies.
The N5247A PNA-X is offered as a 2-port or 4-port microwave network analyzer covering 10 MHz to 67 GHz, configured through a family of test-set options. The 2-port path is built around Options 200, 219, and 224, while the 4-port path uses Options 400, 419, and 423.
Each configuration shares the same core frequency range, 1.85 mm test ports, and control interfaces, but differs in port count, available power range, and added source and switching hardware. The comparison below maps those configuration differences.
Each model and option configuration linked below is its own dedicated product page with condition-matched pricing. Select the pre-owned listing that matches the port count, options, and condition your application requires.
Within the PNA-X line, the N5247A is specified to 67 GHz with 1.85 mm test port connectors, with typical performance shown to 70 GHz where available.
The primary configuration differences are port count and added hardware. Options 200 and 400 are the standard 2-port and 4-port test sets with base power range; Options 219 and 419 add extended power range with source and receiver attenuators and bias-tees; and Options 224 and 423 add an internal second source, combiner, and mechanical switches.
Option 029 is a separate addition that provides hardware and firmware for high-accuracy noise figure measurements and requires Option 224 or 423. Refer to the comparison table for the per-configuration option requirements and dependencies.
| Model | Frequency Range | Ports | Max Settable Power |
|---|---|---|---|
| N5247A | 10 MHz to 67 GHz | 2 | 30 dBm |
Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.
| Specification | Value |
|---|---|
| Frequency Information, All Options | |
| Frequency Range | 10 MHz to 67 GHz (specification); 67 GHz to 70 GHz (typical) |
| Frequency Resolution | 1 Hz |
| Frequency Accuracy | ±1 ppm |
| Frequency Stability | ±0.05 ppm, -10° to 70° C (typical); ±0.1 ppm/yr maximum |
| Source Power (Tables 12, 13) | |
| Power Resolution | 0.01 dB |
| Maximum Settable Power | 30 dBm (typical) |
| Minimum Settable Power (Options 200, 400) | -30 dBm |
| Minimum Settable Power (Options 219, 419, 224, 423) | -80 dBm |
| Preset (Nominal) Power (Options 200, 400) | 0 dBm |
| Preset (Nominal) Power (Options 219, 419, 224, 423) | -5 dBm |
| 2nd and 3rd Harmonics at Max Specified Power (dBc), All Options - Typical | |
| 10 MHz to 2 GHz, Ports 1,3 / Source 2 Out 1 | -51 dBc |
| 10 MHz to 2 GHz, Port 2,4 / Source 2 Out 2 | -13 dBc |
| 2 GHz to 13.5 GHz, Ports 1,3 / Source 2 Out 1 | -60 dBc |
| 2 GHz to 13.5 GHz, Port 2,4 / Source 2 Out 2 | -21 dBc |
| 13.5 GHz to 70 GHz, Ports 1,3 / Source 2 Out 1 | -60 dBc |
| 13.5 GHz to 70 GHz, Port 2,4 / Source 2 Out 2 | -60 dBc |
| Non-Harmonic Spurs at Nominal Power (dBc), All Options, All Ports - Typical (8 kHz / 100 kHz offset Frac-N) | |
| 10 MHz to 500 MHz | -50 / -50 |
| 500 MHz to 2 GHz | -60 / -42 |
| 2 GHz to 4 GHz | -57 / -45 |
| 4 GHz to 8 GHz | -51 / -39 |
| 8 GHz to 16 GHz | -45 / -33 |
| 16 GHz to 48 GHz | -39 / -27 |
| 48 GHz to 64 GHz | -33 / -21 |
| 64 GHz to 70 GHz | -27 / -15 |
| Phase Noise (dBc/Hz), All Options, All Ports - Typical (1 kHz / 10 kHz / 100 kHz / 1 MHz offset) | |
| 10 MHz to 500 MHz | -100 / -95 / -95 / -120 |
| 500 MHz to 1 GHz | -107 / -117 / -112 / -127 |
| 1 GHz to 2 GHz | -101 / -111 / -106 / -121 |
| 2 GHz to 4 GHz | -95 / -105 / -100 / -115 |
| 4 GHz to 8 GHz | -89 / -99 / -94 / -109 |
| 8 GHz to 16 GHz | -83 / -93 / -88 / -103 |
| 16 GHz to 32 GHz | -77 / -87 / -82 / -97 |
| 32 GHz to 64 GHz | -71 / -81 / -76 / -91 |
| 64 GHz to 70 GHz | -65 / -75 / -70 / -85 |
| Noise Floor (dBm) @ 10 Hz IFBW, Test Port, All Ports, All Options - Specification | |
| 10 MHz to 50 MHz | -70 |
| 50 MHz to 100 MHz | -92 |
