# Teledyne Test Tools T3PS3000 Programmable DC Power Supply # Teledyne Test Tools T3PS3000 Programmable DC Power Supply ## Key Features At A Glance - Three isolated outputs: two 0–32 V / 3.2 A channels plus a selectable 2.5 / 3.3 / 5 V, 3.2 A channel - Series, parallel, and independent output modes combine the two main channels for up to 64 V or 6.4 A - 220 W total maximum output power across the three outputs - 5-digit voltage and 4-digit current display with 1 mV / 1 mA minimum resolution - USB Device and LAN interfaces with SCPI and LabVIEW driver support for automated test systems - 4.3-inch color TFT-LCD (480 x 272) with graphical waveform and timing-setting display - Intelligent temperature-controlled cooling fan reduces fan speed and noise at low load The Teledyne Test Tools T3PS3000 is a linear programmable DC power supply built around a 4.3-inch color TFT-LCD display. It provides three isolated outputs — two adjustable channels rated 0–32 V at up to 3.2 A and a third output selectable to 2.5 V, 3.3 V, or 5 V at 3.2 A — with output short and overload protection on each channel and a combined maximum output of 220 W. A programmable DC power supply delivers regulated, controllable voltage and current to a device under test and lets that output be set and read back from the front panel or a remote interface. The T3PS3000 is aimed at education, production, and design and development use, where a single instrument that covers a range of output configurations is valuable. ValueTronics stocks and holds its own inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. ## Brand Heritage Teledyne Test Tools is the test-equipment brand of Teledyne LeCroy, a company whose oscilloscope and measurement heritage dates to its founding in 1964. LeCroy Corporation became part of Teledyne Technologies in 2012, after which the combined operation has traded as Teledyne LeCroy. ## Accessories Supplied - USB Cable - Quick Start - Calibration Certificate - Power cord - Output Test Cord - 2 Sets ## Product Core & Specifications Specification Value Channel CH1 output voltage 0 ~ 32 V, output current: 0 ~ 3.2 A CH2 output voltage 0 ~ 32 V, output current: 0 ~ 3.2 A CH3 output voltage 2.5 / 3.3 / 5.0 V, output current: 3.2 A Display Display 4.3 inch color TFT-LCD Digits 5 digits voltage, 4 digits current Resolution 1 mV / 1 mA Accuracy Program Accuracy, Voltage ± (0.03 % of reading + 10 mV) Program Accuracy, Current ± (0.3 % of reading + 10 mA) Readback Accuracy, Voltage ± (0.03 % of reading + 10 mV) Readback Accuracy, Current ± (0.3 % of reading + 10 mA) Constant Voltage Mode Line Regulation ≤0.01% + 3 mV Load Regulation ≤0.01% + 3 mV Ripple & Noise ≤1 mVrms (5 Hz ~ 1 MHz) Recovery Time < 50 µs (50 % load change, minimum load 0.5 A) Constant Current Mode Line Regulation ≤0.2 % + 3 mA Load Regulation ≤0.2 % + 3 mA Ripple & Noise ≤3 mArms Parallel Mode Line Regulation ≤0.01% + 3 mV Load Regulation ≤0.01% + 3 mV Series Mode Line Regulation ≤0.01% + 5 mV Load Regulation ≤300 mV CH3 Output Voltage (2.5 / 3.3 / 5 V) ± 8 % Line Regulation ≤0.01% + 3 mV Load Regulation ≤0.01% + 3 mV Ripple & Noise ≤1 mVrms (5 Hz ~ 1 MHz) General Locking Key Yes Memory Save / Recall 5 Sets Max Output Power 220 W Power Source AC 100 V / 120 V / 220 V / 230 V ± 10% 50/60 Hz Standard Configuration Interface USB Device, LAN Remote Control SCPI, LabView Driver Insulation Case to Terminal ≥20 MΩ (DC 500 V); Case to AC line ≥30 MΩ (DC 500 V) Environmental Operating Temperature 0 °C to +40 °C Storage Temperature \-10 °C to +70 °C Humidity 5% to 90% relative humidity (non-condensing) up to +30 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C Operating Altitude 2000 m (Max) Usage Indoor Use only Pollution Degree Pollution Degree 2 (per IEC61010-1:2010) Physical Dimension 225 (W) × 143 (H) × 278 (D) mm Weight ≈8.0 kg > **Important:** Maximum total output power is 220 W across the three outputs. ## About this New unit This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order. ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 1080.0 USD - **Vendor:** Teledyne Test Tools - **Type:** Dc Supply - **Tags:** DC Power Supply, Manufacturers, Power Supplies & Loads, product_manual_group_3, Product_new, Teledyne LeCroy ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 1080.00 USD | In stock | ## Images - T3PS3000 Teledyne LeCroy DC Power Supply --- > Source: [ValueTronics](https://valuetronics.com/products/t3ps3000-teledyne-lecroy-dc-power-supply-new) > Updated: 2026-06-27