# Anritsu MS2722C 9 kHz to 9 GHz Handheld Spectrum Analyzer (Pre-Owned) # Anritsu MS2722C 9 kHz to 9 GHz Handheld Spectrum Analyzer (Pre-Owned) ## Key Features At A Glance - 9 kHz to 9 GHz frequency range, tunable to 0 Hz; preamplifier coverage 100 kHz to 9 GHz - DANL to –160 dBm in 1 Hz RBW (10 MHz to 4 GHz, internal preamp on) - Dynamic range greater than 104 dB in 1 Hz RBW (2/3 TOI–DANL at 2.4 GHz) - SSB phase noise –100 dBc/Hz at 10 kHz offset from a 1 GHz carrier - ±25 ppb frequency accuracy with the optional GPS receiver (Option 31) - Resolution bandwidth 1 Hz to 10 MHz; internal preamplifier and AM/FM/SSB demodulation standard - 10/100 LAN and USB data transfer with the MST Remote Access Tool for remote operation - 8.4 in 800×600 display; 3.5 kg (7.8 lb); ~2.5 h Li-Ion battery; under 5 min warm-up The Anritsu MS2722C is a high performance handheld spectrum analyzer covering 9 kHz to 9 GHz, part of the Spectrum Master line. It is built to give wireless professionals the performance needed for demanding measurements in harsh RF and physical environments, packaged in a field-portable instrument measuring 315 mm x 211 mm x 77 mm (12.4 in x 8.3 in x 3.0 in) and weighing 3.5 kg (7.8 lb). Typical work for this analyzer spans spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, and Wi-Fi and wireless network measurements. Standard smart measurements include field strength, occupied bandwidth, channel power, ACPR, carrier-to-interference ratio (C/I), and emission mask. ValueTronics stocks and holds its own inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Operating in test and measurement since 1992, we keep instruments like this Spectrum Master on hand for fast fulfillment; every pre-owned unit is inspected and functionally verified by our technicians before it ships, while new units ship factory-sealed exactly as received from the manufacturer. ## Accessories Supplied - Handheld Instruments Documentation Disc (10920-00060) - Spectrum Master User Guide (10580-00277, includes GPS Receiver) - Master Software Tools (MST) CD Disc (2300-498) - Soft Carrying Case (2000-1685-R) - Rechargeable Li-Ion Battery (633-44; for replacement, use high-capacity battery, part number 633-75) - AC/DC Power Supply (40-187-R) - Automotive Cigarette Lighter 12 Volt DC Adapter (806-141-R) - Ethernet Cable, 7 feet/213 cm (2000-1371-R) - USB A-mini B Cable, 10 feet/305 cm (3-2000-1498) - MS2722C Spectrum Master Technical Data Sheet (11410-00529) - One Year Warranty (Including battery, firmware, and software) - Certificate of Calibration and Conformance ## Product Core & Specifications Specification Value Frequency Frequency Range 9 kHz to 9 GHz (tunable to 0 Hz), Preamp 100 kHz to 9 GHz Tuning Resolution 1 Hz Frequency Reference Aging ±1.0 ppm/10 years Frequency Reference Accuracy ±0.3 ppm (25 °C ±25 °C) + aging Auto-sensing External Frequency Reference 1, 1.2288, 1.544, 2.048, 2.4576, 4.8, 4.9152, 5, 9.8304, 10, 13, 19.6608 MHz Frequency Span 10 Hz to 9 GHz including zero span Sweep Time 10 µs to 600 seconds in zero span Sweep Time Accuracy ±2 % in zero span Bandwidth (Performance Sweep Mode) Resolution Bandwidth (RBW) 1 Hz to 10 MHz in 1–3 sequence ±10 % (–3 dB bandwidth) Video Bandwidth (VBW) 1 Hz to 10 MHz in 1–3 sequence (–3 dB bandwidth) RBW with Quasi-Peak Detection 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth) VBW with Quasi-Peak Detection Auto VBW is On, RBW/VBW = 1 Spectral Purity — SSB Phase Noise at 1 GHz 10 kHz offset from carrier –100 dBc/Hz (–104 dBc/Hz typical) 100 kHz offset from carrier –102 dBc/Hz (–107 dBc/Hz typical) 1 MHz offset from carrier –107 dBc/Hz (–114 dBc/Hz typical) 10 MHz offset from carrier –120 dBc/Hz (–129 dBc/Hz typical) Amplitude Ranges Dynamic Range \> 104 dB @ 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW Measurement Range DANL to +30 dBm Display Range 1 to 15 dB/div in 1 dB steps, ten divisions displayed Reference Level Range –150 dBm to +30 dBm Attenuator Resolution 0 to 65 dB, 5 dB steps Amplitude Units Log Scale Modes: dBm, dBV, dBmv, dBµV; Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW Maximum Continuous Input +30 