# DLM80-50E Sorensen DC Power Supply Used

**Features:**

-   High Power Density 2U (3½ inches) high, 19 inches wide; no top or bottom clearance spacing required
    
-   Preview Pushbutton  
    Overvoltage protection (OVP), voltage and current preview buttons allow viewing these set points at any time with or without the output enabled

-   Remote Voltage Sense  
    Sense leads are easily connected to a solderless connector
    
-   Remote Operation  
    \- Standard analog programming  
    \- Output enable/disable remotely  
    \- Optional IEEE-488.2 and RS 232  
    \- Optional optically isolated analog programming
    
-   Calibration  
    All models can be calibrated without removing the covers
    
-   Operating Modes  
    Constant voltage and constant current, with LED indicators
    
-   Parallel or Series Operation  
    Field configurable
    
-   Input Power Factor  
    0.95 typical (three phase for all models) 0.98 typical (single phase)
    

The Sorensen DLM 3 kW and 4 kW Series programmable DC power supplies are designed to provide highly stable, continuously variable output voltage and current for a broad range of applications in a compact 2U ( 3½" high) chassis.

The 4 kW power rating is new to the Sorensen Family of power supplies. The output RMS noise is as low as 10 mV. The output will recover to 1% of its steady-state voltage within 1 ms for a step load change of 100% to 70% or 70% to 100%. The front panel layout makes the series extremely easy to use. Control switches include: power on, enable/ standby and local/remote.

Displays and indicators show programmed set points and operational control status. The programmed voltage, current and overvoltage set points are displayed with two large 3½ digit LED displays. Operational Status LEDs indicate power on, shutdown, overtemperature, overvoltage, constant current and voltage mode status. Control Status LEDs indicate front panel lockout, remote control and standby status. IEEE-488.2 control LEDs indicate error, service request and remote address status. Requires 208/240 VAC Input Power, 50/60 Hz, three phase. 

\*Image is a representation of the item.  Please see product specification for details.

## Details

- **Price:** 0.0 USD
- **Vendor:** Sorensen
- **Type:** DC SUPPLY

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 0.00 USD | In stock |

## Images

- DLM80-50E Sorensen DC Power Supply Used

---

> Source: [ValueTronics](https://valuetronics.com/products/dlm80-50e-sorensen-dc-power-supply-used)
> Updated: 2026-05-21