# Anritsu MS2711D Spectrum Master 100 kHz to 3.0 GHz Handheld Spectrum Analyzer (Pre-Owned) # Anritsu MS2711D Spectrum Master 100 kHz to 3.0 GHz Handheld Spectrum Analyzer (Pre-Owned) ## Key Features At A Glance - Maximum input ±50 Vdc without damage on a Type N, 50 Ω RF input - 100 kHz to 3.0 GHz frequency range for modern wireless communication systems - Standard built-in preamplifier increases sensitivity and dynamic range - RS-232 serial interface for automated control, field data collection, and direct printer output - One-button channel power, occupied bandwidth, ACPR, and C/I measurements - Stores up to 10 test setups and 200 measurement traces in non-volatile memory - Battery-operated handheld; 4.5 lb base weight with 2.5 hours continuous operation - Local-language GUI in Chinese, Japanese, French, German, and Spanish The Anritsu Spectrum Master MS2711B/D is a handheld spectrum analyzer built for field environments and applications requiring mobility. Its rugged, ultra-lightweight, battery-operated design lets users perform spectrum analysis measurements anywhere, free from AC/DC power requirements, while locating, identifying, recording, and solving communication system problems quickly. Covering 100 kHz to 3.0 GHz, it is intended for engineers and technicians installing, maintaining, or troubleshooting modern wireless communication systems, including finding the source of interfering signals. Typical applications span transmitter spectrum analysis — occupied bandwidth, power, and modulation measurements, plus the location and identification of in-band, out-of-channel, and out-of-band spurious signals — and receive signal analysis, where it measures receiver sensitivity and locates sources of interfering signals. It also supports modulation identification, modulation depth, deviation, and spectral mask work, and signal strength mapping to determine the most suitable location for antennas, base stations, and repeaters or to pinpoint electromagnetic leakage in broadcast systems. ValueTronics stocks and holds its own test-and-measurement inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, so the instruments we list are equipment we keep on hand. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. That combination lets buyers source this analyzer with confidence in both availability and condition. ## Compare Other Models in This Series The Spectrum Master family pairs two handheld spectrum analyzers — the MS2711B and the MS2711D — that share a common 100 kHz to 3.0 GHz frequency range, rugged battery-operated packaging, and a standard built-in preamplifier. Both deliver synthesizer-based performance, one-button channel power, occupied bandwidth, and ACPR measurements, and the same Type N 50 Ω RF input. Within that shared platform, the two models diverge in resolution bandwidth, sensitivity, display options, and the option set each can carry. The MS2711B centers on tracking-generator-based work, while the MS2711D adds finer resolution bandwidth, deeper sensitivity, and transmission and power-measurement options. Each pre-owned model below is listed on its own dedicated product page with condition-matched pricing, so you can select the MS2711B or MS2711D configuration that fits your application and budget. The specifications shown here apply across the family; confirm the exact model on its individual page before ordering. The clearest differences appear in resolution bandwidth and sensitivity. The MS2711B offers resolution bandwidths of 10 kHz to 1 MHz and preamp-on sensitivity to –115 dBm, while the MS2711D narrows resolution bandwidth to 100 Hz and reaches –135 dBm for work on lower-level signals. The MS2711D also provides finer attenuator resolution in 1 dB steps versus 10 dB steps on the MS2711B, along with a faster full-span sweep. The models also differ in display and options. The MS2711B uses a VGA monochrome LCD and accepts the Option 20 tracking generator, whereas the MS2711D offers a VGA color or monochrome display and supports transmission measurement (Option 21), a power meter (Option 29), and the FCN4760 frequency converter. The comparison table below details the per-model frequency span, sweep time, sensitivity, and maximum input specifications. Model Frequency Range Resolution Bandwidth Displayed Avg. Noise Level **MS2711D** 100 kHz to 3.0 GHz 100 Hz to 1 MHz in 1-3 sequence, ±5% ≤–135 dBm typical, ≥1 MHz (preamp on) MS2711B 100 kHz to 3.0 GHz 10 kHz, 30 kHz, 100 kHz, 1 MHz, ±20% –115 dBm (≥1 MHz typical with preamp on) Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - User's Guide, MS2711B - Soft Carrying Case - AC – DC Adapter - Automotive Cigarette Lighter/12 Volt DC Adapter - One Year Warranty - CD ROM containing Software Management Tools - Serial Interface Cable - Rechargeable battery, NiMH - Pre-amplifier (built-in) ## Product Core & Specifications Specification Value Frequency Frequency range 100 kHz to 3.0 GHz Frequency reference Aging: ±1 ppm/yr; Accuracy: ±2 ppm Frequency span 10 Hz to 2.99 GHz in 1, 2, 5 step selections in auto mode, plus zero span Sweep time ≤1.1 second full span; ≤50 msec to 20 second zero span