dBm Peak, ±50 VDC (≥10 dB Attn); +23 dBm Peak, ±50 VDC (< 10 dB Attn); +13 dBm Peak, ±50 VDC (Preamp On) Amplitude Accuracy (single sine wave input < Ref level, > DANL, auto attenuation, Performance Sweep Mode) 20 °C to 30 °C after 30 minute warm-up Typical: ±0.5 dB, 100 kHz to 9 GHz; Maximum: ±1.3 dB, 100 kHz to 9 GHz –10 °C to 50 °C after 60 minute warm-up Add ±1.0 dB, 100 kHz to 9 GHz Displayed Average Noise Level (DANL) in 1 Hz RBW, 0 dB attenuation 10 MHz to 4 GHz, Preamp Off –141 dBm 10 MHz to 4 GHz, Preamp On –160 dBm \> 4 GHz to 9 GHz, Preamp Off –134 dBm \> 4 GHz to 9 GHz, Preamp On –156 dBm Third-Order Intercept (TOI) (–20 dBm tones 100 kHz apart, –20 dBm Ref level, 0 dB input attenuation, Preamp Off) 2.4 GHz +15 dBm 50 MHz to 9 GHz +20 dBm typical P1 dB < 4 GHz +5 dBm typical 4 GHz to 9 GHz +12 dBm typical Second Harmonic Distortion 50 MHz –54 dBc < 4 GHz –60 dBc typical \> 4 GHz –75 dBc typical VSWR (> 10 dB input attenuation) < 9 GHz 1:5:1 typical Spurs Residual Spurs, Preamp Off (RF input terminated) –90 dBm, 9 kHz to 9 GHz Residual Spurs, Preamp On (RF input terminated) –100 dBm, 1 MHz to 9 GHz Input-Related Spurs (–30 dBm input, span < 1.7 GHz) –60 dBc, –70 dBc typical Display Size 8.4 in Resolution 800 x 600 Battery Type Li-Ion Battery Operation 2.5 hours, typical Memory Internal Trace/Setup Memory \> 13,000 traces External Trace/Setup Memory Limited by size of USB Flash drive Connectors RF In Type N, male, 50 Ω, Maximum Input +30 dBm, ±50 VDC GPS SMA Female External Power 5.5 mm barrel connector, 12 to 15 VDC, < 5.0 Amps LAN Connection RJ48C, 10/100 Mbps, Connect to PC or LAN for Remote Access USB Interface (2) Type A, Connect Flash Drive and Power Sensor USB Interface 5-pin mini-B, Connect to PC for data transfer Headset Jack 2.5 mm 3-wire headset jack External Reference In BNC, female, 50 Ω, Maximum Input –10 dBm to +10 dBm External Reference Out BNC, female, 50 Ω, 10 MHz External Trigger BNC, female, 50 Ω, Maximum Input ±5 VDC IF Out BNC, female, 50 Ω, 140 MHz Electromagnetic Compatibility European Union CE Mark, EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC and Low Voltage Directive 73/23/EEC, 93/68/EEC Australia and New Zealand C-tick N274 Interference EN 61326-1 Emissions EN 55011 Immunity EN 61000-4-2/-3/-4/-5/-6/-11 Safety Safety Class EN 61010-1 Class 1 Product Safety IEC 60950-1 when used with Company supplied Power Supply Environmental Operating Temperature –10 °C to 55 °C Maximum Humidity 85% Shock MIL-PRF-28800F Class 2 Storage –51 °C to 71 °C Altitude 4600 meters, operating and non-operating Size and Weight Size 315 mm x 211 mm x 77 mm (12.4 in x 8.3 in x 3.0 in) Weight 3.5 kg (7.8 lb) > **Important:** Maximum continuous input: +30 dBm peak, ±50 VDC (≥10 dB attenuation); +23 dBm peak, ±50 VDC (<10 dB attenuation); +13 dBm peak, ±50 VDC (preamp on). > **Important:** The Secure Data Operation Option (Option 7) cannot be switched between secure and non-secure operation by the user once configured for secure data operation; setup and measurement information is stored only to the external USB memory location. > **Important:** The High Accuracy Power Meter Option (Option 19) requires an external USB Power Sensor (such as the PSN50, MA24105A, MA24106A, MA24108A, MA24118A, or MA24126A), which is ordered separately. > **Important:** The GPS Receiver Option (Option 31) requires a GPS Antenna, P/N 2000-1528-R or 2000-1652-R; Anritsu GPS antennas 2000-1528-R and 2000-1652-R require 5 VDC. > **Important:** I/Q Waveform Capture (Option 24) requires Option 9; CDMA and EV-DO Over-the-Air (OTA) Measurements require Option 9 and Option 31. > **Important:** Recommended calibration cycle is 12 months. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - **Vendor:** Anritsu - **Type:** Spec An - **Tags:** Analyzers, Anritsu, Manufacturers, product_manual_group_3, Product_used, Spectrum ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 0.00 USD | In stock | ## Images - Anritsu MS2722C 9 kHz to 9 GHz Handheld Spectrum Analyzer (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/ms2722c-anritsu-spectrum-analyzer-used) > Updated: 2026-06-20