# Extech MN36 Autoranging Mini MultiMeter # Extech MN36 Autoranging Mini MultiMeter ## Key Features At A Glance - AC and DC voltage measurement up to 600 V - DC current measurement up to 10 A - Type K thermocouple temperature measurement to 1400°F (750°C) - Resistance measurement with continuity and diode test functions - Available as a manual-ranging (MN35) or autoranging (MN36) variant - Compact mini form factor with protective rubber holster and tilt stand - Data Hold locks the present reading in the display - Ships with rubber holster, battery, test leads, and a Type K thermocouple probe The Extech MN35 and MN36 are compact Digital Mini MultiMeters that combine the core electrical measurement functions of a handheld DMM with an integrated thermocouple temperature function. The MN35 is a manual-ranging instrument, while the MN36 is an autoranging instrument; both share the same mini form factor, large easy-to-read digital display, protective rubber holster, and tilt stand. A digital multimeter is one of the most universal diagnostic tools on an electronics bench, letting a technician measure voltage, current, and resistance from a single handheld instrument. This family extends that core toolkit with a Type K thermocouple temperature function and a Data Hold control that locks the present reading in the display for easier note-taking and harder-to-reach measurement points. ValueTronics stocks and holds its own inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. ## Brand Heritage Extech Instruments Corporation became part of FLIR Systems in 2007. FLIR Systems was subsequently acquired by Teledyne Technologies in 2021, placing the Extech brand within the Teledyne family of test and measurement companies. ## Compare Other Models in This Series The Digital Mini MultiMeter family comprises two models that share a common compact body, display, and accessory set but differ in their ranging method and measurement function set. The MN35 is the manual-ranging model, and the MN36 is the autoranging model. Both models cover AC/DC voltage to 600 V, DC current to 10 A, resistance with continuity and diode functions, and Type K thermocouple temperature measurement to 1400°F (750°C), and both share the same dimensions, weight, protective rubber holster, and tilt stand. Each model below is its own dedicated product page with condition-matched pricing. Select the new listing for the specific model that fits your measurement requirements and budget. As the manual-ranging model, the MN35 adds a 9 V and 1.5 V battery test function and is powered by a single 9 V battery. The primary differences between the two models are ranging method and the set of available measurement functions. The MN35 is manual-ranging and includes a 9 V and 1.5 V battery test function. The MN36 is autoranging and adds AC current, capacitance, and frequency measurement functions that the MN35 does not provide. The two models also differ in power source: the MN35 runs on a single 9 V battery, while the MN36 runs on two AAA batteries. See the comparison table for the per-model measurement ranges, resolutions, and basic accuracy figures. The MN35 measures resistance to 20MΩ, while the MN36 measures resistance to 40MΩ. Model Ranging AC Current Capacitance **MN36** Autoranging 400µA to 10A 4nF to 100µF MN35 Manual — — Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - Protective rubber holster - Battery - Test leads - Type K thermocouple probe ## Product Core & Specifications Function Range Max. Resolution Basic Accuracy (%rdg+digits) DC Voltage 400mV, 4V, 40V, 400V, 600V 0.1mV ±0.5% AC Voltage 4V, 40V, 400V, 600V 0.1V ±1.2% DC Current 400µA, 4000µA, 40mA, 200mA, 10A 0.1µA ±1.2% AC Current 400µA, 4000µA, 40mA, 200mA, 10A 0.1µA ±1.5% Resistance 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ 0.1Ω ±1.2% Capacitance 4nF, 40nF, 400nF, 40µF, 100µF 0.001nF ±3.0% Frequency 10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz, 5MHz 0.01Hz ±1.0% Temperature \-4 to 1400°F (-20 to 750°C) 1° ±(1%+4°) General Power 2 x AAA batteries Dimensions 5.43x2.83x1.5" (138x72x38mm) Weight 5.4oz (153g) > **Important:** AC Current, Capacitance, and Frequency measurements are available on the MN36 only. ## About this New unit This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order. ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 50.99 USD - **Vendor:** Extech - **Type:** Multi Met - **Tags:** Extech, Manufacturers, Meters & DAQ, Multimeter, product_manual_group_2, Product_new ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 50.99 USD | In stock | ## Images - MN36 Extech Multimeter --- > Source: [ValueTronics](https://valuetronics.com/products/mn36-extech-multimeter-new) > Updated: 2026-06-20