# Tektronix AWG70002B 2-Channel 25 GS/s Arbitrary Waveform Generator (Pre-Owned)

# Tektronix AWG70002B 2-Channel 25 GS/s Arbitrary Waveform Generator (Pre-Owned)

## Key Features At A Glance

-   Sample rates up to 50 GS/s across the series, in single-channel and two-channel models
-   10-bit vertical resolution (9-bit with one marker selected, 8-bit with two markers)
-   Spurious-free dynamic range better than -80 dBc
-   Extended waveform memory up to 32 GSamples with the optional memory license
-   Direct wideband RF generation with carriers up to 20 GHz (model-dependent), removing external RF up-conversion
-   LAN/LXI Class C and USB standard; optional GPIB via TEK-USB-488 adapter for ATE integration
-   Fully operational without an external PC, with built-in touchscreen display and front-panel controls
-   Synchronize multiple units manually or with the AWG Synchronization Hub for multi-channel systems

The Tektronix AWG70000B Series is a family of arbitrary waveform generators built for sample rate, signal fidelity, and waveform memory at the cutting edge, making the instruments suited to the design, testing, and operation of complex components, systems, and experiments. With sample rates reaching up to 50 GS/s and 10-bit vertical resolution, the series is positioned to generate ideal, distorted, and real-life signals from a single box.

The series targets wideband RF and microwave work for communications and defense electronics, including the direct output of wideband RF signals up to 20 GHz. It is applied to validation and compliance testing of high-speed silicon and communications devices, stress testing of receivers with a wide array of signal impairments, coherent optical research, and the generation of high baud-rate baseband signals with higher-order, complex modulation. As a high-speed, low-jitter signal source it also supports leading-edge research in electronics, physics, and chemistry, generating uniquely specified analog signals, fast pulses, data streams, and clocks.

ValueTronics stocks the equipment it sells in its own 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit benefits from that direct-stocking model; pre-owned units are additionally inspected and functionally verified in-house before shipment, while new units ship factory-sealed exactly as received.

## Brand Heritage

Tektronix, founded in 1946, was acquired by Danaher Corporation in 2007. In 2016 it became part of Fortive Corporation, the operating company that Danaher spun off that year, and continues to operate under the Tektronix brand.

## Compare Other Models in This Series

The AWG70000B Series comprises two models that share a common 10-bit architecture: the single-channel AWG70001B with sample rates up to 50 GS/s, and the two-channel AWG70002B with sample rates up to 25 GS/s. All specifications apply to both models unless noted otherwise, and both deliver the series' spurious-free dynamic range and waveform-fidelity characteristics.

Each model below is a distinct instrument with its own channel count, maximum sample rate, and effective frequency output, while sharing the same run modes, sequencer behavior, marker and trigger architecture, and software plug-in ecosystem.

Each pre-owned model in this series is its own dedicated product page with condition-matched pricing. Select the model below that matches your channel-count and sample-rate requirement to view its specifications and current pre-owned availability.

The two models differ along several axes documented in the comparison table. The AWG70001B is a single-channel instrument with a maximum sample rate of 50 GS/s and a specified effective frequency output of 20 GHz, while the AWG70002B is a two-channel instrument with a maximum sample rate of 25 GS/s and a specified effective frequency output of 10 GHz. Extended waveform memory reaches up to 32 GSamples on the AWG70001B and up to 16 GSamples per channel on the AWG70002B.

Additional differences include rise/fall time, output flatness, serial data bit rate, and channel-timing characteristics such as channel-to-channel skew, which apply to the two-channel AWG70002B only. The single-ended AC-coupled output amplifier (Option AC) is available on the AWG70001B. Consult the comparison table that follows for the exact per-model values.

Model

Sample Rate

Channels

Max RF Output Frequency

**AWG70002B**

1.5 kS/s - 25 GS/s

2

10 GHz

AWG70001B

1.5 kS/s - 50 GS/s

1

20 GHz

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

## Accessories Supplied

-   Analog output Planar Crown 7005A-1 SMA female adapters (preinstalled): four (131-8689-xx)
-   One 50 Ω SMA terminator per channel (015-1022-xx)
-   Installation and safety manual (specify language option at time of order)
-   Certificate of calibration
-   Power cord (specify power cord option at time of order)

## Product Core & Specifications

Specification

Value

Digital to Analog Converter

Sample rate

1.5 kS/s - 25 GS/s

Resolution

10 bit (no markers selected), 9 bit (one marker selected), or 8 bit (two markers selected)

Number of channels

2

DAC Resolution

8-bit, 9-bit, or 10-bit

Hardware Characteristics

Run mode — Continuous

Waveform is continuously repeated

Run mode — Triggered

Waveform is output only once after a trigger is received

Run mode — Triggered Continuous

Waveform is continuously repeated after a trigger is received

Waveform memory

Standard: up to 2 GSamples per channel; With extended memory: up to 16 GSamples per channel

Minimum waveform length (Triggered run modes)

2400 points

Minimum waveform length (Continuous run mode)

1 point

Waveform granularity (Continuous run mode)

1 point

Waveform granularity (Triggered run modes)

1 point

Waveform interleaving

Non-interleaved at all sample rates

Analog Output Characteristics

Number of channels

2 channels

Connector type

Aeroflex/Weinschel Planar Crown Universal Connector System with SMA female adapter

Output impedance

50 Ω

Effective frequency output

10 GHz

Bandwidth

13.5 GHz

Output amplitude — Range

500 mVp-p to 1 Vp-p

Output amplitude — Resolution

1.0 mV

Output amplitude — Accuracy

±(2% of amplitude + 1 mV)

