# Agilent N6702A Low-Profile Modular Power System Mainframe, 1200 W (Pre-Owned) # Agilent N6702A Low-Profile Modular Power System Mainframe, 1200 W (Pre-Owned) ## Key Features At A Glance - 1U-high modular mainframe holds one to four DC power modules for up to four outputs in a single rack unit, with side-only venting so instruments can mount directly above or below - Mix and match from over 30 DC power modules spanning 20 W to 500 W ratings and output voltages from 0-5 V up to 0-150 V - Five module classes: DC Power, High-Performance autoranging, Precision, Source/Measure Unit, and application-specific modules - GPIB, USB 2.0, and 10/100 Base-T Ethernet LAN standard; fully compliant to the LXI Class C specification - Built-in voltage and current measurement standard on every module to simplify ATE wiring - Per-module over-voltage, over-current, and over-temperature protection with 10 µs cross-module fault detection - Mainframes available in 400 W, 600 W, and 1200 W total-output-power tiers - Universal 100–240 VAC input (50/60/400 Hz) with power factor correction - Command processing time of ≤1 ms; SCPI programming with VXIplug&play and IVI-COM drivers; monitor, control, and setup from any standard web browser - Programmable voltage slew, output sequencing, and series/parallel virtual-channel operation - Optional High-Speed Test Extensions add arb-waveform and digitizer-style capture; optional output disconnect (option 761) and output disconnect/polarity reversal (option 760) relays built into modules - N6705 DC Power Analyzer mainframe adds front-panel scope view, arbitrary waveform generation, and data logging The Agilent N6700 is a low-profile Modular Power System (MPS) — a 1U-high, multiple-output programmable DC power supply system that lets test system integrators optimize performance, power, and price to match their test needs. Built on an advanced switching power supply design that fits within 1U of rack space, a single mainframe holds one to four DC power modules, and the system lets you mix and match from over 30 different DC power modules to create a 1- to 4-channel DC power system tailored to specific test requirements. Test system engineers can invest in high-performance outputs where speed and accuracy are needed, or choose basic performance outputs for simple DC power requirements. The N6700 MPS is designed for automatic test equipment (ATE) systems in R&D, design validation, and manufacturing. Power supplies of this kind are a fundamental component of test systems across aerospace and defense, consumer electronics, computers and peripherals, communications, semiconductor, and automotive electronics — industries where complex ATE systems often require multiple power sources and where reducing occupied rack space and increasing test throughput are constant pressures. Within the family, precision modules are suited to semiconductor and passive device testing where a precisely controlled output and highly accurate measurements are needed, while the source/measure unit modules support applications such as battery drain analysis, functional test, and design validation of battery-powered digital devices where understanding current drain and DUT power management is important. ValueTronics stocks and holds its own test and measurement inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. Keeping inventory on hand and verifying used units in our own facility means an order can be filled quickly and with confidence in the unit's condition — the instruments we list are instruments we can put hands on, ready to support engineers building and maintaining their test systems. ## Brand Heritage These instruments are branded Agilent Technologies. Hewlett-Packard's test and measurement business was spun off as Agilent Technologies in 1999. Agilent's electronic measurement division was then established as Keysight Technologies in 2014, the brand under which this product line is offered today. Equipment originally branded Agilent is part of that continuous corporate lineage. ## Compare Other Models in This Series The N6700 Modular Power System is a family built around a 1U mainframe and an extensive catalog of interchangeable DC power modules. Rather than a fixed-configuration instrument, it gives test system designers the flexibility to mix and match from over 30 different DC power modules to create a 1- to 4-channel DC power system optimized