# RTH-54LP54 Rohde & Schwarz NEW

**Features:**

-   Lab Memory Promotion
-   Handheld Oscilloscope
-   60 MHz, 4 channels (1317.5000B02)
-   5 Gsample/s Sampling Rate
-   Upgradeable to 100 MHz, 200 MHz, 350 MHz, or 500 GHz PLUS upgradeable for MSO capabilities.
-   50,000 waveforms per second
-   High-speed acquisition system with history mode
-   10 bit ADC
-   Deep zoom with 500 ksample acquisition memory
-   Excellent sensitivity: 2 mV/div to 100 V/div
-   Up to 300 V offset range
-   33 automatic measurement functions
-   Isolated, CAT IV

### 5 Instruments in one Handheld Package

-   Lab performance oscilloscope
-   Logic analyzer
-   Protocol analyzer
-   Data logger
-   Digital multimeter (1)  
    (1)  Additional multimeter channel in two-channel model.

### Capacitive Touch and Keypad Operation

-   Full operation via touch panel or keypad
-   See more with a 7" color display
-   Easy parameter adjustment with multifunction wheel
-   Large buttons for use with gloves

### Outstanding Protection 

-   Maximum safety in all environments: CAT IV 600 V/CAT III 1000 V
-   IP51 housing that meets military  environmental requirements
-   Nonslip and impact resistant  rubberized surface

### Excellent connectivity and much more

-   Wireless LAN and Ethernet for web-based remote control and quick data access
-   Finish faster with one-touch documentation
-   MicroSD card and USB device/host support
-   More than 4 hours of battery power

### Superior Performance: A Lab Oscilloscope in a Handheld Package

### Lab Oscilloscope Performance

When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S®Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery-operated handheld device.  
  
Small sensor signals can be analyzed with an excellent vertical sensitivity of 2 mV/div. Triggering on protocol events and decoding protocol data enables convenient debugging of digital control signals. A digital trigger system provides the best trigger sensitivity available in a handheld oscilloscope, and 14 trigger types give the flexibility required to capture exactly the right signal. With 33 automatic measurement functions, the R&S®Scope Rider delivers the capabilities of a lab oscilloscope when analyzing signal parameters.

### Safe Measurements on Power Electronics

Analyzing modern electric drive systems requires measuring motor voltages and currents while analyzing digital control signals. Safety is a key consideration for such  measurements.  
  
The R&S®Scope Rider offers up to four isolated input channels with CAT IV 600 V rating that allow measurements  on high-voltage electronics without compromising safety.  Digital control signals can be analyzed with the 8-bit logic interface that is isolated from the analog input channels. The protocol trigger and decode capability of the   R&S®Scope Rider is unprecedented in handheld oscilloscopes and provides direct display of decoded messages.  
High-speed acquisition system with deep history: Never miss rare faults again

Capturing and analyzing rare anomalies in electric signals  is a typical use case when debugging electronic systems.  With an acquisition rate of up to 50 000 waveforms per  second – more than 1000 times faster than conventional  handheld oscilloscopes – the R&S®Scope Rider sees signals other scopes miss. Rare faults in signals can be reliably captured and analyzed.  
 

In history mode, the instrument automatically stores up to 5000 waveforms in a separate history buffer. At any point in time, acquisition can be stopped and any waveform in the history buffer can be analyzed using the full oscilloscope functionality. One-time anomalies that would have been missed by a conventional handheld oscilloscope can now be analyzed in detail.

The high-speed acquisition system of the R&S Scope Rider captures up to  
50 000 waveforms/s and uncovers rare and unexpected signal  anomalies.

  

### Debugging Power in your hand:  
Five Instruments in One Portable Design

Oscilloscope, logic and protocol analyzer, data  logger and digital multimeter: With the power of  five instruments and dedicated operation modes  for XY operation, roll mode and mask testing, the  R&S®Scope Rider provides the capabilities and  the flexibility needed for debugging all kinds of  electronic systems.  

**\*The image is for reference only. See product specification for details.**

## Details

- **Price:** 7110.0 USD
- **Vendor:** Rohde & Schwarz
- **Type:** Md Oscilloscope
- **Tags:** Buy New Equipment AVADA, Handheld, Manufacturers, Mixed Signal, Mixed Signal Oscilloscope, New, Oscillioscope, Oscilloscope, Oscilloscopes, Other, Other Equipment, Product new, product_manual_group_3, Product_new, Rohde, Rohde & Schwarz

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 7110.00 USD | In stock |

## Images

- RTH-54LP54 Rohde & Schwarz NEW

---

> Source: [ValueTronics](https://valuetronics.com/products/rth-54l-new-rohdes-unassigned-new)
> Updated: 2026-05-21