Rise/fall time

< 22 ps

Serial data bit rate

6.25 Gb/s

Output flatness

+0.8 dB to -1.5 dB up to 10 GHz

Output match, SWR

DC to 10 GHz = 1.61:1

Channel Timing Characteristics (AWG70002B only)

Channel to channel skew

±5 ps

Output skew control — Range

\-100 ps to 100 ps

Output skew control — Resolution

500 fs

Output skew control — Accuracy

±5 ps

Intra-channel skew

<5 ps

Trigger Input Characteristics

Number

2 (A and B)

Polarity

Positive or negative selectable

Impedance

50 Ω, 1 kΩ

Range

50 Ω: <5 V; 1 kΩ: ±10 V

Threshold — Range

\-5.0 V to 5.0 V

Threshold — Resolution

0.1 V

Threshold — Accuracy

±5% of the setting + 0.1 V

Trigger to output delay — Asynchronous

8625/(fclk + 20 ns) ±20 ns (710 ns @ fclk = 12.5 GHz, 25 GSps)

Trigger to output delay — Synchronous

8120/(fclk + 20 ns) ±20 ns (670 ns @ fclk = 12.5 GHz, 25 GSps)

Trigger minimum pulse width

20 ns

Trigger hold-off

8320/fclk ±20 ns

Sequencer

Maximum repeat count

2^20 counts (1,048,576 counts)

Maximum sequencing steps

16,383

Subsequencing

Single level depth

Waveform granularity resolution

1

Minimum waveform length

2400 points

Output Distortions — Harmonic Distortion (Sample rate = 25 GS/s)

2nd harmonic, < 2 GHz

< -60 dBc

2nd harmonic, 2 GHz - 6 GHz

< -50 dBc

2nd harmonic, > 6 GHz

< -42 dBc

3rd harmonic, < 1 GHz

< -60 dBc

3rd harmonic, 1 GHz - 2 GHz

< -50 dBc

3rd harmonic, > 2 GHz

< -40 dBc

Effective number of bits (ENOB)

5.6 bits at 9.99 GHz; All noise and distortion DC - 12.5 GHz

Jitter — Random

250 fs RMS

Jitter — Total

10 ps p-p at 12.5 Gb/s

Spurious Free Dynamic Range (SFDR) — AWG70001B and AWG70002B operating at 25 GS/s (In band / Adjacent band)

100 MHz

In band: DC - 1 GHz, -80 dBc; Adjacent band: DC - 10 GHz, -72 dBc

0 - 500 MHz

In band: DC - 500 MHz, -70 dBc; Adjacent band: DC - 1.5 GHz, -66 dBc

DC - 1 GHz

In band: DC - 1 GHz, -63 dBc; Adjacent band: DC - 3 GHz, -63 dBc

DC - 2 GHz

In band: DC - 2 GHz, -62 dBc; Adjacent band: DC - 6 GHz, -60 dBc

DC - 3 GHz

In band: DC - 3 GHz, -60 dBc; Adjacent band: DC - 6 GHz, -52 dBc

DC - 5 GHz

In band: DC - 5 GHz, -52 dBc; Adjacent band: DC - 6 GHz, -52 dBc

Connector

SMA (rear panel)

> **Important:** On the AWG70001B the 50 GS/s sample rate is enabled by the mandatory AWG70000-150 license, and the waveform plug-ins each require a separate node-locked or floating license before they are fully functional.

> **Important:** The 50 GS/s sample rate license (AWG70000-150) is a mandatory selection for the AWG70001B; the AWG70002B requires the BASIC base configuration as a mandatory selection.

> **Important:** Sequencing (SEQ) and Streaming ID (STRID) options require an export control license; Streaming ID also requires the SEQ option.

> **Important:** The Sequencer is a firmware upgrade that allows the user to run a sequence of waveforms; it runs independent channels except for the clock.

> **Important:** Plug-ins require the purchase of a license before they are fully functional; two license types are available per plug-in: node-locked (NL), permanently assigned to a product model/serial number, and floating (FL), which can be moved between product models.

> **Important:** Spurious Free Dynamic Range (SFDR) specifications are measured with a balun at maximum sample rate. Baluns, bias tees, power splitters, amplifiers, and adapters listed under Recommended Accessories are not part of the standard delivery and must be ordered separately.

> **Important:** GPIB control requires the external TEK-USB-488 GPIB to USB adapter, which is not included in the standard accessories.

> **Important:** Derate maximum operating temperature by 1 °C per 300 meters above 1500 meters.

> Recommended pairing: use the AWGSYNC01 Synchronization Hub to synchronize multiple AWG70000 Series units into a multi-channel high-speed AWG system, as listed in the recommended accessories.

## About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

-   ValueTronics warranty included.
-   Functional verification included.
-   Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
-   Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

**Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.**

## Details

- **Price:** 0.0 USD
- **Vendor:** Tektronix
- **Type:** Arb Gen
- **Tags:** Arbitrary Generator, AWG70002, AWG70002B, Inc., Manufacturers, Model 70002, Pre-Owned, product_manual_group_3, Product_used, Tektronix

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 0.00 USD | In stock |

## Images

- Tektronix AWG70002B 2-Channel 25 GS/s Arbitrary Waveform Generator (Pre-Owned)

---

> Source: [ValueTronics](https://valuetronics.com/products/awg70002b-tektronix-arbitrary-waveform-generator-used)
> Updated: 2026-06-02