to meet specific test requirements — investing in high-performance outputs where speed and accuracy are needed, and basic outputs for simple DC power requirements. Because the modules share a common mainframe, connectivity, and programming model, a system can be reconfigured or expanded over time. The catalog organizes modules into distinct series: basic DC power modules (the N6730, N6740, and N6770 ranges; N673xB, N674xB, N677xA), high-performance autoranging modules (N6750 series, N675xA), precision modules (N6760 series, N676xA), source/measure units (N6780 series; N6781A, N6782A, N6784A), and application-specific modules (N6783A, including N6783A-BAT and N6783A-MFG). Low-profile mainframe choices include the 400 W N6700B, the 600 W N6701A, and the 1200 W N6702A for automated test environments, alongside the N6705A and N6705B DC Power Analyzers for the bench. The system can be purchased as a mainframe plus separate modules for self-assembly, or as a build-to-order N6710B, N6711A, or N6712A system shipped fully assembled. Each module occupies one mainframe slot, except the double-wide N6753A–N6756A and N6763A–N6766A, which occupy two of the four slots. Each pre-owned model linked below is its own dedicated product page with condition-matched pricing. Select the specific mainframe or module that fits your configuration to see its availability and price as a pre-owned unit. Across the mainframes, output sequencing can be synchronized between multiple units by wiring the rear-panel I/O ports together — a capability supported on the N6700B, N6701A, and N6702A mainframes. The N6702A 1200 W mainframe additionally senses the available AC line power at turn-on and automatically scales back output power to avoid overloading a standard AC outlet, limiting output to 600 W so a high-power mainframe can be plugged into any standard outlet; reaching its full 1200 W requires 200 VAC operation (and option 929). A power module's available capabilities depend not only on its own hardware but also on the hardware and firmware of the mainframe in which it is installed; modules installed in an N6705 DC Power Analyzer gain front-panel scope view, arbitrary waveform generation, and data logging. The models differ primarily in mainframe power and in module output ratings and performance class. Mainframes provide 400 W (N6700B), 600 W (N6701A), or 1200 W (N6702A) of total available output power, and modules are rated from 20 W up to 500 W with output voltages ranging from 0-5 V up to 0-150 V depending on the module. Performance class also separates the series: basic modules cover programmable DC power with standard voltage and current measurement; high-performance autoranging and precision modules add autoranging output capability, and the precision series adds low voltage and current ranges, simultaneous voltage and current measurement, and precision measurement. The Source/Measure Units add two-quadrant and four-quadrant operation, battery emulator/charger and CC/CV load functions, and ranges down to a 10 microampere current range, while the application-specific N6783A-BAT and N6783A-MFG provide two-quadrant battery charge/discharge and mobile-device manufacturing test functions. High-Speed Test Extensions, output disconnect relays (option 761), and output disconnect/polarity reversal relays (option 760) are available according to each module's row in the options table. The comparison table below details each model's output ratings and key performance specifications. Model Output Voltage Output Current Output Power **N6702A** — — 1200 W N6700B — — 400 W N6701A — — 600 W N6710B — — 400 W Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. > **Replaces:** per the manufacturer, this model replaces [6621A](/products/6621a-agilent-dc-power-supply-used), [6622A](/products/6622a-agilent-dc-power-supply-used), [6623A](/products/6623a-agilent-dc-power-supply-used), [6624A](/products/6624a-agilent-dc-power-supply-used), [6625A](/products/6625a-agilent-dc-power-supply-used), [6626A](/products/6626a-agilent-dc-power-supply-used), [6627A](/products/6627a-agilent-dc-power-supply-used), [6628A](/products/6628a-agilent-dc-power-supply-used), [6629A](/products/6629a-agilent-dc-power-supply-used). ## Accessories Supplied - VXIplug&play drivers - IVI-COM drivers - Firmware update utility program ## Product Core & Specifications Specification Value Maximum Total Output Power