# Keysight N2752A 6 GHz InfiniiMode Differential Probe # Keysight N2752A 6 GHz InfiniiMode Differential Probe ## Key Features At A Glance - Comprehensive probe and accessory selection guide for InfiniiVision 1000 X-, 2000 X-, 3000A/T X-, 4000 X-, 6000 X-, 5000, 6000, and 7000 Series oscilloscopes - Covers passive probes from 20 MHz to 700 MHz, high-voltage passive probes to 3.7 kV, and the InfiniiMax active probe system to 7 GHz - Includes single-ended and differential active probes, InfiniiMode probes with selectable measurement modes, and high-voltage differential probes to 2 kV - Documents AC/DC clamp-on current probes, Rogowski coil current probes to 3,000 Apk, and high-sensitivity current probes measuring down to 50 µA - Provides MSO logic probe compatibility, wedge probe adapters for surface-mount IC probing, and the T2A adapter for TekProbe-BNC level 2 probe compatibility - Includes a probe compatibility matrix matching every probe model to recommended, compatible, or incompatible oscilloscope series - Covers extreme-temperature probing accessories rated from -40 to +85 °C for environmental chamber testing The Keysight InfiniiVision Oscilloscope Probes and Accessories Selection Guide is a reference catalog covering the full probe and accessory ecosystem designed for use with Keysight InfiniiVision Series oscilloscopes, including the 1000 X-, 2000 X-, 3000A/T X-, 4000 X-, 6000 X-, 5000, 6000, and 7000 Series instruments. The guide is organized by probe category, with detailed compatibility tables, electrical characteristics, accessory part numbers, and ordering information for every supported model. The guide is used by engineers and technicians selecting probes for specific measurement applications across the InfiniiVision oscilloscope range. It documents passive probes for general-purpose voltage measurement, high-voltage passive probes for measurements up to 3.7 kV, the InfiniiMax active probe system for high-bandwidth single-ended and differential measurements, InfiniiMode probes with selectable differential, single-ended, and common-mode operation, high-voltage differential probes for floating measurements in power electronics and motor drive testing, single-ended active probes for low-loading high-frequency probing, MSO logic probes for mixed-signal oscilloscope digital channels, clamp-on AC/DC current probes for non-invasive current measurement, Rogowski coil current probes for large AC currents in confined spaces, high-sensitivity current probes for low-level current consumption analysis, wedge probe adapters for surface-mount IC connections, and the T2A interface adapter that enables selected TekProbe-BNC level 2 probes to be used with the Keysight AutoProbe interface. ValueTronics International, LLC stores and tests every instrument and accessory in its 20,000 sq ft secure warehouse at 1675 Cambridge Drive, Elgin, Illinois. Each Keysight InfiniiVision probe and accessory passes through our in-house inspection and verification process before shipping. Unlike drop-shippers and pass-through brokers, we hold inventory in our own facility, which means we can confirm exact configurations, verify accessory completeness, and match the specific probe model and option set to your InfiniiVision oscilloscope series before the order is committed. ## Brand Heritage Keysight Technologies was spun off from Agilent Technologies in 2014, taking with it the electronic measurement product lines that Agilent itself had inherited from the test and measurement division of Hewlett-Packard following the 1999 HP corporate split. The InfiniiVision oscilloscope family and its AutoProbe interface trace their engineering lineage through this HP-to-Agilent-to-Keysight history. ## Compare Other Models in This Series The Keysight InfiniiVision probe and accessory ecosystem spans seven oscilloscope series (1000 X, 2000 X, 3000A/T X, 4000 X, 6000 X, 5000, 6000, and 7000) and dozens of probe models grouped by probing technology: passive probes for general-purpose voltage measurement, active probes for high-bandwidth and low-loading applications, differential probes for floating and high-voltage measurements, current probes for AC/DC current measurement, MSO logic probes for digital channel input, and a range of mechanical accessories including wedge adapters, positioners, racking, and carrying cases. Selection within the family is driven by oscilloscope-series compatibility (governed by the AutoProbe interface presence and version), required bandwidth, measurement type (single-ended, differential, common-mode, or current), input voltage range, and environmental operating conditions. The selection guide's compatibility table is the primary tool for confirming that a chosen probe model is recommended, compatible, or incompatible with the host oscilloscope before ordering. Each new probe and accessory configuration listed in this guide is offered as its own line item with condition-matched pricing. Confirm the specific probe model, option string, and accessory kit content against the oscilloscope-series compatibility