# B&K Precision PVS10005 1000V/5A 5000W High Power Programmable DC Power Supply (Pre-Owned) # B&K Precision PVS10005 1000V/5A 5000W High Power Programmable DC Power Supply (Pre-Owned) ## Key Features At A Glance - Output spans 600 V/8.5 A to 1000 V/5 A across the series, up to 5.1 kW in a 2U package. - Single-phase AC input (170–265 VAC, 47–63 Hz), easier to wire than 3-phase 5 kW supplies. - Standard USB (virtual COM), RS-232, RS-485, GPIB, and LAN interfaces with SCPI support for ATE integration. - External analog programming and monitoring interface for voltage, current, and fault status. - Built-in SAS function stores up to 16 I-V curves (Voc, Isc, Vmp, Imp) with a 1024-point table. - List mode: 9 user-defined programs of up to 100 steps each; transient response ≤0.5 ms. - Protection: OVP, OCP, OPP, OTP, foldback mode, and key-lock; front-to-rear airflow cooling. - Master/slave parallel operation and multi-unit control of up to 30 supplies via RS-485. The B&K Precision PVS Series comprises high power programmable DC power supplies — the PVS10005, PVS60085, and PVS60085MR — delivering clean output power up to 5.1 kW with excellent regulation and fast transient response in an industry-leading 2U package. The series pairs high programming resolution with multiple remote interfaces for test systems and a built-in SAS (solar array simulator) function for generating photovoltaic I-V curves, serving both benchtop operators and system integrators. These supplies are well suited for both bench use and ATE systems integration, spanning R&D, design verification, production test, and high voltage testing. Their low-noise characteristic makes them suited to motor inverter testing, and when operated with the optional SAS software they support solar array testing applications such as validating a solar inverter's MPPT algorithm and testing to EN50530 and Sandia Labs standards. ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, so the instrument you order is on hand and ready to ship. Every pre-owned unit is inspected and functionally verified in-house before it leaves our facility, while new units ship factory-sealed exactly as received from the manufacturer. That combination of held inventory and verified used stock lets engineers source the right configuration with confidence. ## Compare Other Models in This Series The PVS Series brings together three high power programmable DC power supplies — the PVS10005, PVS60085, and PVS60085MR — that share a common 2U architecture, single-phase AC input, and full standard interface set while differing in their output ratings. All three deliver clean output power with excellent regulation, fast transient response, a built-in solar array simulator function, and the same protection and remote-control feature set. Choosing within the family comes down to the voltage, current, and power envelope your application requires: the series offers a 1000 V tier and a 600 V tier, with one of the 600 V models available as a multi-ranging supply. Each model below links to its own product page where its exact ratings and condition-matched pricing are shown. Each pre-owned model below is its own dedicated product page with condition-matched pricing. Select the model whose output ratings fit your application, then review its page for current availability and pricing in the condition you need. The models differ primarily in output ratings. The PVS10005 provides 0–1000 V and 0–5 A with 5000 W maximum output power, while the PVS60085 provides 0–600 V and 0–8.5 A with 5100 W maximum output power. The PVS60085MR shares the 600 V / 8.5 A ratings but is a multi-ranging supply, allowing any combination of rated voltage and current up to a 3000 W maximum output power. Voltage and current resolution is 0.1 V / 0.1 mA on the PVS10005 and 10 mV / 0.2 mA on both 600 V models. Other specifications track these tiers, including maximum rated input power (5800 VA for the PVS10005 and PVS60085, 3500 VA for the PVS60085MR), OVP adjustment range, and rise/fall times. See the comparison table for the per-model values of output rating, regulation, resolution, accuracy, and rated input power. Model Max Output Voltage Max Output Current Max Output Power **PVS10005** 1000 V 5 A 5000 W PVS60085 600 V 8.5 A 5100 W PVS60085MR 600 V 8.5 A 3000 W Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - Power cord - Test report - Certificate of calibration ## Product Core & Specifications Specification Value Output Rating Output Voltage (1) 0 - 1000 V Output Current (2) 0 - 5 A Max. Output Power 5000 W Line Regulation Voltage 100 mV Current 2.5 mA Load Regulation Voltage 100 mV Current 5 mA Ripple and Noise (20 Hz - 20 MHz) Voltage ≤100 mVrms / ≤600 mVpp Current 10 mA Resolution Programming 0.1 V / 0.1 mA Readback 0.1 V / 0.1 mA Programming Accuracy Voltage 700 mV Current (3) ± (%output + offset) 0.03% + 2 mA Readback Accuracy ± (%output + offset) Voltage 0.05% + 500 mV Current (3) 0.1% + 5 mA General Transient Response Time (4) ≤0.5 ms OVP adjustment Range 5 - 1100 V OVP Accuracy 10 V OCP Accuracy 50 mA Command Response Time 20 ms Efficiency (5) 90% Power Factor 0.99 Remote Sense Compensation 10 V Rising Time at Full Load ≤250 ms Rising Time at No Load ≤250 ms Falling Time at Full Load ≤250 ms Falling Time at No Load ≤5000 ms Standard Interfaces Analog Programming, USB, RS485, RS232, GPIB, and Ethernet AC Input (6) AC Input 170 - 265 VAC single phase Rated Frequency 47 - 63 Hz Maximum Rated Input Power 5800 VA Temperature Ratings Operation 0 °C ~ 40 °C Storage \-40 °C ~ 85 °C General Physical Dimensions (W × H × D) 16.53" x 3.46" x 20.94" (420 x 88 x 532 mm) Weight 32.18 lbs (14.6 kg) Warranty Three-Year Warranty > **Important:** Output is de-rated by 10% when operating below 190 VAC. > **Important:** Solar Array Simulation (SAS) software is an optional accessory (SASPVS) and is not included with the base unit; it is required to consistently reproduce I-V curves and test a PV inverter's MPPT efficiency. > **Important:** Current accuracy specification applies when output power > 0.1% of full power. > **Important:** Minimum voltage is guaranteed to 5 V; minimum current is guaranteed to a maximum of 0.4% of rated output current. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 4840.0 USD - **Vendor:** B&K Precision - **Type:** Dc Supply - **Tags:** BK Precision, DC Power Supply, Manufacturers, Power Supplies & Loads, product_manual_group_2, Product_used ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 4840.00 USD | In stock | ## Images - B&K Precision PVS10005 1000V/5A 5000W High Power Programmable DC Power Supply (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/pvs10005-b-k-precision-dc-power-supply-used) > Updated: 2026-06-20