From 200 - 240 VAC input 1200 W From 100 - 120 VAC input 600 W Combined power rating of all modules per mainframe (= sum of module output power) 1200 W Module slots Holds 1 to 4 modules Data Storage Internal flash memory 8 Mbyte Command Processing Time From receipt of command to start of output change ≤1 ms Protection Response INH input 5 µs from receipt of inhibit to start of shutdown Fault on coupled outputs < 10 µs from receipt of fault to start of shutdown Interface Capabilities GPIB SCPI - 1993, IEEE 488.2 compliant interface LXI compliance Class C (firmware revision C.00.02 and up) USB / LAN USB 2.0; 10/100 Base-T LAN; built-in web server Environmental Conditions Operating environment Indoor use, installation category II (AC input), pollution degree 2 Operating temperature 0°C to 55°C (output current derated 1% per °C above 40°C) Relative humidity Up to 95% Altitude Up to 2000 meters Storage temperature \-30°C to 70°C Acoustic noise Lp < 70 dB(A) per EN 27779 Output Terminal Isolation Maximum rating No output terminal more than ±240 VDC from any other terminal or chassis ground AC Input Nominal input ratings 100 VAC - 240 VAC; 50/60 Hz/400 Hz Input range 86 VAC - 264 VAC Power consumption 3000 VA typical; 1440 VA (@ < 180 VAC input); 2200 VA (@ > 180 VAC input) Power factor 0.99 @ nominal input and rated power Dimensions Height 44.45 mm; 1.75 in. Width 432.5 mm; 17.03 in. Depth (including handles) 633.9 mm; 24.96 in. Weight Net (with 4 installed modules, typical) 14.09 kg; 31 lbs. DC Power Module Key Performance Specifications Model DC Output Ratings (V / A / W) Ripple & Noise (p-p / rms) Voltage Programming Accuracy Current Programming Accuracy Voltage Measurement Accuracy Current Measurement Accuracy N6731B 5 V / 10 A / 50 W 10 mV / 2 mV 0.1% + 19 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 20 mA N6732B 8 V / 6.25 A / 50 W 12 mV / 2 mV 0.1% + 19 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 10 mA N6733B 20 V / 2.5 A / 50 W 14 mV / 3 mV 0.1% + 20 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 5 mA N6734B 35 V / 1.5 A / 52.5 W 15 mV / 5 mV 0.1% + 35 mV 0.15% + 20 mA 0.1% + 35 mV 0.15% + 4 mA N6735B 60 V / 0.8 A / 50 W 25 mV / 9 mV 0.1% + 60 mV 0.15% + 20 mA 0.1% + 60 mV 0.15% + 4 mA N6736B 100 V / 0.5 A / 50 W 30 mV / 18 mV 0.1% + 100 mV 0.15% + 10 mA 0.1% + 100 mV 0.15% + 2 mA N6741B 5 V / 20 A / 100 W 20 mV / 2 mV 0.1% + 19 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 20 mA N6742B 8 V / 12.5 A / 100 W 12 mV / 2 mV 0.1% + 19 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 10 mA N6743B 20 V / 5 A / 100 W 14 mV / 3 mV 0.1% + 20 mV 0.15% + 20 mA 0.1% + 20 mV 0.15% + 5 mA N6744B 35 V / 3 A / 105 W 15 mV / 5 mV 0.1% + 35 mV 0.15% + 20 mA 0.1% + 35 mV 0.15% + 4 mA N6745B 60 V / 1.6 A / 100 W 25 mV / 9 mV 0.1% + 60 mV 0.15% + 20 mA 0.1% + 60 mV 0.15% + 4 mA N6746B 100 V / 1 A / 100 W 30 mV / 18 mV 0.1% + 100 mV 0.15% + 10 mA 0.1% + 100 mV 0.15% + 2 mA N6751A 50 V / 5 A / 50 W 4.5 mV / 0.35 mV 0.06% + 19 mV 0.1% + 20 mA 0.05% + 20 mV 0.1% + 4 mA N6752A 50 V / 10 A / 100 W 4.5 mV / 0.35 mV 0.06% + 19 mV 0.1% + 20 mA 0.05% + 20 mV 0.1% + 4 mA N6753A 20 V / 50 A / 300 W 5 mV / 1 mV 0.06% + 10 mV 0.1% + 30 mA 0.05% + 10 mV 0.1% + 30 mA N6754A 60 V / 20 A / 300 W 6 mV / 1 V 0.06% + 25 mV 0.1% + 12 mA 0.05% + 25 mV 0.1% + 8 mA N6755A 20 V / 50 A / 500 W 5 mV / 1 mV 0.06% + 10 mV 0.1% + 30 mA 0.05% + 10 mV 0.1% + 30 mA N6756A 60 V / 17 A / 500 W 6 mV / 1 V 0.06% + 25 mV 0.1% + 12 mA 0.05% + 25 mV 0.1% + 8 mA N6761A 50 V / 1.5 A / 50 W 4.5 mV / 0.35 mV 0.016% + 6 mV 0.04% + 0.2 mA 0.016% + 6 mV 0.04% + 0.16 mA N6762A 50 V / 3 A / 100 W 4.5 mV / 0.35 mV 0.016% + 6 mV 0.04% + 0.2 mA 0.016% + 6 mV 0.04% + 0.16 mA > **Important:** Installing one of the 500 W modules in the 400 W N6700B mainframe may prevent that module from running at its full rated output power. > **Important:** Each module occupies one module slot, except the N6753A-N6756A and N6763A-N6766A double-wide modules, which each occupy two of the four mainframe slots. The N6753A and N6754A 300 W high-performance autoranging modules each occupy 2 module slots in the mainframe; all other modules occupy 1 module slot. > **Important:** When configuring a mainframe with fewer than four filled module slots, you MUST order a filler panel kit (N6708A); each kit contains three filler panels, and every empty module slot must be filled with a filler panel for