table before placing the order. This datasheet is a selection guide rather than a single-instrument datasheet. It documents the full probe and accessory family for the InfiniiVision oscilloscope range. Model-specific characteristics, accessories, and ordering information are organized by probe category in the sections of this guide. The principal differences between probe sub-families documented in this guide are: bandwidth range (from 20 MHz general-purpose passive probes through 7 GHz InfiniiMax active probes), interface type (BNC versus AutoProbe), measurement mode (single-ended, differential, common-mode, current, or logic), input voltage and current range (signal-level through 3.7 kV high-voltage and 3,000 Apk current), and environmental operating range (standard bench versus the extreme-temperature N7007A passive probe and N7013A differential extension kit rated -40 to +85 °C). Oscilloscope-series compatibility is the dominant constraint. Active probes with the AutoProbe interface require an oscilloscope chassis that provides that interface; the DSO 1000 X- and MSO/DSO 2000 X-Series do not support AutoProbe active probes, while the 4000 X- and 6000 X-Series support the Infiniium AutoProbe interface with up to four active probes per chassis. Refer to the probe compatibility table in this guide for the specific recommended, compatible, or incompatible status of each probe model against each oscilloscope series. Model Probe Type Bandwidth Attenuation Ratio **N2752A** InfiniiMode Active Differential 6 GHz 2:1 / 10:1 N2142A Passive 75 MHz at 10:1, 6 MHz at 1:1 1:1/10:1 switchable N2140A Passive 200 MHz at 10:1, 6 MHz at 1:1 1:1/10:1 switchable 10070D Passive 20 MHz 1:1 Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below. ## Accessories Supplied - Two solder-in tips - Two socketed tips - Two browser tips ## Product Core & Specifications Parameter Value Probe bandwidth (-3 dB) 6 GHz Rise time, probe only (10 to 90%) 58.3 ps Input resistance (at DC) 200 kΩ ± 2% (differential); 100 kΩ ± 2% (single-ended); 50 kΩ ± 2% (common mode) Input capacitance 700 fF (with browser) Attenuation ratio (at DC) 2:1 / 10:1 Input dynamic range ± 1 V, 2 Vpp (at 2:1) / ± 5 V, 10 Vpp (at 10:1) Maximum non-destructive input voltage ± 30 V (DC + peak AC) **Important:** The DSO 1000 X- and MSO/DSO 2000 X-Series do not support AutoProbe interface active probes. The MSO/DSO 6000A 100-MHz models do not support any Keysight active probes with the AutoProbe interface. Confirm AutoProbe compatibility against the probe compatibility table before ordering active probes for these scope models.**Important:** The 1000 X- and 2000 X-Series oscilloscopes do not support AutoProbe interface active probes.**Important:** The 4000 X- and 6000 X-Series oscilloscopes come with the Infiniium AutoProbe interface for higher probe power support.**Important:** DP0001A is not compatible with the 3000A X-Series oscilloscope.**Important:** MSO/DSO6000A 100 MHz models do not support any Keysight active probes with AutoProbe interface.**Important:** The 01650-61607 logic probe cable is no longer available for purchase. Without the 01650-61607 40-pin to 40-pin cable, 40-pin Mictor, Samtec or Soft Touch probes you may already own cannot be used with InfiniiVision MSOs.**Important:** The N2779A power supply is required to power the N2780B/81B/82B/83B/83L current probes; these probes do not operate without it.**Important:** The N7026A current probe's widest input range (30 Arms/40 Apk) requires the external AC power adapter that comes with the probe. Without the external power adapter, the input range is limited to 5 Arms or 5 Apeak.**Important:** Probe compatibility varies by InfiniiVision oscilloscope series and firmware version; consult the Probe Compatibility Table for the specific scope model before ordering.**Important:** The N7013A extreme temperature extension cable kit derates probe bandwidth: 70 MHz with DP0001A, N2818A, N2792A, N2790A; 25 MHz with N2791A.**Important:** The N2744A T2A adapter supports only the specific Tektronix TekProbe-BNC level 2 probes listed in the datasheet; other Tek probes are not supported.Recommended pairing: when ordering a Keysight oscilloscope probe, confirm the matching accessory kit listed in the selection guide for that probe family (for example, the N2856A kit for N2862B/63B/89A/90A passive probes, the N2816A kit for the N2804A differential probe, or the N7013A extreme temperature extension cable kit when probing differential signals inside environmental chambers). **Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.** ## Details - **Price:** 10907.0 USD - **Vendor:** Keysight - **Type:** Accessory - **Tags:** Differential, Keysight, Keysight Technologies, Manufacturers, Other Equipment, Probe, product_manual_group_3, Product_new ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 10907.00 USD | In stock | ## Images - N2752A Keysight Technologies Differential Probe --- > Source: [ValueTronics](https://valuetronics.com/products/n2752a-keysight-differential-probe-new) > Updated: 2026-05-30