| 100 MHz to 500 MHz | -100 |
| 500 MHz to 1 GHz | -110 |
| 1 GHz to 10 GHz | -115 |
| 10 GHz to 13.5 GHz | -116 |
| 13.5 GHz to 16 GHz | -117 |
| 16 GHz to 26.5 GHz | -118 |
| 26.5 GHz to 35 GHz | -106 |
| 35 GHz to 40 GHz | -105 |
| 40 GHz to 50 GHz | -102 |
| 50 GHz to 60 GHz | -101 |
| 60 GHz to 67 GHz | -100 |
| Test Port Compression at 0.1 dB (dBm), All Options, All Ports - Typical | |
| 10 MHz to 10 GHz | 15 |
| 10 GHz to 30 GHz | 12 |
| 30 GHz to 67 GHz | 11 |
| Reference Level - Specification | |
| Range | ±500 (Magnitude, dB); ±500 (Phase, degree) |
| Resolution | 0.001 (Magnitude, dB); 0.01 (Phase, degree) |
| Damage Input Level - Specification | |
| Test Ports 1, 2, 3, 4 (All Options) | > +24 dBm RF; 40 V DC |
| Source 2 Out 1, Source 2 Out 2 (Option 224 only) | > +24 dBm RF; 0 V DC |
| Test Port 1, Noise Mode (Option 029 only) | > +10 dBm RF; 40 V DC |
| Test Port 2, Noise Mode (Option 029 only) | > +27 dBm RF; 40 V DC |
| Miscellaneous Information | |
| System IF Bandwidth Range | 1 Hz to 15 MHz (7 MHz, 10 MHz, and 15 MHz IFBWs available ONLY with FW A.09.42 and later, and with DSP version 5) |
| CPU | Intel 2.0 GHz Core i7 |
| LXI | Class C |
| Front Panel Information, All Options | |
| Test Ports | 1.85 mm (male), 50 ohm (nominal), 0.002 in. Center Pin Recession (characteristic) |
| Jumpers | 1.85 mm (female) connectors with 1.85 mm (male) jumper cables |
| USB 2.0 Ports | Master (4 ports), USB Type-A female, compatible with USB 2.0 |
| Display Size | 26.3 cm (10.4 in) diagonal color active matrix LCD; 1024 (horizontal) X 768 (vertical) resolution |
| Rear Panel Information, All Options | |
| 10 MHz Reference In | BNC female; 10 MHz ±10 ppm; Input Level -15 dBm to +20 dBm; Input Impedance 200 Ω nom. |
| 10 MHz Reference Out | BNC female; 10 MHz ±1 ppm; Sine Wave; +10 dBm ±4 dB into 50 Ω; Output Impedance 50 Ω nominal |
| LAN | 10/100BaseT Ethernet, 8-pin configuration; auto selects between the two data rates |
| GPIB | Two ports - dedicated controller and dedicated talker/listener; 24-pin D-sub (Type D-24), female; compatible with IEEE-488 |
| Line Power (Frequency, Voltage) | 50/60/400 Hz for 100 to 120 VAC; 50/60 Hz for 220 to 240 VAC; auto switching |
| Line Power (Max) | 450 watts |
| Analyzer Dimensions and Weight (Table 34) | |
| Height (without bottom feet, EIA RU = 6) | 266.1 mm (10.5 in) |
| Height (with bottom feet) | 280.0 mm (11.0 in) |
| Width (without handles or rack-mount flanges) | 425.9 mm (16.8 in) |
Important: Maximum (damage) input level at test ports 1–4: greater than +24 dBm RF and 40 V DC (all options).
Important: All specifications and characteristics apply over a 25 °C ±5 °C range (unless otherwise stated) and 90 minutes after the instrument has been turned on.
Important: Typical performance information between 67 GHz and 70 GHz is shown where available; performance is degraded at particular frequencies in this range due to the modes of the 1.85 mm connectors used in the analyzer, test port cables and adapters.
Important: Option configuration requirements: Option 219 requires Option 200; Option 224 requires Options 200, 219, and 080; Option 419 requires Option 400; Option 423 requires Options 400, 419, and 080; Option 029 (high-accuracy noise figure) requires one of Option 224 or 423.
Important: Corrected system performance and full 2-port calibration specifications apply when used with the 85058B (1.85 mm) calibration kit (or N4694A 2-Port ECal module) and the N4697F flexible test port cable set; these calibration items are documented in this datasheet as part of the measurement setup.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Agilent
Condition
Pre-Owned
Manufacturer
Agilent Technologies
Net_ana_freq
10 MHz to 67 GHz
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