proper operation. > **Important:** If you will be rack mounting the N6700, you MUST order the Rack Mount Kit (option 908 / N6709A); standard rack rails or slides are not compatible with the N6700 because of its 1U size and airflow requirements. > **Important:** For model N6702A (and the N6712A system), the maximum output power is limited to 600 W at 100–120 VAC; to achieve full output power of 1200 W you must use option 929 and operate at 200–240 VAC. AC mains circuits rated at 100-180 VAC cannot supply enough current to power the N6702A mainframe at its full rated power; when connected to a 100-180 VAC mains, internal circuits limit the power available to modules to 600 W maximum. > **Important:** When the N6702A 1200 W mainframe is plugged into a standard AC outlet, it automatically limits output power to 600 W to prevent overloading the AC line. > **Important:** Output current is derated 1% per °C above 40 °C ambient temperature. > **Important:** Output terminal isolation: no output terminal may be more than ±240 VDC from any other terminal or chassis ground. When using the auxiliary measurement input terminals on the N6781A, no output or input terminal may be more than ±60 VDC from any other terminal and chassis ground. > **Important:** Output current is limited on some modules when option 760 (Output Disconnect/Polarity Reversal Relays) is installed; option 760 limits output current to 10 A maximum on models N6742B and N6773A, and is not available on models N6741B, N6751A, N6752A, N6761A, N6762A, and N6781A - N6784A. > **Important:** Option 2UA (200 µA measurement range) is only available on Models N6761A and N6762A. > **Important:** Option LGA (large-size FPGA) must be ordered on the N6751A and N6752A modules; it is required to support output sequencing between multiple mainframes. > **Important:** Multi-mainframe output sequencing synchronization is supported on the N6700B, N6701A, and N6702A mainframes; it is not supported on the discontinued N6700A mainframe. > **Important:** Power modules require an Agilent N6700-series (N6700B/N6701A/N6702A) or N6705 DC Power Analyzer (N6705A/N6705B) mainframe to operate; a module is not a standalone instrument. The basic capabilities of a power module depend not only on its own hardware but also on the hardware and firmware of the mainframe in which it is installed. > **Important:** If you add modules with model numbers N673xA, N673xB, N674xA, N674xB, N6753A, N6754A or N677xA to an N672xA, you will not be able to access the Agilent 662x command set for any installed modules; only SCPI commands will be accepted. > **Important:** New modules N6753A and N6754A require mainframe firmware version C.02.00 or greater (available at www.agilent.com/find/N6700firmware). > **Important:** N6783A modules cannot be used in series with other N6783A modules or any other N67xx module. > **Important:** When sinking power, Model N6784A can operate at the maximum rated output power for only a limited amount of time; the unit monitors internal power device temperature and latches the output off if the safe limit is exceeded (annunciated by the OT status bit). > **Important:** Performance specifications for the N6780 Series 2-quadrant SMU modules (N6781A, N6782A) are not included in this datasheet; see the N6780 Series Source/Measure Units (SMUs) for the N6700 Modular Power System Data Sheet, literature number 5990-5829EN. > Recommended pairing: these DC power modules install in the Agilent N6700B through N6705B mainframes covered in this series, including the N6705 DC Power Analyzer mainframe for front-panel scope view, arbitrary waveform generation, and data logging. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - **Vendor:** Agilent - **Type:** Dc Supply - **Tags:** 6702, Agilent, Agilent Keysight, Agilent Technologies, consignment-active, DC Power Supply, Dc Supply, Inc., Keysight, Keysight Technologies, Manufacturers, Model 6702, N6702, N6702A, Power Supplies & Loads, Pre-Owned, product_manual_group_1, Product_used, Updated Item Review ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 0.00 USD | In stock | | NIST Traceable with Full Data | 0.00 USD | In stock | | ISO IEC 17025 Accredited | 0.00 USD | In stock | ## Images - Agilent N6702A Low-Profile Modular Power System Mainframe, 1200 W (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/n6702a-agilent-dc-power-supply-used) > Updated: 2026-06-20