Resolution bandwidth (–3 dB width) 100 Hz to 1 MHz in 1-3 sequence, ±5% Video bandwidth (–3 dB) 3 Hz to 1 MHz in 1-3 sequence, ±5% SSB Phase Noise (1 GHz) @30 kHz Offset ≤–75 dBc/Hz Spurious responses (input related) ≤–45 dBc Spurious residual responses ≤–90 dBm (≥500 kHz) Amplitude Measurement range +20 dBm to –135 dBm (with preamp on) Displayed average noise level ≤–135 dBm typical, ≥1 MHz (preamp on); ≤–115 dBm typical, ≥500 kHz to <1 MHz; ≤–110 dBm typical, <500 kHz (for input terminated, 0 dB attenuation, RMS detection, 100 Hz RBW) Dynamic range \>65 dB, typical Total level accuracy ±0.5 dB typical (±1 dB max), ≥10 MHz to 2 GHz; ±1 dB typical (±1.5 dB max), >2 GHz to 3 GHz; ±2 dB, ≥500 kHz to <10 MHz; ±3 dB typical, <500 kHz (for input signal levels ≥–60 dBm, excludes input VSWR mismatch) Display range 1 to 15 dB/div in 1 dB steps, ten divisions displayed Max input level without damage +43 dBm (Peak), ±50 Vdc Attenuator range 0 to 51 dB, selected manually or automatically coupled to the reference level. Resolution in 1 dB steps. RF input VSWR 1.5:1 typical, (≥20 dB atten., 10 MHz to 2.4 GHz) General Internal trace memory 200 maximum Setup storage 10 test setups Display VGA Color or VGA Monochrome LCD RF In Type N, female, 50 Ω RF Out Type N, female, 50 Ω Ext trig In BNC, female (5V TTL) Ext Freq Ref In (2 MHz to 20 MHz) Shared BNC, female, 50 Ω (–15 dBm to +10 dBm) Serial Interface RS-232 9 pin D-sub, three wire serial Electromagnetic compatibility Meets European community requirements for CE marking Safety Conforms to EN 61010-1 for Class 1 portable equipment Temperature, operating –10°C to 55°C, humidity 85% or less Temperature, non-operating –51°C to +71°C (recommend battery stored separately between 0°C to 40°C for any prolonged storage period) Power supply, external DC input +12.5 to +15 volts dc, 1350 mA max Power supply, internal NiMH battery: 10.8 volts, 1800 mAH Size (W x H x D) 25.4 cm x 17.8 cm x 6.10 cm (10.0 in x 7.0 in x 2.4 in) Weight <2.14 kg (4.7 lbs.) includes battery; <2.28 kg (5 lbs) includes transmission measurement Transmission Measurement (Option 21) Frequency range 25 MHz to 3 GHz Frequency resolution 10 Hz Output power level –10 dBm typical Output impedance 50 Ω Power Meter (Option 29) Frequency range 3 MHz to 3.0 GHz Total level accuracy ±1 dB max (±0.5 dB typical) for input signal levels >–60 dBm (10 MHz to 2 GHz, excludes input VSWR); ±1.5 dB max (±1 dB typical), >2 GHz to 3 GHz; ±2 dB max, 3 MHz to 10 MHz Measurement range +20 dBm to –80 dBm Frequency span 3 MHz to 2.99 GHz Display range +80 dBm to –80 dBm Offset range 0 to 60 dB Maximum input power +20 dBm without input attenuator Bias Tee (Option 10) Voltage +18 Vdc Current 1 A peak 200 ms, 300 mA max steady state FCN4760 Frequency Converter Frequency range 4.7 GHz to 6 GHz Frequency resolution 10 Hz Frequency reference Aging: ±1 ppm/yr; Accuracy: ±2 ppm SSB Phase Noise (6 GHz) @30 kHz Offset ≤–65 dBc/Hz Spurious responses (input related) ≤–45 dBc Spurious residual responses ≤–90 dBm Measurement range –40 dBm to –100 dBm Sensitivity (displayed avg. noise level) –100 dBm Maximum input level without damage –5 dBm RF input VSWR 2.0:1 max RF In Type N, female, 50 Ω RF Out Type N, male, 50 Ω Communication Interface 10 pin D sub Electromagnetic compatibility Meets European community requirements for CE marking Safety Conforms to EN 61010-1 for Class 1 portable equipment Temperature, operating –10°C to 50°C, humidity 85% or less Temperature, non-operating –50°C to +80°C Power dissipation 850 mW max Size (W x H x D) 6.6 cm x 10.9 cm x 3.3 cm (2.6 in x 4.3 in x 1.3 in) Weight <0.45 kg (<1 lb.) > **Important:** Maximum input level without damage: +23 dBm (MS2711B) or +43 dBm peak (MS2711D), ±50 Vdc. > **Important:** Option availability differs by model: Option 20 (built-in tracking generator) is for the MS2711B only; Option 3 (color display), Option 6 (frequency converter controller module for FCN4760), Option 21 (built-in transmission measurement), and Option 29 (power meter) are for the MS2711D only. > **Important:** For any prolonged storage period, Anritsu recommends the NiMH battery be stored separately between 0°C to 40°C. > **Important:** FCN4760 Frequency Converter specifications apply only when the converter is connected to the MS2711D spectrum analyzer, which requires Option 6 (frequency converter controller module). > Recommended pairing: the FCN4760 Frequency Converter extends the MS2711D to a 4.7 GHz to 6 GHz range and requires the Option 6 frequency converter controller module. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 675.0 USD - **Vendor:** Anritsu - **Type:** Spec An - **Tags:** Analyzers, Anritsu, Manufacturers, product_manual_group_1, Product_used, Spectrum ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 525.00 USD | In stock | | NIST Traceable with Full Data | 600.00 USD | In stock | | ISO IEC 17025 Accredited | 675.00 USD | In stock | ## Images - Anritsu MS2711D Spectrum Master 100 kHz to 3.0 GHz Handheld Spectrum Analyzer (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/ms2711d-anritsu-spectrum-analyzer-used) > Updated: 2026-07-06