# Agilent N5247A 2-Port PNA-X Network Analyzer, 10 MHz to 67 GHz (Option 200) (Pre-Owned) # Agilent N5247A 2-Port PNA-X Network Analyzer, 10 MHz to 67 GHz (Option 200) (Pre-Owned) ## Key Features At A Glance - 10 MHz to 67 GHz frequency range with 1.85 mm test port connectors - Available in 2-port and 4-port configurations - GPIB (IEEE-488), 10/100BaseT LAN, and USB 2.0 interfaces; LXI Class C compliant - 1 Hz frequency resolution and ±1 ppm frequency accuracy - Optional high-accuracy noise figure measurement hardware (Option 029, requires Option 224 or 423) - Optional extended power range adding source/receiver attenuators and bias-tees (Options 219/419) - 10.4-inch color LCD at 1024 x 768 resolution with internal Intel Core i7 controller The Agilent N5247A is a PNA-X microwave network analyzer covering 10 MHz to 67 GHz, offered in both 2-port and 4-port configurations. It measures the magnitude and phase of a device's S-parameters — its reflection and transmission characteristics — across the specified frequency range, presenting the results on an integrated color display. Across its option set the analyzer performs reflection and transmission S-parameter measurements as well as group delay measurements. With Option 029 it adds hardware and firmware for high-accuracy noise figure measurements, and its internal receiver gates support point-in-pulse and pulse-profile measurements. Source and receiver behavior is characterized in detail through corrected and uncorrected system performance, dynamic range, harmonic, phase noise, and dynamic accuracy specifications. ValueTronics stocks and holds its own inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. ## Brand Heritage Agilent Technologies was established in 1999 as a spin-off from Hewlett-Packard, taking on its test and measurement business. In 2014, that test and measurement division was renamed Keysight Technologies. ## Compare Other Models in This Series The N5247A PNA-X is offered as a 2-port or 4-port microwave network analyzer covering 10 MHz to 67 GHz, configured through a family of test-set options. The 2-port path is built around Options 200, 219, and 224, while the 4-port path uses Options 400, 419, and 423. Each configuration shares the same core frequency range, 1.85 mm test ports, and control interfaces, but differs in port count, available power range, and added source and switching hardware. The comparison below maps those configuration differences. Each model and option configuration linked below is its own dedicated product page with condition-matched pricing. Select the pre-owned listing that matches the port count, options, and condition your application requires. Within the PNA-X line, the N5247A is specified to 67 GHz with 1.85 mm test port connectors, with typical performance shown to 70 GHz where available. The primary configuration differences are port count and added hardware. Options 200 and 400 are the standard 2-port and 4-port test sets with base power range; Options 219 and 419 add extended power range with source and receiver attenuators and bias-tees; and Options 224 and 423 add an internal second source, combiner, and mechanical switches. Option 029 is a separate addition that provides hardware and firmware for high-accuracy noise figure measurements and requires Option 224 or 423. Refer to the comparison table for the per-configuration option requirements and dependencies. Model Frequency Range Ports Max Settable Power **N5247A** 10 MHz to 67 GHz 2 30 dBm Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - Bottom feet - Handles - Front and rear panel hardware ## Product Core & Specifications Specification Value Frequency Information, All Options Frequency Range 10 MHz to 67 GHz (specification); 67 GHz to 70 GHz (typical) Frequency Resolution 1 Hz Frequency Accuracy ±1 ppm Frequency Stability ±0.05 ppm, -10° to 70° C (typical); ±0.1 ppm/yr maximum Source Power (Tables 12, 13) Power Resolution 0.01 dB Maximum Settable Power 30 dBm (typical) Minimum Settable Power (Options 200, 400) \-30 dBm Minimum Settable Power (Options 219, 419, 224, 423) \-80 dBm Preset (Nominal) Power (Options 200, 400) 0 dBm Preset (Nominal) Power (Options 219, 419, 224, 423) \-5 dBm 2nd and 3rd Harmonics at Max Specified Power (dBc), All Options - Typical 10 MHz to 2 GHz, Ports 1,3 / Source 2 Out 1 \-51 dBc 10 MHz to 2 GHz, Port 2,4 / Source 2 Out 2 \-13 dBc 2 GHz to 13.5 GHz, Ports 1,3 / Source 2 Out 1 \-60 dBc 2 GHz to 13.5 GHz, Port 2,4 / Source 2 Out 2 \-21 dBc 13.5 GHz to 70 GHz, Ports 1,3 / Source 2 Out 1 \-60 dBc 13.5 GHz to 70 GHz, Port 2,4 / Source 2 Out 2 \-60 dBc Non-Harmonic Spurs at Nominal Power (dBc), All Options, All Ports - Typical (8 kHz / 100 kHz offset Frac-N) 10 MHz to 500 MHz \-50 / -50 500 MHz to 