# Rohde & Schwarz FSP30 9 kHz to 30 GHz Spectrum Analyzer (Pre-Owned) # Rohde & Schwarz FSP30 9 kHz to 30 GHz Spectrum Analyzer (Pre-Owned) ## Key Features At A Glance - Five frequency tiers from 9 kHz to 40 GHz across the FSP series (FSP3, FSP7, FSP13, FSP30, FSP40) - Resolution bandwidths from 10 Hz to 10 MHz in 1/3 steps, plus FFT filters from 1 Hz to 30 kHz - EMI bandwidths of 200 Hz, 9 kHz, and 120 kHz (–6 dB) - IEC/IEEE-488 (IEEE 488.2) and RS-232-C interfaces standard with SCPI 1997.0 command set for ATE - Seven trace detectors: max peak, min peak, auto peak, sample, quasi-peak, average, and RMS - 21 cm (8.4") TFT colour VGA display showing up to two independent diagrams - Optional tracking generator, OCXO reference, and integrated preamplifier (separately ordered) The Rohde & Schwarz FSP is a family of spectrum analyzers offered in five frequency tiers — FSP3, FSP7, FSP13, FSP30, and FSP40 — each beginning at 9 kHz and extending to an upper limit of 3, 7, 13.6, 30, or 40 GHz respectively. Frequency resolution reaches 0.01 Hz, and frequencies are read out using a marker or an integrated frequency counter with selectable resolution from 0.1 Hz to 10 kHz. Beyond general spectrum measurements, the FSP platform hosts a broad set of optional application firmware packages for specific signal standards, including GSM/EDGE, 3GPP WCDMA and TD-SCDMA, CDMA2000, Bluetooth, WLAN 802.11a, and WiBro/WiMAX (IEEE 802.16 OFDMA), as well as dedicated phase-noise and noise-figure measurement firmware. Each of these is a separately ordered software option rather than a base-unit feature. ValueTronics stocks and holds its own inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every used unit is inspected and functionally verified in-house before it ships, while new units leave the warehouse factory-sealed exactly as received. ## Brand Heritage Rohde & Schwarz is a privately held German electronics company that has operated under its founders' names since its establishment, with no major corporate rebranding or acquisition changing its identity. ## Compare Other Models in This Series The R&S FSP series comprises five spectrum analyzers that share a common architecture and differ principally in their upper frequency limit. All five models — FSP3, FSP7, FSP13, FSP30, and FSP40 — start at 9 kHz, with maximum frequencies of 3, 7, 13.6, 30, and 40 GHz respectively. Across the series the instruments share the same resolution-bandwidth range, detector set, display, and remote-control interfaces, so the choice between models is driven primarily by the frequency coverage and RF connector system a given measurement requires. Each pre-owned model below is its own dedicated product page with condition-matched pricing. Select the FSP model whose frequency coverage and option compatibility match your application, then choose the pre-owned listing that fits your requirements and budget. The models differ in upper frequency limit (3 GHz to 40 GHz), RF input connector system, and input VSWR — 1.5:1 below 3 GHz rising to 3.0:1 on the higher-frequency models — as shown in the comparison table. Typical weight also ranges from 10.5 kg to 12 kg across the series. Option availability is model-dependent: the electronic attenuator with integrated preamplifier (FSP-B25) is offered only for the FSP3 and FSP7, while the LO/IF ports for external mixers (FSP-B21) are available only on the FSP40. Consult each model's row in the comparison table for its specific frequency range and supported options. Model Frequency Range RF Input VSWR **FSP30** 9 kHz to 30 GHz Test port system 50 Ω, N female, 3.5 mm female 3.0:1 (f <30 GHz) FSP3 9 kHz to 3 GHz N female, 50 Ω 1.5:1 (f <3 GHz) FSP7 9 kHz to 7 GHz N female, 50 Ω 2.0:1 (f <7 GHz) FSP13 9 kHz to 13.6 GHz N female, 50 Ω 2.5:1 (f <13 GHz) Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - Power cable - Compact manual - CD-ROM with operating manual and service manual - Test port adapter with 3.5 mm female (1021.0512.00) and N female (1021.0535.00) connector ## Product Core & Specifications Specification Value Frequency Frequency range 9 kHz to 30 GHz Frequency span 0 Hz, 10 Hz to 30 GHz Typical SSB Phase Noise vs Offset (dBc (1 Hz)) fin = 3 GHz, 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz −74 / −100 / −108 / −108 / −118 dBc fin = 7 GHz, 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz −67 / −94 / −104 / −106 / −118 dBc fin = 13 GHz, 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz −61 / −88 / −98 / −100 / −112 dBc fin = 22 GHz, 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz −57 / −84 / −94 / −96 / −108 dBc fin = 26 GHz, 100 Hz / 1 kHz / 10 kHz / 100 kHz / 1 MHz −55 / −82 / −92 / −94 / −106 dBc Maximum Input Level DC voltage (RF attenuation 0 dB) 0 V CW RF power (RF attenuation 0 dB) 20 dBm Pulse spectral density (RF attenuation 0 dB) 97 dBμV (1 MHz) CW RF power (RF attenuation ≥10 dB) 30 dBm Max. pulse voltage (RF attenuation ≥10 dB) 50 V Max. pulse energy, 10 μs (RF attenuation ≥10 dB) 0.5 mWs 1 dB compression of input mixer (0 dB RF attenuation, f >200 MHz) 0 dBm nominal 3rd-Order Intermodulation (level 2 × −30 dBm, ∆f >5 × RBW or 10 kHz) 20 MHz to 200 MHz \>70 dBc, TOI >5 dBm 200 MHz to 3 GHz \>74 dBc, TOI >7 dBm (typ. 10 dBm) 3 GHz to 7 GHz \>80 dBc, TOI >10 dBm (typ. 15 dBm) 7 GHz to 13.6 GHz \>80 dBc, TOI >10 dBm 13.6 GHz to 30 GHz \>76 dBc, TOI >8 dBm Second Harmonic Intercept Point (SHI) <100 MHz typ. 25 dBm 100 MHz to 1.5 GHz typ. 35 dBm 1.5 GHz to 7 GHz typ. 80 dBm 7 GHz to 13.6 GHz typ. 80 dBm 13.6 GHz to 30 GHz typ. 80 dBm Displayed Average Noise Level (0 dB RF att, RBW 10 Hz, VBW 1 Hz, 20 averages, trace average, span 0 Hz, 50 Ω) 9 kHz <−95 dBm 100 kHz <−100 dBm 1 MHz <−120 dBm, typ. −125 dBm 10 MHz to 1 GHz <−140 dBm, typ. −145 dBm 1 GHz to 3 GHz <−138 dBm, typ. −143 dBm 3 GHz to 7 GHz <−135 dBm, typ. −140 dBm 7 GHz to 13.6 GHz <−132 dBm, typ. −138 dBm 13.6 GHz to 22 GHz <−120 dBm, typ. −128 dBm 22 GHz to 30 GHz <−115 dBm, typ. −123 dBm Frequency Response <50 kHz <+0.5/−1.0 dB 50 kHz to 3 GHz <0.5 dB (σ = 0.17 dB) 3 GHz to 7 GHz <2 dB (σ = 0.7 dB) 7 GHz to 13.6 GHz <2.5 dB (RF attenuation 10 dB, sweep time >1 s/1 GHz) 13.6 GHz to 30 GHz <3 dB (RF attenuation 10 dB, sweep time >1 s/1 GHz) RF Input RF input connector Test port system 50 Ω, N female, 3.5 mm female VSWR (RF attenuation >0 dB), f <30 GHz 3.0:1 General Typical power consumption 150 VA Weight 12 kg > **Important:** Maximum input level: +30 dBm CW RF power with RF attenuation ≥10 dB, and 50 V DC at the RF input. > **Important:** Specifications are valid under the following conditions: 15 minutes warm-up time at ambient temperature, specified environmental conditions met, calibration cycle adhered to, and total calibration performed. > **Important:** Data without tolerances are typical values only. Data designated "nominal" applies to design parameters and is not tested. Data designated "σ = xx dB" is shown as standard deviation. > **Important:** Recommended calibration interval: 2 years for operation with external reference, 1 year with internal reference. > **Important:** Maximum permissible DC input voltage at the RF input is 50 V for the ¸FSP3/¸FSP7/¸FSP13 and 0 V for the microwave-input ¸FSP30/¸FSP40; with option ¸FSP-B29 (frequency range extension 20 Hz) the maximum DC input voltage is 0 V. > **Important:** The ¸FSP30 and ¸FSP40 are supplied with test port adapters; alternate connectors (e.g. 3.5 mm male, N male, K male, 2.4 mm female) are available as recommended extras (see "Recommended extras for alternate connectors"). > Usage tip: for portable or field operation, pair the FSP with the R&S FSP-B30 DC Power Supply and the FSP-B31/-B32 Battery Pack listed in the ordering information. ## About this Pre-Owned unit This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects. - Warranty included - Functional verification included - Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data. - Note that unnecessary accessories may not be included (contact Test Architect to confirm). ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 0.0 USD - 700.0 USD - **Vendor:** Rohde & Schwarz - **Type:** Spec An - **Tags:** Analyzers, Manufacturers, product_manual_group_1, Product_used, Rohde & Schwarz, Spectrum ## Variants | Variant | Price | Available | |---------|-------|-----------| | None | 0.00 USD | In stock | | NIST Traceable | 560.00 USD | In stock | | NIST Traceable with Full Data | 630.00 USD | In stock | | ISO IEC 17025 Accredited | 700.00 USD | In stock | ## Images - Rohde & Schwarz FSP30 9 kHz to 30 GHz Spectrum Analyzer (Pre-Owned) --- > Source: [ValueTronics](https://valuetronics.com/products/fsp30-rohde-schwarz-spectrum-analyzer-used) > Updated: 2026-07-06