# FLIR DM62 True RMS Digital Multimeter # FLIR DM62 True RMS Digital Multimeter ## Key Features At A Glance - True RMS AC/DC voltage and current measurement to 600 V and 10 A across the DM62 and DM66 - CAT IV-300V, CAT III-600V safety category rating for electrical and field service work - Integrated non-contact voltage detector with flashing backlight and audible indicator - Variable-frequency drive (VFD) mode, diode test, resistance to 6 MΩ, and dual-threshold continuity (30 Ω / 480 Ω) - 2 m drop-tested and IP40 rated with compact one-hand design and integral probe holder - MIN-MAX-AVG, relative mode, data hold, and auto power off for everyday field efficiency - DM66 adds low-impedance (LoZ) mode plus capacitance, frequency, and Type-K temperature measurement - Measures AC/DC voltage and current across A, mA, and µA ranges The FLIR DM62 and DM66 are True RMS digital multimeters built for electrical and field service work. They combine a rich feature set, precise measurements, and quality construction with an intuitive one-hand interface designed for fast, efficient troubleshooting and testing of electrical and electronic systems. The DM62 delivers the measurement range and accuracy needed by professionals and capable DIY users alike, while the DM66 carries the full DM62 feature set and extends it for more demanding commercial work. FLIR positions the DM66 for commercial electricians, automation field service, and electronics repair technicians, where its broader function set handles a wide range of diagnostic tasks. Both meters cover the core electrical measurements a field technician reaches for daily — AC and DC voltage and current, resistance, continuity, and diode testing — along with a variable-frequency drive (VFD) mode and an integrated non-contact voltage detector for quick live-circuit checks. ValueTronics stocks and holds its own inventory in a 20,000 square foot secure warehouse at 1675 Cambridge Drive, Elgin, Illinois. Either way, the instrument ships directly from our own shelves. ## Brand Heritage FLIR Systems was acquired by Teledyne Technologies in 2021, becoming part of Teledyne FLIR. ## Compare Other Models in This Series The FLIR DM-series pairs two True RMS digital multimeters — the DM62 and the DM66 — under a single design built for electrical and field service. Both share the same rugged 161 × 80 × 50 mm housing, CAT IV-300V / CAT III-600V safety rating, 2 m drop and IP40 durability, and the same core measurement set spanning AC/DC voltage and current, resistance, diode, and continuity. FLIR describes the DM66 as having all the features of the DM62 plus added capability, so the two are best understood as a shared platform with the DM66 as the more fully featured option. Selecting between them comes down to whether the additional functions — LoZ mode, capacitance, frequency, and temperature — are needed for the work at hand. Each model below is its own dedicated new product page with condition-matched pricing. Compare the DM62 and DM66 here, then open the individual listing for the model and condition that fit your application and budget. The DM66 is the model to choose when ghost voltage is a concern: its low-impedance (LoZ) mode prevents stray voltage from producing false live readings, and it adds capacitance, frequency, and Type-K temperature measurement on top of the shared DM62 feature set. The DM62 and DM66 are identical across their shared measurements — both offer True RMS AC/DC voltage and current to 600 V and 10 A, resistance to 6 MΩ, diode test, dual-threshold continuity, VFD mode, and a non-contact voltage detector. They also share size, weight, battery type, durability ratings, and the limited lifetime warranty. The differences are entirely additive on the DM66: low-impedance (LoZ) AC/DC volts to 600 V, capacitance from 200 nF to 10 mF, a 50 kHz frequency counter, and Type-K thermocouple temperature measurement, none of which the DM62 provides. The DM66 box also includes alligator clips in addition to the silicone test leads supplied with both meters. The comparison table below details each model's measurement ranges side by side. Model Capacitance AC/DC LoZ Volts Frequency Counter **DM62** — — — DM66 200.0 nF to 10.00 mF 600.0 V 50.00 kHz Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - FLIR digital multimeter with integral probe holder - 2 AAA batteries - Silicone test leads - Soft carrying case ## Product Core & Specifications Specification Value Measurements (Both Models) True RMS Yes AC / DC Volts 600.0 V (±1.0% / 0.4%) AC / DC mVolt 600.0 mV (±1.0% / 0.4%) VFD AC Volts 600.0 V (±1.0%) AC / DC Amps 10.00 A (±1.5% / 1.0%) AC / DC mAmps 600.0 mA (±1.0% / 0.7%) AC / DC μAmps 6,000 μA (±1.5% / 1.0%) Resistance 6.000 MΩ (±0.9%) Diode Test 3.000 V (±0.9%) Additional Measurements Continuity Check 30 Ω and 480 Ω Measuring Rate 5 samples per second General Information Auto Power Off Yes Battery 2 AAA batteries Drop Test 2 m IP Rating IP40 Safety Category Rating CAT IV-300V, CAT III-600V Size (H x W x L) 161 × 80 × 50 mm (6.3 × 3.2 × 2.0 in) Weight 334 g (11.8 oz) Warranty Limited lifetime warranty > **Important:** Safety Category Rating: CAT IV-300V, CAT III-600V. ## About this New unit This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order. ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application. **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 95.99 USD - **Vendor:** FLIR - **Type:** Multimeter - **Tags:** Flir, Manufacturers, Meters & DAQ, Multimeter, product_manual_group_2, Product_new ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 95.99 USD | In stock | ## Images - FLIR DM62 True RMS Digital Multimeter --- > Source: [ValueTronics](https://valuetronics.com/products/dm62-flir-multimeter-new) > Updated: 2026-06-27