# SHS1202X Siglent Digital Oscilloscope New **SHS1202X** — SHS1000X / SHS800X Series · Handheld Isolated Oscilloscope — 100/200 MHz, IP51, Battery-Powered ## Key Features At A Glance - 2 analog channels, 200 MHz bandwidth - Sample rate 1 GSa/s (500 MSa/s dual-ch) - 8-bit ADC vertical resolution - Record length 12 Mpts - Built-in 6000-count true-RMS DMM with DCV, ACV, DCI, ACI, R, diode, capacitance, continuity - Includes Sample and Measurement Loggers (Recorder mode) - 5.6" TFT-LCD (640×480) display; 8 + 3 one-button shortcuts - UL2054 certified 6900 mAh lithium battery (external charger) - IP51 rating; UL61010-1, UL61010-2-030, UL61010-2-033 compliance - Isolated, IP51, 6000-count DMM, 6900 mAh battery ## Overview The Siglent SHS1202X is a 200 MHz, 2-channel digital oscilloscope from the SHS1000X / SHS800X Series — part of Siglent's Super Phosphor Oscilloscope family. In summary, this is a 8-bit-resolution, 1 GSa/s (500 MSa/s dual-ch)-sample-rate instrument intended for general benchtop signal capture, mixed-signal debug, serial-bus decoding, and power-supply characterization. ### What is the SHS1202X used for? The SHS1202X is used to capture, view, measure, and analyze electrical waveforms up to 200 MHz. Typical applications: embedded system debug, power-rail characterization, motor and inverter waveform inspection, audio and sensor signal analysis, education, and serial-bus decoding for the protocols listed below. ### What can it trigger on and decode? Edge, Slope, Pulse Width, Window, Runt, Interval, Time-out (Dropout), Pattern. Video trigger / HDTV. Standard serial: I2C, SPI, UART, CAN, LIN. ### Factual grounding — measurement and analysis Data analysis functions include: Search and Navigate; History waveform record up to 80,000 frames; 38 auto measurements with statistics, zoom, gating, Math, History, Reference; 1 Mpts FFT with peaks and markers; Math (+, −, ×, ÷, ∫, d/dt, √). Acquisition and measurement: 12 Mpts record memory with all sampled points available to Math; Security Erase mode; SCPI remote control over isolated USB. The SHS1202X delivers 1 GSa/s (500 MSa/s dual-ch) real-time sampling and 12 Mpts of record length — sufficient to capture long-duration events while preserving timebase resolution for zoom inspection. ### Industry positioning Siglent's handheld line is the value-tier field instrument — IP51-rated for industrial use but, importantly, not CAT III/IV certified, so it is not a Fluke ScopeMeter substitute on mains or distribution panels. The right call for low-voltage electronic service, automotive electronics, and field engineering where occasional waveform viewing is needed alongside a DMM. ## Accessories Supplied - SHS-series handheld oscilloscope with built-in 6000-count DMM - UL2054-certified 10.8 V / 6900 mAh lithium battery pack - External charger / AC adapter - Passive probes (one per channel, model-specific) - DMM test lead set - USB cable (isolated USB host/device) - Quick Start guide; Certificate of calibration ## Product Core & Specifications The SHS1202X acquisition and analysis specifications are listed below. Where the SHS1000X / SHS800X Series family shares architecture across its members, model-specific differences are concentrated in bandwidth, channel count, and (for HD-series) ADC vertical resolution. ### Acquisition Specification Value Analog Channels 2 Bandwidth 200 MHz Max Sample Rate 1 GSa/s (500 MSa/s dual-ch) Vertical Resolution (ADC) 8-bit Record Length 12 Mpts Additional Capability Isolated, IP51, 6000-count DMM, 6900 mAh battery ### Trigger and Serial Decode Edge, Slope, Pulse Width, Window, Runt, Interval, Time-out (Dropout), Pattern. Video trigger / HDTV. Standard serial: I2C, SPI, UART, CAN, LIN. ### Math, Measurement, and Analysis 12 Mpts record memory with all sampled points available to Math; Security Erase mode; SCPI remote control over isolated USB. Data analysis: Search and Navigate; History waveform record up to 80,000 frames; 38 auto measurements with statistics, zoom, gating, Math, History, Reference; 1 Mpts FFT with peaks and markers; Math (+, −, ×, ÷, ∫, d/dt, √). ## Calibration (Factory New) All Factory New Siglent oscilloscopes ship with a factory calibration and certificate as standard. Optional upgrade calibration paths (NIST Traceable, NIST Traceable with Full Data, ISO/IEC 17025 Accredited) can be added at the time of order — please specify your required calibration tier on the order, and ValueTronics will route the unit through the appropriate calibration lab prior to shipment. This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer. ## Details - **Price:** 2759.0 USD - **Vendor:** Siglent - **Type:** Dig Oscilloscope - **Tags:** Authorized New Line, Digital, Factory New, Handheld Oscilloscope, NDAA-Non-Compliant, Oscilloscopes, Product new, product_manual_group_3, SHS1202X, Siglent, Siglent SHS1000X / SHS800X Series, Value Tier ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 2759.00 USD | In stock | ## Images - SHS1202X Siglent Digital Oscilloscope New --- > Source: [ValueTronics](https://valuetronics.com/products/shs1202x-siglent-handheld-digital-oscilloscope-new) > Updated: 2026-05-21