# ADG-PLUS-800-63 Preen DC Power Supply New ## Key Features at a Glance - Output power 30 kW to 1800 kW per system (via Master/Slave parallel up to 6 units) - Output voltage 40 V to 1600 V; currents up to 2500 A in low-voltage/high-current models - Optional Solar Array Simulation per EN 50530, SAS, and Sandia test regulations - Optional I-V Curve Simulation Remote Control Software - CV / CC / CP operating modes with built-in STEP and RAMP programming - Transient response ≤ 6 ms; voltage ripple ≤ 0.1 % F.S. - Standard RS-232 / RS-485 / Ethernet / USB / Analog; optional GPIB - Optional Reverse Current Protection Module ## ADG-PLUS-800-63 — High Power Programmable DC Power Supply (50kW/800V/63A) In summary, the Preen ADG-PLUS-800-63 is part of the ADG+ Series, a high-power-density programmable DC power supply delivering 30 kW to 1800 kW (via parallel) per system, with output voltage from 40 V to 1600 V and currents up to 2500 A. The Preen ADG+ Series is a high-power-density programmable DC power supply delivering 30 kW to 1800 kW (via parallel) per system, with output voltage from 40 V to 1600 V and currents up to 2500 A. Built on DSP control, ADG+ delivers fast transient response (≤ 6 ms), low ripple (≤ 0.1 % F.S.), and CV/CC/CP operating modes for EV battery, photovoltaic, motor controller, and fuel-cell testing. ### What is the ADG-PLUS-800-63 used for? The ADG-PLUS-800-63 is used across EV motor controller test, DC/DC converter aging, server power supply burn-in, photovoltaic inverter Solar Array Simulation, battery emulation, and high-current fuse / breaker / contactor verification. Specific test methodologies include static and dynamic MPPT efficiency validation, EN 50530-compliant solar array simulation, battery pack discharge profile playback, and high-current DC pulse testing. ### Where does the ADG-PLUS-800-63 fit in a typical lab workflow? The ADG-PLUS-800-63 integrates into bench, ATE, and high-power production environments through standard RS-232, RS-485, Ethernet, and USB control. Engineers use it to repeatably simulate global mains and DUT operating conditions during design verification, certification pre-compliance, and end-of-line testing — replacing manual variac/MG-set configurations and improving test repeatability and data capture. From a measurement standpoint, the ADG+ Series is benchmarked against EN 50530, SAS, Sandia test regulations; RoHS Compliant; CE Marked. Within this product line the ADG-PLUS-800-63 delivers the variant-specific output described in this model's specification block below — chosen to match the most common DUT power, voltage, and frequency requirements in the target application. Preen (AC Power Corporation, founded 1989) is one of the world's highest-volume programmable power-source manufacturers, with ISO 9001:2015 certified manufacturing facilities in Taipei, Tianjin, and Suzhou, and a U.S. service center in Irvine, California. Preen products carry CE and RoHS certifications and have been recognized with multiple Taiwan Excellence Awards for the AFV, AFV-P, and ADG-P product lines — placing the brand in the established commercial tier alongside California Instruments, Chroma, and Pacific Power Source. ### How does it compare to alternative AC/DC sources? - Compared with California Instruments and Pacific Power Source: Preen typically offers 10–20% lower pricing with strong multi-phase capability — ideal for budget-conscious compliance labs and three-phase applications. - Compared with Chroma 61800 series: Preen provides comparable programmability and broader high-power three-phase coverage at competitive ASP. - For avionics 400 Hz testing, Preen frequency-converter options (AFC) and AFV+ Type-C 300–840 Hz cover MIL-STD-704 / DO-160 workflows. ## Accessories Supplied - Three-phase input power cabling - Operation manual - PC remote control software (download) - Calibration certificate (when applicable) ## Specifications Specifications below are for the ADG+ Series. The ADG-PLUS-800-63 variant within this series is configured as: **High Power Programmable DC Power Supply (50kW/800V/63A)**. Specification Value **AC Input** 3Ø3W+G 323–460 Vac (optional 200/208/415/440/480 Vac) **Input Frequency** 47–63 Hz **Input Power Factor** ≥ 90 % at max power **DC Output Voltage** 40 V to 1600 V (model-dependent) **DC Output Current** Up to 2500 A (model-dependent) **Voltage Ripple (RMS)** ≤ 0.1–0.4 % F.S. (model-dependent) **Load Regulation** ≤ 0.02–0.1 % **Voltage Slew Rate** ≤ 50–150 ms (model-dependent) **Transient Response** ≤ 6–20 ms (model-dependent) **Operating Modes** CV / CC / CP **Efficiency** ≥ 87–90 % at max power **Protections** OVP, OCP, OPP, OTP, LDC OV, Module OCP, Interlock open **Remote Interfaces** Standard: RS-232 / RS-485 / Ethernet / USB / Analog · Optional: GPIB **Isolation** Input-Enclosure 1500 Vac · Input-Output 2000 Vdc · Output-Enclosure 2000 Vdc **Operating Temperature** 0 °C to 40 °C ## Unit Options The ADG-PLUS-800-63 accepts the following factory-installed options. Multiple options may be selected. _(select all that apply — multi-select)_ - **ADG-PLUS-001** — GPIB Interface Converter - **ADG-PLUS-002** — Cable for RS-485 (10 m) - **ADG-PLUS-003** — 200 V / 208 V Input Voltage (30–50 kW) - **ADG-PLUS-004** — 480 V Input Voltage (30–50 kW) - **ADG-PLUS-005** — 200 V / 208 V Input Voltage (100 kW) - **ADG-PLUS-006** — 480 V Input Voltage (75–100 kW) - **ADG-PLUS-007** — I-V Curve Simulation and Remote Control Software - **ADG-PLUS-008** — 200 V / 208 V Input Voltage (75 kW) - **ADG-PLUS-009** — Reverse Current Protection Module ## Calibration Options Factory calibration is provided with each new ADG-PLUS-800-63 per the manufacturer's datasheet. Additional ISO 17025-accredited or Z540.1 calibration upgrades are available on request — contact your Test Architect to scope. This webpage was written by a human with an A.I. 'Intern', which may contain errors. Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer. ## Details - **Price:** 24810.0 USD - **Vendor:** Preen - **Type:** Dc Supply - **Tags:** ADG+ Series, adg-plus, adg-plus-800-63, analog, battery-test, ce-marked, DC Power Supply, en-50530, ethernet, ev-test, gpib, high-power, Manufacturers, master-slave-parallel, mppt, Power Supplies & Loads, Preen, product_manual_group_1, product_manual_group_3, Product_new, programmable-dc, rohs-compliant, rs232, rs485, solar-array-simulation, usb ## Variants | Variant | Price | Available | |---------|-------|-----------| | Default Title | 24810.00 USD | In stock | ## Images - ADG-PLUS-800-63 Preen DC Power Supply New --- > Source: [ValueTronics](https://valuetronics.com/products/adg-plus-800-63-preen-dc-power-supply-new) > Updated: 2026-05-21