2 GHz \-60 / -42 2 GHz to 4 GHz \-57 / -45 4 GHz to 8 GHz \-51 / -39 8 GHz to 16 GHz \-45 / -33 16 GHz to 48 GHz \-39 / -27 48 GHz to 64 GHz \-33 / -21 64 GHz to 70 GHz \-27 / -15 Phase Noise (dBc/Hz), All Options, All Ports - Typical (1 kHz / 10 kHz / 100 kHz / 1 MHz offset) 10 MHz to 500 MHz \-100 / -95 / -95 / -120 500 MHz to 1 GHz \-107 / -117 / -112 / -127 1 GHz to 2 GHz \-101 / -111 / -106 / -121 2 GHz to 4 GHz \-95 / -105 / -100 / -115 4 GHz to 8 GHz \-89 / -99 / -94 / -109 8 GHz to 16 GHz \-83 / -93 / -88 / -103 16 GHz to 32 GHz \-77 / -87 / -82 / -97 32 GHz to 64 GHz \-71 / -81 / -76 / -91 64 GHz to 70 GHz \-65 / -75 / -70 / -85 Noise Floor (dBm) @ 10 Hz IFBW, Test Port, All Ports, All Options - Specification 10 MHz to 50 MHz \-70 50 MHz to 100 MHz \-92 100 MHz to 500 MHz \-100 500 MHz to 1 GHz \-110 1 GHz to 10 GHz \-115 10 GHz to 13.5 GHz \-116 13.5 GHz to 16 GHz \-117 16 GHz to 26.5 GHz \-118 26.5 GHz to 35 GHz \-106 35 GHz to 40 GHz \-105 40 GHz to 50 GHz \-102 50 GHz to 60 GHz \-101 60 GHz to 67 GHz \-100 Test Port Compression at 0.1 dB (dBm), All Options, All Ports - Typical 10 MHz to 10 GHz 15 10 GHz to 30 GHz 12 30 GHz to 67 GHz 11 Reference Level - Specification Range ±500 (Magnitude, dB); ±500 (Phase, degree) Resolution 0.001 (Magnitude, dB); 0.01 (Phase, degree) Damage Input Level - Specification Test Ports 1, 2, 3, 4 (All Options) \> +24 dBm RF; 40 V DC Source 2 Out 1, Source 2 Out 2 (Option 224 only) \> +24 dBm RF; 0 V DC Test Port 1, Noise Mode (Option 029 only) \> +10 dBm RF; 40 V DC Test Port 2, Noise Mode (Option 029 only) \> +27 dBm RF; 40 V DC Miscellaneous Information System IF Bandwidth Range 1 Hz to 15 MHz (7 MHz, 10 MHz, and 15 MHz IFBWs available ONLY with FW A.09.42 and later, and with DSP version 5) CPU Intel 2.0 GHz Core i7 LXI Class C Front Panel Information, All Options Test Ports 1.85 mm (male), 50 ohm (nominal), 0.002 in. Center Pin Recession (characteristic) Jumpers 1.85 mm (female) connectors with 1.85 mm (male) jumper cables USB 2.0 Ports Master (4 ports), USB Type-A female, compatible with USB 2.0 Display Size 26.3 cm (10.4 in) diagonal color active matrix LCD; 1024 (horizontal) X 768 (vertical) resolution Rear Panel Information, All Options 10 MHz Reference In BNC female; 10 MHz ±10 ppm; Input Level -15 dBm to +20 dBm; Input Impedance 200 Ω nom. 10 MHz Reference Out BNC female; 10 MHz ±1 ppm; Sine Wave; +10 dBm ±4 dB into 50 Ω; Output Impedance 50 Ω nominal LAN 10/100BaseT Ethernet, 8-pin configuration; auto selects between the two data rates GPIB Two ports - dedicated controller and dedicated talker/listener; 24-pin D-sub (Type D-24), female; compatible with IEEE-488 Line Power (Frequency, Voltage) 50/60/400 Hz for 100 to 120 VAC; 50/60 Hz for 220 to 240 VAC; auto switching Line Power (Max) 450 watts Analyzer Dimensions and Weight (Table 34) Height (without bottom feet, EIA RU = 6) 266.1 mm (10.5 in) Height (with bottom feet) 280.0 mm (11.0 in) Width (without handles or rack-mount flanges) 425.9 mm (16.8 in) > **Important:** Maximum (damage) input level at test ports 1–4: greater than +24 dBm RF and 40 V DC (all options). > **Important:** All specifications and characteristics apply over a 25 °C ±5 °C range (unless otherwise stated) and 90 minutes after the instrument has been turned on. > **Important:** Typical performance information between 67 GHz and 70 GHz is shown where available; performance is degraded at particular frequencies in this range due to the modes of the 1.85 mm connectors used in the analyzer, test port cables and adapters. > **Important:** Option configuration requirements: Option 219 requires Option 200; Option 224 requires Options 200, 219, and 080; Option 419 requires Option 400; Option 423 requires Options 400, 419, and 080; Option 029 (high-accuracy noise figure) requires one of Option 224 or 423. > **Important:** Corrected system performance and full 2-port calibration specifications apply when used with the 85058B (1.85 mm) calibration kit (or N4694A 2-Port ECal module) and the N4697F flexible test port cable set; these calibration items are documented in this datasheet as part of the measurement setup. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 675.0 USD - **Vendor:** Agilent - **Type:** Network Analyzer - **Tags:** Agilent, Agilent Keysight, Analyzers, Manufacturers, Network, product_manual_group_1, Product_used ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 600.00 USD | In stock | | NIST Traceable with Full Data | 637.50 USD | In stock | | ISO IEC 17025 Accredited | 675.00 USD | In stock | ## Images - Agilent N5247A 2-Port PNA-X Network Analyzer, 10 MHz to 67 GHz (Option 200) (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/n5247a-agilent-network-analyzer-used) > Updated: 2026-07-06