# Teledyne Test Tools T3PS36006 Multiple Output Dual Range DC Power Supply # Teledyne Test Tools T3PS36006 Multiple Output Dual Range DC Power Supply ## Key Features At A Glance - Three independent, isolated outputs — CH1/CH2 dual-range plus a separate CH3 - CH1/CH2 dual output range: 30 V / 6 A or 60 V / 3 A per channel - Series and parallel tracking for combined 30 V/12 A, 60 V/6 A, or 120 V/3 A output - CH3 adjustable output: 0.1–5 V / 3 A - 375 W output capacity in a compact 255 x 145 x 265 mm chassis, approx. 6 kg - Switched-mode high-efficiency design with low fan noise (<50 dB) and automatic fan speed control - OVP protects the DUT; OTP protects the supply; reverse-polarity and CH3 overload protection - Automatic AC 115 V / 230 V source switching; remote output On/Off control (not programmable) A DC power supply delivers controlled, adjustable voltage and current to a device under test, providing the clean, stable power a circuit needs while the engineer sets and reads the operating point. The Teledyne Test Tools T3PS36006 is a triple-output, dual-range bench DC power supply rated for up to 120 V, up to 12 A, and up to 375 W of output capacity. It combines three isolated outputs, switched-mode high-efficiency conversion, low noise, and thorough protection in a compact, lightweight package. The T3PS36006 is built to satisfy mainstream bench power demands across a wide range of applications. CH1 and CH2 each offer a dual output range — 30 V / 6 A or 60 V / 3 A — so a single unit can accommodate either higher-current or higher-voltage work without a second supply. Optional voltage/current protection knobs lock the output at a fixed level, which is useful for automated testing at fixed output levels such as assembly lines or product inspections. ValueTronics stocks and holds its own inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. That combination lets us match the right T3PS36006 to your bench with confidence in both its condition and its availability. ## Brand Heritage The instrument carries the Teledyne Test Tools brand, abbreviated "T3," which is the test-equipment line of Teledyne LeCroy. LeCroy was founded in 1964 and became Teledyne LeCroy following its acquisition by Teledyne Technologies in 2012. ## Accessories Supplied - Quick Start Guide x 1 - Power Cord x 3 - Test lead GTL-104 A x 2 - GTL-105 A x 1 ## Product Core & Specifications Specification Value Output Ratings CH1/CH2 Independent 0 ~ 30 V / 0 ~ 6 A ; 0 ~ 60 V / 0 ~ 3 A CH1/CH2 Series 0 ~ 60 V / 0 ~ 6 A ; 0 ~ 120 V / 0 ~ 3 A CH1/CH2 Parallel 0 ~ 30 V / 0 ~ 12 A ; 0 ~ 60 V / 0 ~ 6 A CH3 0.1 ~ 5 V / 3 A Voltage Regulation Line ≤0.01 % + 3 mV Load ≤0.01 % + 5 mV (rating current ≤ 6 A); ≤0.01 % + 8 mV (rating current ≤ 12 A) Ripple & Noise ≤5 mVrms (5 Hz ~ 1 MHz); ≤50 mVpp (20 Hz ~ 20 MHz) Recovery Time ≤100 µs (50 % load change, minimum load 0.5 A) Current Regulation Line ≤0.2 % + 3 mA Load ≤0.2 % + 3 mA Ripple & Noise ≤3 mArms Tracking Operation Tracking Error ≤0.5 % + 10 mV of master Series Regulation ≤300 mV Ripple & Noise ≤10 mVrms (5 Hz ~ 1 MHz); ≤100 mVpp (20 Hz ~ 20 MHz) Output On/Off Response Time Voltage Up (10 % ~ 90 %) ≤100 ms (≤95 % rating load) Voltage Down (90 % ~ 10 %) ≤100 ms (≥10 % rating load) OVP Accuracy ±(0.5 % of reading + 0.5 V) Meter Type 3½ digit 0.5" LED display Accuracy ±(0.5 % of reading + 2 digits) Resolution 100 mV / 10 mA Insulation Chassis & Terminal 100 MΩ or above (DC 1000 V) Chassis & AC code 100 MΩ or above (DC 1000 V) Temperature Coefficient Voltage ≤100 ppm/°C + 3 mV Current ≤150 ppm/°C + 3 mA Remote Control Output On/Off Output On/Off General Fan Noise ≤50 dB Operation Environment Ambient temperature 0 ~ 40 °C; Relative humidity ≤80 % Storage Environment Ambient temperature –10 ~ 70 °C; Relative humidity ≤70 % Power Source AC 115 V / 230 V ±15 %, 50/60 Hz Dimension & Weight 255 (W) x 145 (H) x 265 (D) mm; Approx. 6 kg > **Important:** Remote Output On/Off control is provided but is not programmable. ## About this New unit This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order. ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 1595.0 USD - **Vendor:** Teledyne Test Tools - **Type:** Dc Supply - **Tags:** DC Power Supply, Manufacturers, Power Supplies & Loads, product_manual_group_3, Product_new, Teledyne LeCroy ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 1595.00 USD | In stock | ## Images - T3PS36006 Teledyne LeCroy DC Power Supply --- > Source: [ValueTronics](https://valuetronics.com/products/t3ps36006-teledyne-lecroy-dc-power-supply-new) > Updated: 2026-06-27